Kia Rio5 Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(34)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(34)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Kia Rio5 Wheel Bearings Replacement is $197 with $57 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2008 Kia Rio5L4-1.6LService typeWheel Bearings - Driver Side Front ReplacementEstimate$316.06Shop/Dealer Price$349.38 - $438.81
2006 Kia Rio5L4-1.6LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$304.35Shop/Dealer Price$335.37 - $423.08
2009 Kia Rio5L4-1.6LService typeWheel Bearings - Driver Side Front ReplacementEstimate$304.35Shop/Dealer Price$335.40 - $423.14
2008 Kia Rio5L4-1.6LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$410.15Shop/Dealer Price$478.05 - $677.56
2007 Kia Rio5L4-1.6LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$410.15Shop/Dealer Price$479.52 - $680.14
2011 Kia Rio5L4-1.6LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$410.15Shop/Dealer Price$478.19 - $677.81
2006 Kia Rio5L4-1.6LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$410.15Shop/Dealer Price$478.06 - $677.59
2011 Kia Rio5L4-1.6LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$410.15Shop/Dealer Price$478.05 - $677.56
Show example Kia Rio5 Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Kia mechanics

Real customer reviews from Kia owners like you.

Excellent Rating

(34)

Rating Summary
33
0
0
0
1
33
0
0
0
1

Ben

42 years of experience
1589 reviews
Ben
42 years of experience
Kia Rio5 L4-1.6L - Wheel Bearings Replacement (Driver Side Front) - Houston, Texas
Ben was absolutely a delight! He was so patient and friendly with me, knew exactly what to do with my car, and genuinely listened to my questions and explained everything to me.

Robert

21 years of experience
1307 reviews
Robert
21 years of experience
Kia Rio5 L4-1.6L - Check Engine Light is on - Denver, Colorado
Done quickly while I was at work. He very knowledgeable and friendly.

Chris

23 years of experience
2372 reviews
Chris
23 years of experience
Kia Rio5 L4-1.6L - 75 Point Safety Inspection - Laguna Niguel, California
Very knowledgeable and competent in prioritizing and executing the diagnostic process I will definitely recommend and use Chris in the future

Kevin

7 years of experience
111 reviews
Kevin
7 years of experience
Kia Rio5 L4-1.6L - Valve Cover Gasket - Kissimmee, Florida
Kevin was absolutely fantastic. Professional, knowledgeable, and honest. Will definitely request him again!!!

Excellent Rating

(34)

Rating Summary
33
0
0
0
1
33
0
0
0
1
Number of Kia Rio5 services completed
374+
services done by our mechanics
TOTAL NUMBER OF EXPERT Kia MECHANICS
1100+
experts on our platform

Recent articles & questions

Alaska Speed Limits, Laws, and Fines
Following Following is an overview of the laws, limits, and fines as they relate to speeding traffic violations in the state of Alaska. Speed limits in Alaska 65 mph: specified areas of the Alaska interstate and on some rural freeways....
Do All Vehicles Have an OBD System?
Today’s Today’s cars are equipped with sophisticated technology. The OBD system (on-board diagnostics) is actually advanced enough to monitor several critical systems on your vehicle and warn you when something starts to go wrong, which can prevent serious damage in...
How to Drive Cross Country
Driving cross country (https://www.yourmechanic.com/article/5-essential-things-to-know-before-driving-on-country-roads) is a fun and exciting way to spend vacation time, especially when traveling with family. But before setting out on your epic journey, you need to keep in mind a few factors. You need to fully...

How do you change the language on the message center?

Your car is automatically set to display information in English in the message center. However, if English isn’t your preferred language, you can change it to another option. Here’s how to do that: Cycle through your options until you see...

Check engine light on after storage.

Autozone cannot hook a code reader to any vehicle manufactured before 1996 generally because these are not OBD-II equipped vehicles. An experienced technician like one from YourMechanic however is capable of pulling the check engine light fault codes fro the...

My check engine light came on...car isn't overheating no change in engine temp gauges..autozone used one of their testing gages sa

There are several possible reasons for a check engine light (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) to come on. Typically, when the check engine light appears, the first step is to pull the diagnostic codes out of the computer with a scan tool, like you...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com