Kia Borrego Transfer case fluid is dirty Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(13)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(13)

Transfer case fluid is dirty Inspection Service

How much does a Transfer case fluid is dirty Inspection cost?

On average, the cost for a Kia Borrego Transfer case fluid is dirty Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2010 Kia BorregoV6-3.8LService typeTransfer case fluid is dirty InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2011 Kia BorregoV8-4.6LService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2011 Kia BorregoV6-3.8LService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2010 Kia BorregoV8-4.6LService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2009 Kia BorregoV6-3.8LService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2009 Kia BorregoV8-4.6LService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example Kia Borrego Transfer case fluid is dirty Inspection prices

A transfer case is unique to all-wheel drive and four-wheel drive vehicles, sending power from the engine to the rear wheels. The transfer case is a sealed unit and may be either gear-driven or chain-driven depending on the manufacturer. Because the transfer case is a sealed unit, it requires lubrication to keep all of the moving parts clean and at a reasonable temperature. Transfer case fluid ensures the longevity of parts in the transfer case.

How this system works:

In four-wheel drive and all-wheel drive vehicles, a transfer case is either connected directly to the back of the transmission, or by a small driveshaft further back in the vehicle. When activated, the transfer case takes power from the engine to the back wheels. Depending on the kind of vehicle, power may go to the rear wheels on a full-time or part-time basis. All-wheel drive systems are typically on all of the time while a four-wheel drive system are activated by either pressing a button in the vehicle or by manipulating a selector lever, typically located near the transmission hump on the floor. In both systems, transfer case fluid keeps the internal parts of the transfer case lubricated. Over time, transfer case fluid will become dirty and break down. When transfer case fluid breaks down you may notice shuddering from the vehicle while turning or a whining noise from the gears in the transfer case.

Common reasons for this to happen:

  • Time: Over time, transfer case fluid will break down and become dirty. Dirty transfer case fluid may cause moving parts in the transfer case to have more difficulty moving, which may cause them to fail.

  • Improper Filling: If the transfer case is not properly filled with transfer case fluid, it may break down more quickly, have difficulty dissipating heat, and keeping parts lubricated.

What to expect:

A top-rated mobile mechanic will come to your home or office and determine whether or not your transfer case fluid needs to be replaced. If it does, he or she will then provide a detailed inspection report outlining the reason the fluid needed to be replaced and the cost of any repairs that may need to be made.

How it's done:

A mechanic will first have your vehicle idle for a few minutes to warm the fluid as warm fluid will drain easier. The mechanic will then drain the old transfer case fluid through the drain plug. The drain plug on most transfer cases is magnetic and picks up metal shavings that otherwise might potentially damage components in the transfer case. The mechanic should clean the drain plug before replacing it. The mechanic will then remove the fill plug and add new fluid. The mechanic should also double-check the amount of fluid, he or she puts in the transfer case, ensuring that it was done properly. A vehicle that is under-lubricated may not dissipate heat or protect critical components as well as a vehicle that is properly lubricated. When the transfer case is full, the mechanic will replace the fill plug and check for any leaks.

How important is this service?

By choosing to not replace your transfer case fluid, you may compromise critical and expensive components inside the transfer case. Because the transfer case is a sealed unit, it is very important that the transfer fluid is filled properly so that heat is appropriately dissipated and components to not suffer from unneeded friction. Repairing a differential can be very expensive, so in order to preserve these components, you should have you transfer case fluid replaced at the correct intervals. Doing so could potentially save you a lot of money down the road.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Kia mechanics

Real customer reviews from Kia owners like you.

Excellent Rating

(13)

Rating Summary
13
0
0
0
0
13
0
0
0
0

Wendy

11 years of experience
10 reviews
Wendy
11 years of experience
Kia Borrego V6-3.8L - Oil Change - Albuquerque, New Mexico
I was not actually here, but from the email and text notifications, and call very good customer service. I do question the one item, transmission fluid condition. Since the Borrego has NO dipstick, without actually pulling the drain plug (which I assume was not done) there is no way to know the condition of the fluid. Otherwise, great.

Harish

27 years of experience
588 reviews
Harish
27 years of experience
Kia Borrego V6-3.8L - Oil Change - Charlotte, North Carolina
Always early 

Travis

13 years of experience
579 reviews
Travis
13 years of experience
Kia Borrego V6-3.8L - Warning Light is on - Minneapolis, Minnesota
Did a good job!

Collins

12 years of experience
488 reviews
Collins
12 years of experience
Kia Borrego V6-3.8L - Alternator - Marietta, Georgia
He did a great job. I would recommend him 

Excellent Rating

(13)

Rating Summary
13
0
0
0
0
13
0
0
0
0
Number of Kia Borrego services completed
143+
services done by our mechanics
TOTAL NUMBER OF EXPERT Kia MECHANICS
1000+
experts on our platform

Recent articles & questions

How Does a Defroster Work?
We’ve We’ve all been there. You slide behind the wheel, crank the engine and then stop. You realize that you really can’t go anywhere because your windshield is fogged up. Thankfully, you can just turn on the defroster and let...
How to Renew Your Car Registration in Alaska
In In order to drive on the Alaskan roadways legally, you will have to get your car registered with the DMV. Every two years, the registration that you have will need to be renewed. You will generally be issued a...
How to Fill a Windshield Wiper Fluid Reservoir
Driving Driving with a dirty windshield is not only a distraction, but it can make navigating roads difficult and dangerous as well. Dirt, grime, and mud can eventually smudge your windshield so completely that it becomes impossible to drive. Keeping...

The new ignition is locked, cannot turn over

Hello. When you install a new ignition and a new computer, it needs to be reprogrammed to communicate correctly. This can usually only be done at the dealer. If they are not programmed correctly then the computers will not communicate...

I have a Jeep Wrangler tj that fuel pump works relay works there is power all the way back into the harness but will not turn on.

Hi Davian. Thanks for contacting us today. When this occurs, it usually is caused by two things. First, there may be an exposed wire (a ground in most cases) that is shorted or not attached correctly, or the pump itself...

Second opinion] The flywheel came off as i was driving due to a loose bolt and the flywheel flange at crankshaft was damaged i was wondering what other components of the vehicle could be damaged and if only resurfacing the flange or changing yeah crankshaft will be enough

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com