Jeep Wrangler JK Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(8)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(8)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Jeep Wrangler JK Control Arm Assembly Replacement is $245 with $77 for parts and $168 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Jeep Wrangler JKV6-3.6LService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$511.06Shop/Dealer Price$557.98 - $680.11
2018 Jeep Wrangler JKV6-3.6LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$490.34Shop/Dealer Price$533.19 - $652.28
2018 Jeep Wrangler JKV6-3.6LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$408.15Shop/Dealer Price$468.62 - $645.01
2018 Jeep Wrangler JKV6-3.6LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$376.79Shop/Dealer Price$429.42 - $582.29
2018 Jeep Wrangler JKV6-3.6LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$408.15Shop/Dealer Price$470.39 - $648.10
2018 Jeep Wrangler JKV6-3.6LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$395.05Shop/Dealer Price$452.41 - $619.10
2018 Jeep Wrangler JKV6-3.6LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$376.79Shop/Dealer Price$429.44 - $582.32
2018 Jeep Wrangler JKV6-3.6LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$395.05Shop/Dealer Price$452.24 - $618.81
Show example Jeep Wrangler JK Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0

Marco

12 years of experience
73 reviews
Marco
12 years of experience
Jeep Wrangler JK V6-3.6L - Brake Pads Replacement (Front, Rear) - Perris, California
Awesome job on both of my vehicles

Joseph

21 years of experience
718 reviews
Joseph
21 years of experience
Jeep Wrangler JK V6-3.6L - Wipers are not working - Salt Lake City, Utah
Very knowledgeable, super friendly.

Roberto

13 years of experience
354 reviews
Roberto
13 years of experience
Jeep Wrangler JK V6-3.6L - Car is not starting - Houston, Texas
Great

Brett

26 years of experience
220 reviews
Brett
26 years of experience
Jeep Wrangler JK V6-3.6L - Brake Pads Replacement (Rear) - Fort Mill, South Carolina
Brett was timely and professional. He was knowledgeable and showed me the parts that needed replacing. Great experience.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0
Number of Jeep Wrangler JK services completed
88+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Oil Pressure Sensor
Common signs include the Oil Pressure Light coming on or blinking constantly despite oil levels being fine or the oil pressure gauge reading zero.
P0090 OBD-II Trouble Code: Fuel Pressure Regulator 1 Control Circuit
P0090 code definition A P0090 diagnostic trouble code is referencing an issue with the fuel pressure regulator circuit. This code is similar...
The Guide to Legal Car Modifications in South Carolina
ARENA Creative / Shutterstock.com Those who live in South Carolina and those who are planning to do so need to understand the laws throughout the state. If you have a modified car or truck, the following laws...

2011 Lincoln MKZ has distinct pull/drift to left

I would first recommend having all of your tires on your 2011 Lincoln MKZ checked for incorrect tire conicity. Tire conicity is the ability of the tire to become cone shaped. If the tire tread becomes cone shaped this means...

Trans Idle Hot Engine Code on 2004 Cadillac SRX

Hi there. This is a warning light to tell you that your transmission is running to hot. This could be due to driving the car very hard or driving in very hot weather. The vehicle is asking you to stop...

Clunking noise from driver side wheel

If the new wheel bearing was not installed with the axle nut set to the factory torque specification, the noise could be from the wheel bearing. Other possible causes of noise at that location are brake interference and a faulty...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com