Jeep Wrangler JK Brake Caliper Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(8)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(8)

Brake Caliper Replacement Service

How much does a Brake Caliper Replacement cost?

On average, the cost for a Jeep Wrangler JK Brake Caliper Replacement is $341 with $89 for parts and $252 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Jeep Wrangler JKV6-3.6LService typeBrake Caliper - Passenger Side Front ReplacementEstimate$497.28Shop/Dealer Price$558.33 - $726.90
2018 Jeep Wrangler JKV6-3.6LService typeBrake Caliper - Passenger Side Rear ReplacementEstimate$443.52Shop/Dealer Price$492.01 - $630.04
2018 Jeep Wrangler JKV6-3.6LService typeBrake Caliper - Driver Side Rear ReplacementEstimate$440.84Shop/Dealer Price$488.70 - $624.76
2018 Jeep Wrangler JKV6-3.6LService typeBrake Caliper - Driver Side Front ReplacementEstimate$481.06Shop/Dealer Price$538.98 - $705.19
Show example Jeep Wrangler JK Brake Caliper Replacement prices

What is the Brake Caliper all about?

Most cars come with disc brakes in the front, and many models also have disc brakes in the rear. A caliper is part of the disc brake system. When you press the brake pedal, the brake fluid flows from the master cylinder to the calipers. Brake fluid then applies pressure on the piston inside the caliper, pushing the brake pads against the rotors to slow/stop your car. A car can have either 2 or 4 calipers. If the car has rotors on all four tires, then it will have four calipers. If the car has two rotors and two drums, then it will come with two calipers in front. The calipers can become contaminated, rusty, and start to leak brake fluid. Brake calipers absorb a lot of heat generated from the braking system. Over time, this heat can destroy or weaken the seals inside the calipers. Caliper servicing is usually done as part of a brake service job.

Keep in mind:

Work on brake calipers would likely include new brake pads because if the calipers have gone bad, it is very likely that the brake pads are worn out.

How it's done:

  • Remove and replace brake caliper and pads.
  • Inspect brake rotors.
  • Inspect brake line hoses.
  • Replace brake fluid.
  • Re-check brake system for fluid leaks.
  • Bleed the brake system.
  • Torque wheels to factory specifications.
  • Check brake system performance.

Our recommendation:

  • Keep up with the regular brake services as suggested by the manufacturer.
  • If you drive the car with thin brake pads or rotors, it will ruin the calipers.
  • Change the brake fluid on a regular basis (approx. every 30,000 miles).
  • If you notice a clear fluid on the tires or on your driveway and a change in the way the brake pedals feel (softer pedals), it is time to get the brake system inspected.

What common symptoms indicate you may need to replace the Brake Caliper?

  • Abnormal squealing noise from brakes.
  • When braking, the car will pull hard left or right.
  • Braking feels soft and spongy (brake pedals are easier to push than usual, going all the way to the floor when stepped on).
  • Brake fluid is leaking (clear fluid on the driveway or on the wheels).

How important is this service?

All services associated with proper function of your brakes are important. In addition to safety issues, ignoring small repairs can quickly lead to more serious (and more expensive) problems.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0

Roberto

13 years of experience
354 reviews
Roberto
13 years of experience
Jeep Wrangler JK V6-3.6L - Car is not starting - Houston, Texas
Great

Jesus

8 years of experience
33 reviews
Jesus
8 years of experience
Jeep Wrangler JK V6-3.6L - Oil Change - Coronado, California
ON Time, Professional, Clean , Service Oriented,

Elias

15 years of experience
225 reviews
Elias
15 years of experience
Jeep Wrangler JK V6-3.6L - Oil Change - Teterboro, New Jersey
Elias has worked on my car twice, always professional, shows up on time, and does great work.

Davin

29 years of experience
37 reviews
Davin
29 years of experience
Jeep Wrangler JK V6-3.6L - Car is not starting - Denver, Colorado
Quick knowledgeable and offered to help

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0
Number of Jeep Wrangler JK services completed
88+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Ford F-150
The The best-selling pickup truck in the US for over 30 years, the Ford F-150 has a lot to offer in reliability, durability, and the features that buyers want in a truck. The 2012 F-150 is not only a tough...
P0142 OBD-II Trouble Code: O2 Sensor Circuit Malfunction (Bank 1, Sensor 3)
Diagnostic Diagnostic Trouble Code (DTC): P0142 P0142 code definition O2 Sensor Circuit Malfunction (Bank 1, Sensor 3) What the P0142 code means P0142 is the OBD-II generic code indicating the Engine Control Module (ECM) input from the O2 sensor circuit...
How to Replace the Downshift Solenoid in Your Car
Downshift solenoids in your transmission give you a seamless experience when braking, and are important to make sure brakes always work properly.

Truck making loud gear noise when driving

This type of noise is typical of a bad hub bearing. When you turn left, you put more pressure on the right tire stressing the already bad bearing. This is why the noise seems to get louder. Bad hub bearings...

Transmission fluid coming up into water overflow

Hello. The transmission cooler tank may be leaking, causing water to get into the overflow. It is possible that the radiator you just replaced as a leak may need to be replaced again. If the transmission fluid is low, this...

Tries to run but won't get over 400 rpm before dying.

Hi there. Check for the three essentials that the engine needs to run, fuel, spark, and air. If you are having fuel and the pressure is 30 psi or higher, then check for spark on the spark plugs and wires....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com