Jeep Wrangler JK Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(7)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(7)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Jeep Wrangler JK Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Jeep Wrangler JKV6-3.6LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
Show example Jeep Wrangler JK Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0

Roberto

12 years of experience
307 reviews
Roberto
12 years of experience
Jeep Wrangler JK V6-3.6L - Car is not starting - Houston, Texas
Great

Davin

27 years of experience
23 reviews
Davin
27 years of experience
Jeep Wrangler JK V6-3.6L - Car is not starting - Denver, Colorado
Quick knowledgeable and offered to help

Elias

14 years of experience
115 reviews
Elias
14 years of experience
Jeep Wrangler JK V6-3.6L - Oil Change - Teterboro, New Jersey
Elias has worked on my car twice, always professional, shows up on time, and does great work.

Jesus

7 years of experience
33 reviews
Jesus
7 years of experience
Jeep Wrangler JK V6-3.6L - Oil Change - Coronado, California
ON Time, Professional, Clean , Service Oriented,

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0
Number of Jeep Wrangler JK services completed
77+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

Windshield Laws in Wisconsin
Driving Driving in Wisconsin means you have to follow the rules of the road. In addition to the traffic laws, however, motorists are also required to make sure that their vehicle equipment meets the standards set forth for safety. Below...
How to Strip Paint From Your Car
While While you may be able to apply a new coat of paint (https://www.yourmechanic.com/article/how-to-paint-a-car-yourself) to your car the way it is, stripping the old paint off first will yield better results. This task takes time and effort, and several options...
C1101 OBD-II Trouble Code: ABS Hydraulic Valve Circuit Failure
Trouble code C1101 means the engine control unit (ECU) has detected an unspecified failure in the ABS hydraulic valve circuit.

the horn honks when turning the key to start the truck?

Both the power to the ignition switch and the ground to the horn relay pass through the clockspring. The clockspring is a spiral-wound electrical connector which allows a vehicle's steering wheel to turn while still making an electrical connection between...

when i put my car in drive and start it , it will start but when its in park and i start it doesn't start why

Hi there. This is typically an indicator of a damaged safety switch underneath the shifter. However, it could also be caused by a wiring or electrical glitch in the ignition system or transmission shift solenoid. It would be best to...

I hanging funny sounds coming from rear drivers side wheel and service all wheel drive light keeps coming on ..GMC Acadia AWD 2014

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com