Jeep Wrangler JK Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(8)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(8)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Jeep Wrangler JK Car Thermostat Replacement is $317 with $121 for parts and $196 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Jeep Wrangler JKV6-3.6LService typeCar Thermostat ReplacementEstimate$458.96Shop/Dealer Price$524.49 - $709.74
Show example Jeep Wrangler JK Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0

Michael

19 years of experience
50 reviews
Michael
19 years of experience
Jeep Wrangler JK V6-3.6L - Radiator - Rockville, Maryland
Great experience, Michael was very professional and showed up early. He was also extremely knowledgeable and very accommodating.

Jesus

8 years of experience
33 reviews
Jesus
8 years of experience
Jeep Wrangler JK V6-3.6L - Oil Change - Coronado, California
ON Time, Professional, Clean , Service Oriented,

Marco

12 years of experience
73 reviews
Marco
12 years of experience
Jeep Wrangler JK V6-3.6L - Brake Pads Replacement (Front, Rear) - Perris, California
Awesome job on both of my vehicles

Joseph

21 years of experience
718 reviews
Joseph
21 years of experience
Jeep Wrangler JK V6-3.6L - Wipers are not working - Salt Lake City, Utah
Very knowledgeable, super friendly.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0
Number of Jeep Wrangler JK services completed
88+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Brake Master Cylinder
Common signs of a faulty brake master cylinder include abnormal brake pedal behavior, contaminated brake fluid, and the Check Engine Light turning on.
Symptoms of a Bad or Failing Throttle/Accelerator Pedal Position Sensor
Common signs of a faulty pedal position sensor include inconsistent engine response, reduced fuel efficiency, and the Check Engine Light coming on.
How Long Does a Shifter Interlock Solenoid Last?
Moving Moving the gear shift from park to drive or reverse lets you move the car when you’re ready, but what happens if you bump the shifter accidentally and aren’t ready to roll? In older cars, this was a very...

my car dont shift in high gears, but the transmission is good.

Hello. There are quite a few different parts that can cause this. It can be a transmission speed sensor, but a bad or defective throttle sensor can also cause this. If this started right after the throttle sensor was replaced,...

Coolant leak sprayed everywhere

Hello. More than likely, the hose clamps are loose or they are not in the right position. This would cause coolant to spray everywhere. It may also be necessary to replace the hose clamps you have now with new ones....

Small Backfires

It sounds like you may have a fuel supply problem in getting the proper amount of fuel to the fuel injectors. As you know, when you turn the key to on, the fuel pump (https://www.yourmechanic.com/services/fuel-pump-replacement) is activated and the fuel...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com