Jeep J10 Serpentine/Drive Belt Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(162)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(162)

Serpentine/Drive Belt Replacement Service

How much does a Serpentine/Drive Belt Replacement cost?

On average, the cost for a Jeep J10 Serpentine/Drive Belt Replacement is $118 with $23 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1985 Jeep J10L6-4.2LService typeSerpentine/Drive Belt ReplacementEstimate$165.29Shop/Dealer Price$187.87 - $233.09
1979 Jeep J10L6-4.2LService typeSerpentine/Drive Belt ReplacementEstimate$254.17Shop/Dealer Price$303.98 - $430.88
1979 Jeep J10V8-5.9LService typeSerpentine/Drive Belt ReplacementEstimate$253.31Shop/Dealer Price$302.91 - $429.16
1974 Jeep J10V8-6.6LService typeSerpentine/Drive Belt ReplacementEstimate$225.59Shop/Dealer Price$268.24 - $373.68
1978 Jeep J10V8-6.6LService typeSerpentine/Drive Belt ReplacementEstimate$225.59Shop/Dealer Price$268.27 - $373.75
1987 Jeep J10V8-5.9LService typeSerpentine/Drive Belt ReplacementEstimate$141.57Shop/Dealer Price$163.23 - $205.68
1986 Jeep J10L6-4.2LService typeSerpentine/Drive Belt ReplacementEstimate$150.29Shop/Dealer Price$172.75 - $217.88
1980 Jeep J10V8-5.9LService typeSerpentine/Drive Belt ReplacementEstimate$258.31Shop/Dealer Price$308.14 - $434.58
Show example Jeep J10 Serpentine/Drive Belt Replacement prices

What is a serpentine belt and how does it work?

A serpentine belt is a relatively long, flat, multi-ribbed belt that is driven by the engine’s crankshaft pulley. The belt drives many, and often all, of the engine accessories such as the alternator, air conditioning compressor, power steering pump, water pump, and air pump. The serpentine belt is tensioned by a hydraulic or spring-loaded automatic tensioner. Some older cars use a serpentine belt to drive most accessories but will also have a shorter v-style belt to drive, for example, the power steering pump.

Belts

When to consider replacing the serpentine belt:

  • Regularly scheduled maintenance. Typically, belt manufacturers recommend belt replacement at 90,000 miles. However, the belt must be inspected for wear or damage at regular intervals prior to this high mileage.
  • Squealing noise, belt slippage, visible belt damage. Should the belt fail or wear out prematurely, you may hear noise or you may see visible signs of deterioration such as missing chunks of rubber, excessive cracking, or a shredded appearance on the edge of the belt.
  • Battery Light. A loose belt, perhaps caused by a defective tensioner, may not drive the alternator at adequate speed and thus the battery may discharge, causing the warning light to illuminate.
  • Engine overheating. Often, the serpentine belt drives the water pump. In those applications, if the belt breaks the engine will overheat in seconds to minutes. If the belt is inadequately tensioned, you may notice higher-than-normal engine operating temperature.

How do mechanics replace the serpentine belt?

  • Prior to removing the belt, the mechanic must run the engine to determine if the idler pulley and the belt tensioner are noise-free. Those rotating components have grease filled bearings and are subject to wear. In addition, the mechanic will ensure that all pulleys and accessories are turning in the same plane. These steps help make sure your new belt will operate trouble-free for its full-service life.
  • The belt’s routing path through the various components is noted. The belt tensioner is released, usually with a wrench or lever, to release the tension from the belt. With the tension off, the belt slides off the pulleys.
  • All rotating components — that is the alternator, air conditioner compressor, etc. — are checked for smooth operation and no noise.
  • If everything checks out, the new belt is slipped over all of the pulleys while holding the tensioner away from the belt. Once the belt is centered on all pulleys, the tensioner is released and the installation is complete. The engine is run to ensure normal operation.

Is it safe to drive with a serpentine belt problem?

No. Should the belt have visible damage, you risk unexpected and sudden breakage that could potentially leave you stranded. Serpentine belt problems that result in the alternator not charging may cause the battery to discharge, which will result in loss of electrical power to the vehicle. Additionally, if a deteriorated belt breaks and that belt drives the water pump, the engine will overheat in a matter of seconds.

When replacing the serpentine belt keep in mind:

  • On many cars, the expected service life of a serpentine belt is around 90,000 miles. Should the belt fail well prior to that, a very careful inspection should be performed to check for out-of-alignment pulleys, a possibly out-of-position crankshaft harmonic balancer on which the drive pulley is mounted, binding pulleys, or a defective belt tensioner.
  • Attention should always be given to serpentine belt routing, since proper routing is critical to proper belt tension, and function of the driven components.
  • Sometimes it is difficult to distinguish serpentine belt related noise from other engine noises. In these cases, a mechanic will determine the origin of the noise by momentarily running the engine without the serpentine belt attached.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(162)

Rating Summary
156
3
0
1
2
156
3
0
1
2

Allen

36 years of experience
471 reviews
Allen
36 years of experience
Jeep J10 V8-5.9L - Car is not starting - New Smyrna Beach, Florida
Great guy to deal with. Older truck that hadn’t run in 7 years, Allen had it running quickly!

Robert

48 years of experience
51 reviews
Robert
48 years of experience
Jeep Grand Cherokee V8-5.7L - Serpentine/Drive Belt - Austin, Texas
Robert did a great job. Was very pleasant and took pride in his work.

Peter

43 years of experience
1321 reviews
Peter
43 years of experience
Jeep Liberty V6-3.7L - Serpentine/Drive Belt - Glendale, Arizona
Honestly

Jesus

6 years of experience
23 reviews
Jesus
6 years of experience
Jeep Grand Cherokee L6-4.0L - Serpentine/Drive Belt - Seal Beach, California
Very professional and thorough with work. Showed up on time and got straight to it. Would definitely recommend to anyone needing a mechanic.

Excellent Rating

(162)

Rating Summary
156
3
0
1
2
156
3
0
1
2
Number of Jeep Serpentine/Drive Belt Replacement services completed
1782+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

How Long Does a Horn Last?
For For most car owners, staying safe while on the roadways is a top priority. While the roadways can be a dangerous place, there are a variety of things on your car that are there to offer a higher degree...
P0156 OBD-II Trouble Code: 02 Sensor Circuit Malfunction (Bank 2 Sensor 2)
P0156 P0156 trouble code definition Oxygen Sensor Circuit Malfunction (Bank 2 Sensor 2) What the P0156 code means The purpose of the oxygen sensor is to monitor the amount of oxygen present in the exhaust and relay this information to...
P0919 OBD-II Trouble Code: Gearshift Position Control Error
P0919 means there is a malfunction in the gearshift's ability to manipulate the shift position due to faulty gearbox components, or wiring issues.

What type of gasoline should I use?

Your car runs on gasoline. This is what’s burned to provide power for turning the wheels. However, not all gas types are created equal. Your engine is rated to use gas with an octane rating of 87 or higher (87-octane...

Car overheating

You might have an air pocket in the cooling system. Air pockets are common on some vehicles and can be a headache. When the cooling system is opened and coolant drained, air from the atmosphere gets in the engine. Once...

There a knocking noise in motor

Without more information, if will not be possible to determine the cause of your concern. There are many moving parts in an engine and any one of them can cause noise. It could be a bearing going bad, piston slap,...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com