Jeep J-210 Serpentine/Drive Belt Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(162)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(162)

Serpentine/Drive Belt Replacement Service

How much does a Serpentine/Drive Belt Replacement cost?

On average, the cost for a Jeep J-210 Serpentine/Drive Belt Replacement is $160 with $65 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1964 Jeep J-210L6-3.8LService typeSerpentine/Drive Belt ReplacementEstimate$245.59Shop/Dealer Price$288.24 - $393.69
1963 Jeep J-210L6-3.8LService typeSerpentine/Drive Belt ReplacementEstimate$225.59Shop/Dealer Price$268.26 - $373.72
1965 Jeep J-210V8-5.3LService typeSerpentine/Drive Belt ReplacementEstimate$225.59Shop/Dealer Price$268.26 - $373.72
1965 Jeep J-210L6-3.8LService typeSerpentine/Drive Belt ReplacementEstimate$225.59Shop/Dealer Price$268.24 - $373.68
Show example Jeep J-210 Serpentine/Drive Belt Replacement prices

What is a serpentine belt and how does it work?

A serpentine belt is a relatively long, flat, multi-ribbed belt that is driven by the engine’s crankshaft pulley. The belt drives many, and often all, of the engine accessories such as the alternator, air conditioning compressor, power steering pump, water pump, and air pump. The serpentine belt is tensioned by a hydraulic or spring-loaded automatic tensioner. Some older cars use a serpentine belt to drive most accessories but will also have a shorter v-style belt to drive, for example, the power steering pump.

Belts

When to consider replacing the serpentine belt:

  • Regularly scheduled maintenance. Typically, belt manufacturers recommend belt replacement at 90,000 miles. However, the belt must be inspected for wear or damage at regular intervals prior to this high mileage.
  • Squealing noise, belt slippage, visible belt damage. Should the belt fail or wear out prematurely, you may hear noise or you may see visible signs of deterioration such as missing chunks of rubber, excessive cracking, or a shredded appearance on the edge of the belt.
  • Battery Light. A loose belt, perhaps caused by a defective tensioner, may not drive the alternator at adequate speed and thus the battery may discharge, causing the warning light to illuminate.
  • Engine overheating. Often, the serpentine belt drives the water pump. In those applications, if the belt breaks the engine will overheat in seconds to minutes. If the belt is inadequately tensioned, you may notice higher-than-normal engine operating temperature.

How do mechanics replace the serpentine belt?

  • Prior to removing the belt, the mechanic must run the engine to determine if the idler pulley and the belt tensioner are noise-free. Those rotating components have grease filled bearings and are subject to wear. In addition, the mechanic will ensure that all pulleys and accessories are turning in the same plane. These steps help make sure your new belt will operate trouble-free for its full-service life.
  • The belt’s routing path through the various components is noted. The belt tensioner is released, usually with a wrench or lever, to release the tension from the belt. With the tension off, the belt slides off the pulleys.
  • All rotating components — that is the alternator, air conditioner compressor, etc. — are checked for smooth operation and no noise.
  • If everything checks out, the new belt is slipped over all of the pulleys while holding the tensioner away from the belt. Once the belt is centered on all pulleys, the tensioner is released and the installation is complete. The engine is run to ensure normal operation.

Is it safe to drive with a serpentine belt problem?

No. Should the belt have visible damage, you risk unexpected and sudden breakage that could potentially leave you stranded. Serpentine belt problems that result in the alternator not charging may cause the battery to discharge, which will result in loss of electrical power to the vehicle. Additionally, if a deteriorated belt breaks and that belt drives the water pump, the engine will overheat in a matter of seconds.

When replacing the serpentine belt keep in mind:

  • On many cars, the expected service life of a serpentine belt is around 90,000 miles. Should the belt fail well prior to that, a very careful inspection should be performed to check for out-of-alignment pulleys, a possibly out-of-position crankshaft harmonic balancer on which the drive pulley is mounted, binding pulleys, or a defective belt tensioner.
  • Attention should always be given to serpentine belt routing, since proper routing is critical to proper belt tension, and function of the driven components.
  • Sometimes it is difficult to distinguish serpentine belt related noise from other engine noises. In these cases, a mechanic will determine the origin of the noise by momentarily running the engine without the serpentine belt attached.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(162)

Rating Summary
156
3
0
1
2
156
3
0
1
2

Manuel

9 years of experience
56 reviews
Manuel
9 years of experience
Jeep Cherokee L6-4.0L - Serpentine/Drive Belt - Winston Salem, North Carolina
Manuel is knowledgeable and kind. He helped me understand next steps

Ruben

14 years of experience
5 reviews
Ruben
14 years of experience
Jeep Wrangler V6-3.6L - Serpentine/Drive Belt - Chicago, Illinois
Ruben showed up early and worked quick. He was very professional in his communication before, during, and after. He was also sure to make sure I knew about anything that he could tell my car would need soon. I appreciated his hard work!

Joshua

13 years of experience
41 reviews
Joshua
13 years of experience
Jeep Liberty V6-3.7L - Serpentine/Drive Belt - Durham, North Carolina
He was courteous and on time. He even caught another problem that was in the works (faulty water pump) and set up a follow up repair time for that problem. Overall, he did a good job and we're happy with his services!

Curtis

29 years of experience
163 reviews
Curtis
29 years of experience
Jeep Grand Cherokee L6-4.0L - Serpentine/Drive Belt - Evans, Georgia
Very helpful!

Excellent Rating

(162)

Rating Summary
156
3
0
1
2
156
3
0
1
2
Number of Jeep Serpentine/Drive Belt Replacement services completed
1782+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

How Far Can You Drive On a Flat Tire?
You’re driving down the interstate and your tire pressure monitor light comes on. You notice the tire pressure slowly dropping....
What are the Car Pool Rules in Vermont?
Car Car pool lanes have been around for a few centuries, and have been rapidly growing in popularity. There are currently over 3,000 miles of car pool lanes in the United States, covering any different states. Millions of Americans rely...
P3413 OBD-II Trouble Code: Cylinder 2 Exhaust Valve Control Circuit/Open
Trouble code P3413 is a generic OBD-II powertrain code, often caused by a short to the power, disconnected wires, or a faulty engine control module.

How long should tires last?

Tires are expensive, and you want them to last as long as possible. However, there are lots of different factors that go into determining tire life, most of which are out of the hands of the manufacturer. Here are some...

New Slave cylinder installed and the plunger keeps getting dislocated. Doesn't want to go back into the cylinder and the pedal is soft

Hey there, it sounds as though the hydraulic pressure is not bleeding back fully when you release the pedal. First you should check the clutch pedal and verify that there is free play when the pedal is released. There should...

My engine turns over but will not stay kn unless I am pressing on the gas pedal. It ran fine this morning but stalled at a stop sign on my way to work and now just completely will not stay

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com