Jeep J-210 Lights (Headlamps/beams/brakes) Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(11)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(11)

Lights (Headlamps/beams/brakes) Inspection Service

How much does a Lights (Headlamps/beams/brakes) Inspection cost?

On average, the cost for a Jeep J-210 Lights (Headlamps/beams/brakes) Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1965 Jeep J-210V8-5.3LService typeLights (Headlamps/beams/brakes) InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1963 Jeep J-210L6-3.8LService typeLights (Headlamps/beams/brakes) InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1964 Jeep J-210L6-3.8LService typeLights (Headlamps/beams/brakes) InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1965 Jeep J-210L6-3.8LService typeLights (Headlamps/beams/brakes) InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
Show example Jeep J-210 Lights (Headlamps/beams/brakes) Inspection prices

The headlights and brake lights on a vehicle are absolutely essential for safe driving and in many cases it is illegal to drive if they are not functioning correctly. Problems with the light system can range from a simple blown bulb to something more complicated like a faulty socket.

Regardless of the reason, lights that are not functioning can lead to dangerous driving conditions, so the lighting system should be inspected and repaired as soon as possible.

How this system works:

Headlights

There are a number of different types of headlight systems but they all do the same thing: light up the road in front of the vehicle.

In a common halogen system, the headlight housing is where the headlight bulb sits. The inside of the housing is covered with chrome paint that reflects the light down the road. The chrome piece that coves the actual bulb is there to prevent the bulb from blinding oncoming drivers. They are powered by the vehicles electrical system. They can be toggled between a high and low beam. These systems use a halogen bulb.

Brake Lights

Brake lights illuminate when the contacts in the stop light switched are closed. When a driver steps on the brake pedal, this closes the switch, which sends power to the bulbs, which lights up the bulbs.

Common reasons for this to happen:

Brake Lights

  • Blown Fuse: The electrical power for the brake light system passes through a fuse and if the fuse blows, the brake lights will no longer work. While this is usually a simple fix, it could indicate a larger problem. If the same fuses continue to blow, the brake light system should be inspected.

  • Burned Out Bulb: Like any light bulb, vehicle bulbs will burn out over time. At some point in the lifespan of a vehicle the brake light bulbs will have to be replaced. Time frames differ depending on the bulb type. In most states driving with a burned out brake light is illegal.

  • Malfunctioning Brake Light Switch: The brake light switch works like a household light switch. When the brake pedal is depressed it opens the switch to send electricity to the brake lights. If the switch is bad it breaks the connection between the brake lights and the pedal. The brake lights will no longer work, or they can become stuck in the on position.

  • Issue with Bulb Socket: The sockets that the brake light bulbs sit in can be dirty. If the debris builds up on the contacts in the socket it will prevent the bulb from making contacting and it will not light up. In this situation, only one brake light will not be working, it is uncommon for both sockets to become blocked at the same time.

Unplugged Harness: The electrical system that runs the brake light system contains various harness and if one of them becomes unplugged or defective it will affect the brake lights.

Headlights

  • Bad Bulb: Just like the brake lights and every other bulb, eventually the headlights will burn out and need to be replaced. Bulb life varies depending on what type of bulb the vehicle uses. In most cases, if only one headlight is not working, replacing the bulb should be the first step.

  • Blown Fuse: Just like the brake lights, the electrical system that runs the headlights incorporates fuses and if one of them is blown the headlights will not work. If you cannot switch between high and low beams, a fuse could very well be the problem.

  • Bad Relay: If both headlights are not working, the headlight relay is one of the most common causes. The headlight relay is part of the electrical system and if it is malfunctioning, the lights will not get power. The relay will have to be replaced.

  • Bad Headlight Switch: The headlight switch is used to turn on the lights. If the switch is malfunctioning the headlights will not function. If it is impossible to turn the headlights on the car should not be driven at night and should be repaired immediately.

  • Faulty Socket: The socket that the headlight bulb sits in can become dirty or contaminated. If this happens the bulb cannot make the contact it needs to light. In this case, the most common symptom would be one headlight not working.

  • Moisture in Headlight: If the headlights turn on but are not illuminating the road there could be moisture in the in the housing. This will cause fogging and diminished performance of the headlights.

  • Bad Dimmer Switch: The dimmer switch allows the driver to switch between high and low beams. If the switch is malfunctioning the headlights can become stuck on high or low. Headlights stuck on high could be dangerous for on-coming drivers and the problem should be fixed as soon as possible.

What to expect:

A top­-rated mobile mechanic will come to your home or office to determine the source and cause of the headlight or brake light issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

The lights are a major safety component of the vehicle and they should be maintained to ensure safe driving conditions. Malfunctioning lights should be inspected and repaired as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(11)

Rating Summary
11
0
0
0
0
11
0
0
0
0

Robert

42 years of experience
232 reviews
Robert
42 years of experience
Jeep Grand Cherokee L6-4.0L - Lights (Headlamps/beams/brakes) - Houston, Texas
He was Great, fix my brake light,check the over all of my truck. .

Collins

12 years of experience
512 reviews
Collins
12 years of experience
Jeep Grand Cherokee V6-3.6L - Lights (Headlamps/beams/brakes) - Atlanta, Georgia
On time. Professional. Gave options for the repair. Answered all questions thoroughly.

Angelo

32 years of experience
76 reviews
Angelo
32 years of experience
Jeep Wrangler L6-4.0L - Lights (Headlamps/beams/brakes) - Coppell, Texas
Angelo was great!! Very professional and knowledgeable! Knew exactly what the problem was and fixed it! We will definitely use him again

Nate

21 years of experience
90 reviews
Nate
21 years of experience
Jeep Wrangler V6-3.6L - Lights (Headlamps/beams/brakes) - Smyrna, Georgia
Nate was very helpful and professional. Thank you!

Excellent Rating

(11)

Rating Summary
11
0
0
0
0
11
0
0
0
0
Number of Jeep Lights (Headlamps/beams/brakes) Inspection services completed
121+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

How Long Does an Exhaust Clamp Last?
When When examining your vehicle's exhaust system, it's normal to find that each of the pipes involved have been welded together. However, sometimes you may find that an exhaust clamp has been used, which is even more common when an...
How to Choose the Right Muffler for Your Car
Your Your muffler is a very important part of your vehicle. Mufflers (https://www.yourmechanic.com/article/how-does-a-muffler-work) can have a strong impact on three different aspects of your car: how loud it is, how fuel efficient it is, and how much power it generates....
How to Get Smog Technician Certified in Delaware
Automotive technician jobs include smog certified emissions inspectors. In Delaware, you need to become a Certified Emission Repair Technician.

How do I use the ParkView rear back up camera?

The ParkView rear back up camera gives you extra vision when backing up. The camera is located on the rear of the vehicle, to the left of the trailer hitch. When you put your car in REVERSE, the ParkView system...

Loss of oil pressure

The oil sender may be bad causing the erratic readings. I would, however, suggest having the oil pressure tested with a gauge before replacing the sending unit for the oil pressure. If it tests okay and the pressures are normal,...

Do I need to repair or replace my ECM?

You can get an ECM-related code for a number of different reasons. It can be something as simple as a voltage loss from a bad battery connection, or it may need a new ECM. I usually check the codes and...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com