Jeep Comanche Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(9)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(9)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Jeep Comanche Control Arm Assembly Replacement is $195 with $55 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Jeep ComancheL6-4.0LService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$420.80Shop/Dealer Price$455.70 - $544.20
1991 Jeep ComancheL6-4.0LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$481.26Shop/Dealer Price$532.25 - $676.96
1990 Jeep ComancheL6-4.0LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$481.26Shop/Dealer Price$532.30 - $677.05
1990 Jeep ComancheL6-4.0LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$393.67Shop/Dealer Price$443.59 - $587.50
1990 Jeep ComancheL4-2.5LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$328.19Shop/Dealer Price$377.07 - $516.22
1990 Jeep ComancheL4-2.5LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$315.19Shop/Dealer Price$345.68 - $430.88
1990 Jeep ComancheL4-2.5LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$328.19Shop/Dealer Price$375.61 - $513.67
1990 Jeep ComancheL4-2.5LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$393.67Shop/Dealer Price$443.59 - $587.50
Show example Jeep Comanche Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(9)

Rating Summary
8
0
0
0
1
8
0
0
0
1

Luis

13 years of experience
78 reviews
Luis
13 years of experience
Jeep Comanche L6-4.0L - Not able to change gears - Albuquerque, New Mexico
Luis showed up right on time and gave a clear, concise diagnosis.

Cesar

10 years of experience
292 reviews
Cesar
10 years of experience
Jeep Comanche L6-4.0L - Car is not starting - Marysville, Washington
the best experience got me up an running in no time!

Cesar

10 years of experience
292 reviews
Cesar
10 years of experience
Jeep Comanche L6-4.0L - Alternator - Marysville, Washington
Cesar is an excellent mechanic! Replaced both my alternator and starter in about an hour.

Horus

12 years of experience
122 reviews
Horus
12 years of experience
Jeep Comanche L6-4.0L - Serpentine/Drive Belt - San Antonio, Texas
knows his stuff.

Excellent Rating

(9)

Rating Summary
8
0
0
0
1
8
0
0
0
1
Number of Jeep Comanche services completed
99+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

How to Replace an Air Diverter Valve
Car air diverter valves add clean air from the air pump to the emissions system to push out pollutants. Air valves are critical for car performance.
How Are Car Wires Protected From Damage?
The highest tech cars can contain miles of electrical wiring. Wires must be secured and protected from heat and debris in order to work properly.
How Long Does a Power Brake Booster Last?
When When you press the brake pedal, your car slows down and eventually stops. Most of us put little more thought into it. We know that our brake pads need to be replaced periodically, and we’ll probably need to have...

rpm

The tach needle was put back on wrong when you installed it. The tach needle shaft must have moved once you pulled the needle off. The shaft can be moved very easily by just tapping on the gauge. What you...

While driving, car will stall

You will need to have the charging system and battery system checked to see if the alternator is putting out enough volts and amperage to recharge the batteries. The alternator is the most common failure to correct the problem for...

My vehicle was running great. After I had the oil changed it was cutting out and had to replace my vvt solenoids. Now overheating?

A oil change cannot cause any of the problems you are having unless the incorrect viscosity too thick of oil was put in. Your engine calls for 5w20 motor oil and synthetic oil is recommended. If too thick oil is...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com