Jaguar XFR-S Throttle Body Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(1,016)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(1,016)

Throttle Body Replacement Service

How much does a Throttle Body Replacement cost?

On average, the cost for a Jaguar XFR-S Throttle Body Replacement is $750 with $498 for parts and $252 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2014 Jaguar XFR-SV8-5.0L TurboService typeThrottle Body ReplacementEstimate$1274.88Shop/Dealer Price$1540.05 - $2299.11
2013 Jaguar XFR-SV8-5.0L TurboService typeThrottle Body ReplacementEstimate$1258.66Shop/Dealer Price$1515.88 - $2268.98
2015 Jaguar XFR-SV8-5.0L TurboService typeThrottle Body ReplacementEstimate$1258.66Shop/Dealer Price$1516.00 - $2269.18
Show example Jaguar XFR-S Throttle Body Replacement prices

What is the throttle body and how does it work?

The throttle body is an air metering device mounted between the air filter and snorkel, and the intake plenum. Within the throttle body is a movable throttle plate whose position controls the amount of air that enters the engine to determine engine speed. Throttle body designs vary. Some incorporate an idle air control valve, throttle position sensor, and other electronic throttle controls. The throttle plate in the throttle body can be controlled directly by an accelerator pedal cable or fully electronically in the newest drive-by-wire systems.

When to consider replacing the throttle body:

  • Check engine light and/or reduced power warning light is on. Most modern throttle bodies have electrical components, such as a throttle position sensor. These components are monitored by the powertrain control module (PCM). If the check engine light or reduced power warning light comes on, a mechanic will determine if any of the stored trouble codes implicate a throttle body malfunction.
  • Wrong idle speed. Carbon deposits in the throttle body, particularly around the movable throttle plate or in the idle air control valve, can cause the engine idle speed to be too low or too high.
  • Poor transmission shifting. In some applications, transmission shift timing relies on signal outputs from the throttle body. If the throttle position sensor is defective, that might adversely affect shift timing and feel.

How do mechanics replace the throttle body?

  • The engine cover is removed, if necessary.
  • The flexible rubber snorkel from the air filter housing to the throttle body is disconnected. Typically, the connection is made with a large stainless steel hose clamp.
  • The electrical connections to the throttle body are removed.
  • If the throttle body is not a drive-by-wire system, the accelerator cable and cruise control cable are disconnected and set aside.
  • The bolts retaining the throttle body to the plenum, the gasket, and the throttle body are removed. If the throttle body is being cleaned and tested for re-use, approved chemicals are used in the cleaning process.
  • The new or serviced throttle body is re-attached to the plenum and the bolts torqued to factory specifications.
  • All cables and electrical connections are restored. The intake air snorkel is reconnected.
  • If applicable, the electronic throttle installation and idle re-learn procedures are performed using an appropriate scan tool.
  • Finally, the engine is started, brought to normal operating temperature, and idle speed is checked. The car is road tested to ensure normal operation and no illumination of warning or service lights.

Is it safe to drive with a throttle body problem?

Yes. But, the vehicle may be limited in power or put into what is referred to as limp mode, in order to get the vehicle to a repair facility. If the check engine light is on, or the electronic throttle control warning light is on, but there is no noticeable difference in engine performance, the car can be safely driven. However, it is best to have it diagnosed and repaired at your earliest convenience to avoid unexpected breakdown or possible damage to the catalytic converter.

When replacing the throttle body keep in mind:

  • Many modern throttle bodies have spring loaded sensors and plastic gears that are not intended to be manipulated directly during any diagnostics or inspections. These components are controlled electronically or generate signals. It is best to let a mechanic use approved tests to diagnose the problem.
  • Wiring faults, bad grounds, or bad terminal connections can make it appear as though an electronically controlled throttle has failed. A mechanic will always rule out all other causes before replacing the throttle body.
  • When cleaning the throttle body, special care should be taken to use only special spray cleaners designed to not damage electrical components or sensors.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jaguar mechanics

Real customer reviews from Jaguar owners like you.

Excellent Rating

(1,016)

Rating Summary
940
36
10
5
25
940
36
10
5
25

Levi

10 years of experience
64 reviews
Levi
10 years of experience
Jaguar XFR-S V8-5.0L Turbo - Oil Change - Oklahoma City, Oklahoma
Levi is top of the line. I know a good mechanic is hard to find, especially on foreign cars. I do believe I have finally found my answer to getting to avoid the snooty Jag dealership. Thank you Your Mechanic for being so helpful, easy to work with, having the best price and the most info This made our decision making process quick and east

Martin

24 years of experience
68 reviews
Martin
24 years of experience
Jaguar XK V8-4.2L - Throttle Body - Houston, Texas
Martin is a outstanding mechanic and has impeccable knowledge about the vehicles he works on. He went up and beyond to assist me with the repairs of my vehicle and offered advice/guidance on further repairs. Martin will be my go to for any future repairs with YourMechanic and highly recommend him!

Chris

23 years of experience
2372 reviews
Chris
23 years of experience
Jaguar XF V8-4.2L Turbo - Brake Rotor/Disc Replacement (Front) - Fallbrook, California
Fantastic service!

RYAN

6 years of experience
103 reviews
RYAN
6 years of experience
Jaguar XK V8-4.2L - Headlight Bulb Replacement (Passenger Side High Beam) - San Antonio, Texas
Once again, Ryan was on time and quickly dealt with the headlight bulb replacement on my Jaguar. Gave me valuable tips.

Excellent Rating

(1,016)

Rating Summary
940
36
10
5
25
940
36
10
5
25
Number of Jaguar services completed
11176+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jaguar MECHANICS
500+
experts on our platform

Recent articles & questions

P2098 OBD-II Trouble Code: Post Catalyst Fuel Trim System Too Lean Bank 2
What the P2098 code means? P2098 is an OBD-II generic code for the engine control module (ECM) detecting the post catalyst O2...
Symptoms of a Bad or Failing Ride Control Module
Common signs include the Air Ride Suspension Light coming on, a bumpy ride, and uneven ride height.
How to Transfer a Car Title in Oklahoma
In In Oklahoma, ownership of a car, truck or motorcycle is shown with a title. The current owner’s name must be on the title. However, when that vehicle is sold, gifted or changes ownership in some other way, the title...

P1810 Pressure Manifold Fault

If you have code P1810, then this might be something wrong with the transmission control valve for the gear position sensor, or a compatibility problem between the different computers. Have a pinpoint test for the code (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) done and see...

My front brake calipers are sticking and not releasing

Lift up the front wheels to where they are off the ground. Remove the wheels and tires from the vehicle on the front. Remove the slider bolts one at a time and clean them. Apply Never Seize to the sliding...

Someone poured corn syrup in my son's Jeep Sahara 2013. How long does it take to run through to the fuel pump? Police are looking

Hi there. Sorry to hear this has happened to you. Generally speaking, when sugar or syrup is poured into a fuel tank, the best way to reduce damage to internal engine components is to remove the fuel tank and fuel...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com