Isuzu i-370 Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(329)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(329)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Isuzu i-370 Power Steering Pump Replacement is $374 with $164 for parts and $210 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2008 Isuzu i-370L5-3.7LService typePower Steering Pump ReplacementEstimate$560.92Shop/Dealer Price$648.43 - $898.79
2007 Isuzu i-370L5-3.7LService typePower Steering Pump ReplacementEstimate$547.41Shop/Dealer Price$632.26 - $880.64
Show example Isuzu i-370 Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Isuzu mechanics

Real customer reviews from Isuzu owners like you.

Excellent Rating

(329)

Rating Summary
305
14
0
2
8
305
14
0
2
8

Miguel

36 years of experience
258 reviews
Miguel
36 years of experience
Isuzu Amigo L4-2.6L - Car is not starting - Jacksonville, Florida
Amazing and efficient mechanic. He also does not mind that you watch the quality of work that he completes. I would highly recommend!

Ben

19 years of experience
114 reviews
Ben
19 years of experience
Isuzu Rodeo V6-3.2L - Power steering fluid is leaking - Denver, Colorado
Great work, always on time. Friendly and knowledgeable! Once again, impressive!! Highly recommended!

Jeffrey

28 years of experience
870 reviews
Jeffrey
28 years of experience
Isuzu Amigo L4-2.2L - Car is not starting - Catawba, South Carolina
Jeffrey did a great job for us!

Dan

40 years of experience
1080 reviews
Dan
40 years of experience
Isuzu Rodeo V6-3.2L - Oil Change - Flowery Branch, Georgia
This was the perfect option for us. My husband and I are always on the go and finally had a day off to take it easy. We needed the oil changed though but of course did not feel like taking it somewhere and waiting for hours when we had so much to do at home! Having this service come to us was great!! I highly recommend your mechanic.

Excellent Rating

(329)

Rating Summary
305
14
0
2
8
305
14
0
2
8
Number of Isuzu services completed
3619+
services done by our mechanics
TOTAL NUMBER OF EXPERT Isuzu MECHANICS
200+
experts on our platform

Recent articles & questions

What Does the Oil Pressure Warning Light Mean?
The oil pressure light warns you when the oil pressure in your car is getting low, due to either a pump malfunction or low oil level in the engine.
How to Buy a Good Quality Reverse Light Bulb
Reverse Reverse lights are a specific category of tail light that only lights up when you are in reverse or when you step on the brakes. Tail lights are one of the most important safety components that you vehicle has,...
5 Essential Things to Know Before Buying a Truck
Trucks Trucks are a popular option thanks to their overall versatility. They can haul people and things with ease, and they handle off-road adventures like champs. However, there are five essential things to know before buying a truck. Passengers The...

So I just changed my oil in a 2011 dodge charger for the 3rd time the oil pressure is going from 30 to about 80 is this normal

Hi Cassandra. As long as you've used the recommended oil viscosity and correct filter, you should be OK with the range you are describing. It's typical for oil pressure to range anywhere from 25 on the low end to 40...

2010 impala Car shakes when I'm on a stop sign or red light on drive or reverse but not on park or neutral what's the problem?

Hi Alejandro. Thanks for contacting us today. Sometimes when you experience this type of vibration as you've described, it's caused by a damaged input shaft or other components inside the differential. This could also be a loose or damaged engine/transmission...

I just got new tires for my 1995 GMC Sonoma. They rub slightly on the frame when the wheel is locked in a turn. I am going to get spacers, but want to make sure that I get the correct size. The specs on the spacers are: Wheel Bolt Pattern: 5x4.75 Hub Bore: 70.5mm Thread Pitch: 12x1.5 Will these fit as needed?

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com