Isuzu i-350 Transfer case fluid is dirty Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(313)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(313)

Transfer case fluid is dirty Inspection Service

How much does a Transfer case fluid is dirty Inspection cost?

On average, the cost for a Isuzu i-350 Transfer case fluid is dirty Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Isuzu i-350L5-3.5LService typeTransfer case fluid is dirty InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
Show example Isuzu i-350 Transfer case fluid is dirty Inspection prices

A transfer case is unique to all-wheel drive and four-wheel drive vehicles, sending power from the engine to the rear wheels. The transfer case is a sealed unit and may be either gear-driven or chain-driven depending on the manufacturer. Because the transfer case is a sealed unit, it requires lubrication to keep all of the moving parts clean and at a reasonable temperature. Transfer case fluid ensures the longevity of parts in the transfer case.

How this system works:

In four-wheel drive and all-wheel drive vehicles, a transfer case is either connected directly to the back of the transmission, or by a small driveshaft further back in the vehicle. When activated, the transfer case takes power from the engine to the back wheels. Depending on the kind of vehicle, power may go to the rear wheels on a full-time or part-time basis. All-wheel drive systems are typically on all of the time while a four-wheel drive system are activated by either pressing a button in the vehicle or by manipulating a selector lever, typically located near the transmission hump on the floor. In both systems, transfer case fluid keeps the internal parts of the transfer case lubricated. Over time, transfer case fluid will become dirty and break down. When transfer case fluid breaks down you may notice shuddering from the vehicle while turning or a whining noise from the gears in the transfer case.

Common reasons for this to happen:

  • Time: Over time, transfer case fluid will break down and become dirty. Dirty transfer case fluid may cause moving parts in the transfer case to have more difficulty moving, which may cause them to fail.

  • Improper Filling: If the transfer case is not properly filled with transfer case fluid, it may break down more quickly, have difficulty dissipating heat, and keeping parts lubricated.

What to expect:

A top-rated mobile mechanic will come to your home or office and determine whether or not your transfer case fluid needs to be replaced. If it does, he or she will then provide a detailed inspection report outlining the reason the fluid needed to be replaced and the cost of any repairs that may need to be made.

How it's done:

A mechanic will first have your vehicle idle for a few minutes to warm the fluid as warm fluid will drain easier. The mechanic will then drain the old transfer case fluid through the drain plug. The drain plug on most transfer cases is magnetic and picks up metal shavings that otherwise might potentially damage components in the transfer case. The mechanic should clean the drain plug before replacing it. The mechanic will then remove the fill plug and add new fluid. The mechanic should also double-check the amount of fluid, he or she puts in the transfer case, ensuring that it was done properly. A vehicle that is under-lubricated may not dissipate heat or protect critical components as well as a vehicle that is properly lubricated. When the transfer case is full, the mechanic will replace the fill plug and check for any leaks.

How important is this service?

By choosing to not replace your transfer case fluid, you may compromise critical and expensive components inside the transfer case. Because the transfer case is a sealed unit, it is very important that the transfer fluid is filled properly so that heat is appropriately dissipated and components to not suffer from unneeded friction. Repairing a differential can be very expensive, so in order to preserve these components, you should have you transfer case fluid replaced at the correct intervals. Doing so could potentially save you a lot of money down the road.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Isuzu mechanics

Real customer reviews from Isuzu owners like you.

Excellent Rating

(313)

Rating Summary
290
13
0
2
8
290
13
0
2
8

MICHAEL

33 years of experience
184 reviews
MICHAEL
33 years of experience
Isuzu Ascender L6-4.2L - Oil Change - Philadelphia, Pennsylvania
Fast, friendly and informative

David

37 years of experience
39 reviews
David
37 years of experience
Isuzu Pickup L4-2.3L - Whining sound when car is in gear - Manor, Texas
It was cool. Diagnosed problem right away

Dustin

8 years of experience
65 reviews
Dustin
8 years of experience
Isuzu Rodeo V6-3.2L - Oil/Fluid Leak - Conroe, Texas
He was very nice, explained everything to me, big thumbs up

David

16 years of experience
637 reviews
David
16 years of experience
Isuzu Rodeo V6-3.2L - Loud screeching noise when I start the car - Sacramento, California
Mr. David Oloyede is very professional, fast, organize & excellent in customer care! I am a very satisfied customer! I thank you for sending him to check my SUV. Sincerely, Cynthia Queyquep

Excellent Rating

(313)

Rating Summary
290
13
0
2
8
290
13
0
2
8
Number of Isuzu services completed
3443+
services done by our mechanics
TOTAL NUMBER OF EXPERT Isuzu MECHANICS
200+
experts on our platform

Recent articles & questions

What Is Engine Braking?
Drivers can use engine braking to slow the speed of their engine and vehicle. Engine decompression helps your brakes last longer and car stop sooner.
P2158 OBD-II Trouble Code: Vehicle Speed Sensor 'B'
P2158 P2158 code definition Vehicle Speed Sensor 'B' What the P2158 code means This trouble code indicates that the powertrain control module has detected a variation in the reference voltage of the vehicle speed sensor 'B' in reference to the...
P2762 OBD-II Trouble Code: Torque Converter Clutch Pressure Control Solenoid Control Circuit Range/Performance Low
P2762 means a problem with the torque converter clutch pressure solenoid control circuit due to a bad or failing transmission or electrical issue.

What causes failure to change gears?

Hi there, and thanks for writing in. There are many possible causes of your transmission shifting issue, though it's impossible to tell what's wrong on yours without first inspecting it. It could have a low fluid level, it could have...

Range Rover Sport v6 2.7 with fault code p2455 but the car does not have any sensor or circuit for the dpf.

Hi there. The DPF apparently was not installed in all markets, which may cause issues if the vehicle did not have it when manufactured, but is transported and sold into a market which does require it. I would check with...

when i turn a corner it seems like i get a hesitation in my wheels, what could that be

Hi there. This type of symptom is commonly caused by power steering fluid that is low, damage to wheel bearings, or other suspension components. If the steering wheel feels "heavy" when you turn, it's also possible that the steering stabilizer...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com