Isuzu i-350 Car is shaking or vibrating Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(313)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(313)

Car is shaking or vibrating Inspection Service

How much does a Car is shaking or vibrating Inspection cost?

On average, the cost for a Isuzu i-350 Car is shaking or vibrating Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Isuzu i-350L5-3.5LService typeCar is shaking or vibrating InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
Show example Isuzu i-350 Car is shaking or vibrating Inspection prices

When your vehicle begins shaking or vibrating while you’re driving, it can be an alarming event and is a sure indication there’s something amiss. This type of behavior can signal a need for anything from a minor repair to something far more serious.

Common reasons for this to happen:

  • Tire issues: The most frequent causes of a vehicle shaking while driving stem from tire issues. Tires begin to behave differently when worn or out of balance. Tire replacement, realignment, and rebalancing are common solutions.


  • Engine firing issues: When one or more of your spark plugs isn’t firing correctly, it can cause your car to vibrate. Typically, this problem will also cause your check engine light to illuminate. If a misfire is responsible, a loss of power or “hesitation” will usually accompany the vibration.


  • Brake system issues: If the vibration or steering-wheel shake only occurs when you apply the brakes, it’s likely time to have your brake pads and rotors checked. As rotors are subjected to heat, puddles, and stress, the metal tends to deform. A warped rotor can occur at anytime, but may also indicate the need for your brake pads to be replaced.

  • Engine mount issues: The motor mount connects the engine to your vehicle’s chassis, and is designed to isolate engine noise and vibration from the passenger compartment. As mounts wear over time, the vibration may be more pronounced at idle while in gear, and may change when the vehicle is placed in neutral or park. Broken motor mounts can lead to larger problems in the driveline, and should be promptly addressed.

  • Suspension issues: Issues with your front suspension can also cause your vehicle to shake or vibrate. When this is the case, your car will act normally when stopped, but will begin vibrating during changes in speed or when traveling over bumps. Suspension problems may also be accompanied by odd noises like periodic clunks, squeals, and squeaks.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the shaking or vibrating, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will check the tires, suspension components, brake system, and mounts to identify the problem.

How important is this service?

Although the cause of your car’s shakes and vibrations may be relatively minor, they may have the potential to wreak havoc on other system components if ignored. Having a skilled technician address the source of the concern early can prevent a minor issue from becoming a major headache. Our expert mechanics have the experience, knowledge, and skills to efficiently diagnose your vehicle’s newfound jitters.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Isuzu mechanics

Real customer reviews from Isuzu owners like you.

Excellent Rating

(313)

Rating Summary
290
13
0
2
8
290
13
0
2
8

Martin

29 years of experience
166 reviews
Martin
29 years of experience
Isuzu Ascender L6-4.2L - Car is shaking or vibrating - Hendersonville, Tennessee
Very nice and knowledgeable. Quickly diagnosed my vehicles problem(s)

Corey

27 years of experience
43 reviews
Corey
27 years of experience
Isuzu i-280 L4-2.8L - Car is not starting - Kennesaw, Georgia
Extremely knowledgeable and very honest!!

Patrick

32 years of experience
369 reviews
Patrick
32 years of experience
Isuzu Rodeo V6-3.2L - Timing Belt - Las Vegas, Nevada
Patrick is a complete professional. He showed up on time and completed the job on time. He replaced a water pump, thermostat and hoses.

James

31 years of experience
694 reviews
James
31 years of experience
Isuzu Rodeo V6-3.2L - Transmission Fluid Service - Buena Park, California
James gets the job done and provide insights on other issues that needs attention.

Excellent Rating

(313)

Rating Summary
290
13
0
2
8
290
13
0
2
8
Number of Isuzu services completed
3443+
services done by our mechanics
TOTAL NUMBER OF EXPERT Isuzu MECHANICS
200+
experts on our platform

Recent articles & questions

Car Seat Ratings Systems: What the Numbers Really Mean
Walk Walk into any big box baby store you’ll find a dizzying array of stuff you never imagined that you’d need. Bassinets, footed pajamas, infant tubs - you name it, they have it. They also have rows and rows of...
The Safest Cars for Teen Drivers
For For a parent, there is nothing more terrifying than handing over a set of car keys to your son or daughter for the first time. When they hit the road, you'll have no control of their safety. Everything will...
P3449 OBD-II Trouble Code: Cylinder l7 Deactivation/Intake Valve Control Circuit/Open
P3449 means there is an issue with the Engine Control Module via the intake valve due to low oil pressure, or faulty solenoid.

I am getting a side detection, front camera service, and park assist service.

The side detection module and the radio receiver module has stopped working and is causing the warning lights to come on. The parts will need to be replaced in order for the camera to work correctly. If you need further...

Shifter slides into neutral w/o using button on shifter and while driving

This is normal way the shifter works. The button would need to be used to get from neutral to reverse. There is nothing wrong with your vehicle's shifter.

I have a code 17748 camshaft pos. /crank shaft pos. Sensor incorrect allocation what does this mean

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com