Isuzu i-290 Coolant Reservoir Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(313)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(313)

Coolant Reservoir Replacement Service

How much does a Coolant Reservoir Replacement cost?

On average, the cost for a Isuzu i-290 Coolant Reservoir Replacement is $349 with $254 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2008 Isuzu i-290L4-2.9LService typeCoolant Reservoir ReplacementEstimate$623.65Shop/Dealer Price$760.82 - $1149.81
2007 Isuzu i-290L4-2.9LService typeCoolant Reservoir ReplacementEstimate$603.65Shop/Dealer Price$740.83 - $1129.84
Show example Isuzu i-290 Coolant Reservoir Replacement prices

What is the Coolant Reservoir all about?

Cooling systems on vehicles are meant to remove heat from critical engine components. The fluid or coolant that circulates through the system carries the heat out of the engine to the radiator, where air flow dissipates the heat it contains. A natural reaction to the heat which the fluid experiences is expansion. If the fluid in the cooling system is at the full mark when the engine is cold, the volume will be greater when the fluid is hot due to expansion. Because the cooling system is closed and pressurized when hot, the excess hot coolant needs to go somewhere. It is pushed into a surge tank, or an overflow tank, where it remains until the engine cools down. When the engine cools, the contraction from the fluid still in the system creates a vacuum and the surge tank’s hose draws the coolant back into the system. If the coolant surge tank is cracked or broken, the coolant will leak onto the ground. An airlock will form in the cooling system when the surge tank hose only draws in air instead of coolant.

Keep in mind:

  • Engine coolant is extremely hot when the engine is at operating temperature. Never open the cooling system when the engine is hot.
  • The surge tank should be flushed when the coolant is being changed out.

How it's done:

  • The coolant is drained into a suitable container and the coolant recovery reservoir cap is removed.

  • The old coolant recovery reservoir is disconnected from all of the hoses hoses and pulled free of the vehicle.

  • The new coolant recovery reservoir is installed into the vehicle and secured. The coolant hoses are installed and secured using new clamps.

  • The coolant is refilled and purged of air as per manufacturer recommendation.

  • The vehicle coolant recovery reservoir is checked for leaks and proper operation.

Our recommendation:

The surge tank itself should never need attention unless it is damaged or broken. Excess engine heat may also warp the container, though it is not common. If your coolant surge tank is broken or leaking, have one of our expert mechanics replace it.

What common symptoms indicate you may need to replace the Coolant Reservoir?

  • Coolant leaking onto the ground when engine is hot.
  • Engine overheats due to an airlock.

How important is this service?

The surge tank is part of the cooling system. It may seem to be auxiliary, but it is essential to proper operation. If the surge tank leaks coolant out, an airlock will form in the engine and it could overheat, causing damage. If your surge tank is broken, have it replaced as soon as possible to prevent further issues.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Isuzu mechanics

Real customer reviews from Isuzu owners like you.

Excellent Rating

(313)

Rating Summary
290
13
0
2
8
290
13
0
2
8

James

8 years of experience
128 reviews
James
8 years of experience
Isuzu i-290 L4-2.9L - Car is not starting - Newnan, Georgia
James was on time and was very thorough in his inspection despite temperatures being below freezing outside while he worked. He was quick in his assessment and even gave us a discount for being first time customers. We’ll gladly use his services again if needed.

Manuel

32 years of experience
581 reviews
Manuel
32 years of experience
Isuzu Trooper V6-3.5L - Alternator - Newport Beach, California
Great mechanic. He's personable and my goto when I have maintenance and repairs needed on my vehicles. I highly recommend him!

Zachary

10 years of experience
19 reviews
Zachary
10 years of experience
Isuzu Rodeo V6-3.2L - Inspection / Diagnostics - Denver, Colorado
good person

Jeremy

20 years of experience
608 reviews
Jeremy
20 years of experience
Isuzu Trooper V6-3.5L - Brake Pads Replacement (Front, Rear) - West Palm Beach, Florida
On time, efficient, knowledgeable, pleasant and professional. Overall satisfaction.

Excellent Rating

(313)

Rating Summary
290
13
0
2
8
290
13
0
2
8
Number of Isuzu services completed
3443+
services done by our mechanics
TOTAL NUMBER OF EXPERT Isuzu MECHANICS
200+
experts on our platform

Recent articles & questions

Top 10 Tips to Be a Better Driver at Night
Nighttime Nighttime driving is inherently risky, even with modern automotive headlights. There are many threats that you might not see, from other drivers to deer and other animals in the road. Whether you’re driving in town or out in the...
P0103 OBD-II Trouble Code: Mass Airflow (MAF) Circuit High Air Flow and High Voltage Output
P0103 Trouble code definition Mass Airflow (MAF) Circuit High Air Flow and High Voltage Output The Code P0103 code is often associated...
Wyoming Parking Laws: Understanding the Basics
Driving Driving is a big responsibility, and people know that they need to pay attention behind the wheel. They need to be careful of their actions, and they have to be aware of the actions of other motorists. However, it...

code P1780

The code is for a possible problem with the transmission control switch on the shifter. The switch should be cycled during the scan test or it will set the code. If the code is still set then you will need...

Reduced engine power light keeps coming on.

When a fault/error in the transmission or engine triggers the Reduced Engine Power Warning Light, the vehicle will experience an extreme loss of power and performance and vehicles may not be able to exceed speeds greater than 20 miles per...

My dodge Dakota revs rpms extremely high when I start the truck vacume lines are good what else might it be?

Hi there. Typically a high engine RPM is caused by a vacuum leak or idle control valve failure. Although you've indicated that the vacuum lines and throttle control sensor are good, you might want to verify all vacuum line connections...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com