Isuzu i-280 Mass Airflow Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(3)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(3)

Mass Airflow Sensor Replacement Service

How much does a Mass Airflow Sensor Replacement cost?

On average, the cost for a Isuzu i-280 Mass Airflow Sensor Replacement is $210 with $115 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Isuzu i-280L4-2.8LService typeMass Airflow Sensor ReplacementEstimate$344.51Shop/Dealer Price$411.89 - $591.53
Show example Isuzu i-280 Mass Airflow Sensor Replacement prices

What is the Mass Airflow Sensor all about?

The mass airflow sensor is a round tunnel made of plastic with a sensor attached inside. All cars take air from the outside and pass it into the engine through the air filter. The mass airflow sensor measures the amount of air entering the engine. For an engine to perform properly, it needs a specific amount of air-fuel mixture. The computer in the car reads the amount of air coming into the engine from the mass airflow sensor and then calculates the correct amount of fuel needed for proper engine performance. If the sensor goes bad, the engine will not know the right amount of fuel to add, causing problems including poor gas mileage, lack of power and more.

It is common for the mass airflow sensor to get dirty (if the air filter is dirty) and lose the ability to read the amount of air coming in the engine. If the vacuum hoses are leaking, it will give the same error code as mass airflow sensor failure.

When doing this job, the mechanic may recommend changing the electrical connector that connects the mass airflow sensor to the car's computer system. It is possible for the wires in the connector to break, causing the mass airflow sensor to not work.

Keep in mind:

  • Routinely changing your air filter can improve the lifespan of your mass airflow sensor
  • Often mass airflow sensors stop working because of bad connectors or wiring harnesses.
  • Anytime the mass airflow sensor is replaced, the air duct between the sensor and the intake manifold should be inspected.

How it's done:

  • Scan the computer in the car for codes.
  • Verify the problem.
  • Remove and replace the sensor if found faulty.
  • Check vacuum hoses for leaks and cracks.
  • Test drive the vehicle.

Our recommendation:

  • Changing the air filter on a regular basis will ensure that the car is getting cleaner air and hence performing optimally.
  • If the Check Engine light is on, get the car inspected as soon as you can.
  • If the Check Engine light is flashing, pull over and get the car towed to avoid costly repairs.
  • A mechanic should always inspect the vacuum hoses and snorkel attached to the mass airflow sensor when replacing it. It is possible for these items to have leaks. Replacing the sensor without fixing the leaks will not solve the problem.

What common symptoms indicate you may need to replace the Mass Airflow Sensor?

  • Check Engine light is on.
  • Car does not have power.
  • Excessive fuel consumption.
  • Car may not start.

How important is this service?

In order to run optimally, your vehicle needs to have a perfect fuel-to-air ratio. As the vehicle is moving, an uncontrollable amount of air enters the throttle body and heads into the intake manifold. As such, the fuel has to be adjusted to be optimal for the amount of air. The mass airflow sensor measures the mass of the air that is entering the vehicle, and sends the information to the car’s computer management system. This system then controls the amount of fuel that is injected into the cylinders, so that the ideal fuel-to-air ratio is achieved. When the mass airflow sensor stops working, the computer cannot receive information on the air intake, and the fuel-to-air ratio will be wrong. This will cause your engine to run poorly, and sometimes not at all. It will also impact your gas mileage.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Isuzu mechanics

Real customer reviews from Isuzu owners like you.

Excellent Rating

(3)

Rating Summary
3
0
0
0
0
3
0
0
0
0

Corey

27 years of experience
43 reviews
Corey
27 years of experience
Isuzu i-280 L4-2.8L - Car is not starting - Kennesaw, Georgia
Extremely knowledgeable and very honest!!

Corey

27 years of experience
43 reviews
Corey
27 years of experience
Isuzu i-280 L4-2.8L - Brake Light Switch - Kennesaw, Georgia
Corey did an awesome job!

Keith

30 years of experience
76 reviews
Keith
30 years of experience
Isuzu Rodeo V6-3.2L - Mass Airflow Sensor - Scottsdale, Arizona
Keith did a great job replacing my mass air flow sensor and answering all my questions regarding my vehicle and YourMechanic's services. I will definitely be a repeat customer!

Luis

15 years of experience
181 reviews
Luis
15 years of experience
Isuzu Axiom V6-3.5L - Mass Airflow Sensor - Las Vegas, Nevada
Luis is a great mechanic who gets the job done in a timely and professional manner. I was so impressed with his services that I booked him for a future appointment to perform more work on my car.

Excellent Rating

(3)

Rating Summary
3
0
0
0
0
3
0
0
0
0
Number of Isuzu Mass Airflow Sensor Replacement services completed
33+
services done by our mechanics
TOTAL NUMBER OF EXPERT Isuzu MECHANICS
200+
experts on our platform

Recent articles & questions

How to Replace an AC Evaporator Sensor
The air conditioning pressure evaporator sensor monitors and adapts to the evaporator's temperature, preventing damage and keeping the AC working.
How to Replace a Manifold Temperature Sensor
Signs of a failing manifold temperature sensor include rough idling and a rough running engine, and may result in a failed emissions test.
How to Replace a Car Battery Temperature Sensor
The battery has a battery temperature sensor that can fail if the Check Engine Light comes on, the battery voltage is low, or the RPM curve surges.

Acceleration issue, RPMs increase but not speed

If your car is revving up but not moving, or is slow at gaining speed, then you have a slipping clutch. If you have a manual or automatic transmission it will still be a clutch issue. A mechanic with experience...

Check Engine Light is ON sometimes and then it turns OFF and then turn back ON again

Based on the information you provided. Your crankshaft position sensor (https://www.yourmechanic.com/services/crankshaft-position-sensor-replacement) is the most likely cause of your concern. You may also see a p0339 code which is also a crankshaft position sensor code. I recommend having a certified professional...

Oil leak coming from behind intake and transmission.

You could have a couple causes of the oil leak at back of intake manifold. (https://www.yourmechanic.com/services/oil-fluid-leak-inspection) This engine oil pressure sending unit is the most common leak in this area of the engine. Replace oil pressure sender if leaking. (https://www.yourmechanic.com/services/oil-pressure-sensor-replacement)...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com