Infiniti FX45 Valve Cover Gasket Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(32)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(32)

Valve Cover Gasket Replacement Service

How much does a Valve Cover Gasket Replacement cost?

On average, the cost for a Infiniti FX45 Valve Cover Gasket Replacement is $736 with $316 for parts and $420 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2003 Infiniti FX45V8-4.5LService typeValve Cover Gasket ReplacementEstimate$1097.18Shop/Dealer Price$1274.13 - $1762.44
2008 Infiniti FX45V8-4.5LService typeValve Cover Gasket ReplacementEstimate$1169.79Shop/Dealer Price$1362.37 - $1918.46
2006 Infiniti FX45V8-4.5LService typeValve Cover Gasket ReplacementEstimate$1070.15Shop/Dealer Price$1237.96 - $1719.41
2004 Infiniti FX45V8-4.5LService typeValve Cover Gasket ReplacementEstimate$1084.75Shop/Dealer Price$1252.87 - $1734.56
2005 Infiniti FX45V8-4.5LService typeValve Cover Gasket ReplacementEstimate$1070.15Shop/Dealer Price$1245.68 - $1732.94
2007 Infiniti FX45V8-4.5LService typeValve Cover Gasket ReplacementEstimate$1169.79Shop/Dealer Price$1363.24 - $1919.97
Show example Infiniti FX45 Valve Cover Gasket Replacement prices

What is a valve cover gasket and how does it work?

Each cylinder head on your car’s engine has an aluminum or plastic valve cover bolted to it. Between this valve cover and the cylinder head, there is a gasket that keeps engine oil from leaking out. The valve cover bolts keep the gasket compressed, thus preventing leaks. Over time the gasket becomes brittle from the engine’s heat or the bolts loosen, creating an engine oil leak.

When to consider replacing a valve cover gasket?

Look for these signs of oil leakage at the valve cover gasket:

  • Oil seepage or dripping. Should the joint between the valve cover and the cylinder head fail, oil often becomes visible on the valve cover or cylinder heads. Usually, the oil will attract and hold dirt.
  • Oil accumulating inside the spark plug well. The spark plug tube seals are part of the valve cover sealing system. If the tube seals are leaking, you will see oil on the spark plugs or wires. The valve cover gasket and tube seals are all replaced at one time if either fails.
  • Oil leakage at the rubber grommets. The bolts holding the valve cover to the cylinder head sometimes have rubber grommet seals under the bolt heads. If these seals are leaking, you will see oil seepage around the bolt heads.

How do mechanics replace a valve cover gasket?

  • Remove engine cover. Some engines have plastic covers over the entire top. The plastic engine cover is removed to access the valve cover(s).
  • Remove components. On 4 cylinder engines, the valve cover is usually readily accessed once any electrical components and emission control tubing are removed, plus any accelerator linkages that might be in the way. On 6 or 8 cylinder engines, depending on which valve cover gasket is leaking, removal of the air intake plenum might be required, as well as additional steps.
  • Remove valve cover. Once the valve cover(s) is accessed, the cover retaining bolts are removed and the cover pulled off. The valve cover sealing surface is checked with a straight edge to be sure the cover is flat and thus reusable.
  • Install new gasket. The new valve cover gasket is applied along with new rubber grommets under the retaining bolt heads. If there are spark plug tube seals, these are replaced as well. In some applications, oil resistant RTV (room temperature vulcanization) sealant must be applied to specific segments of the sealing surface, along with the new gasket, to ensure a complete and effective seal. The cover is bolted back on, using a calibrated inch pound torque wrench, and all other components are restored to their original position.
  • Check for leaks. Finally, the car engine is run and a visual check is made for oil leaks.

Is it safe to drive with a valve cover gasket problem?

Yes, as long as the amount of oil leaking is small, and there is no leak onto hot engine parts such as the exhaust manifold, it is safe to drive your car until you have an opportunity to fix it.

If you notice oil leaking on to the ground beneath your car after it is parked, you do not have a small leak, and it needs to be found and repaired as soon as possible. Any leak, of course, means your oil level is dropping as you drive the car. If you have a leak, be sure to check your oil more frequently than usual so you do not run low on oil and damage the engine.

When replacing a valve cover gasket keep in mind:

  • The mechanical components of a car engine will typically outlive the gaskets used to seal the engine. However, many of these gaskets, including the valve cover gaskets, are relatively easy to replace.
  • Never add stop leak type products to engine oil or other vehicle fluids. Not only are these materials not approved or specified by the original equipment manufacturers, but they also can create additional problems that may be costly to repair.
  • Often, if a car is old enough to have a valve cover oil leak, there will be oil leaks elsewhere on the engine, so you should request a complete leak inspection. It may be more cost effective to repair multiple leaks during one service call.
  • Often, the PCV (Positive Crankcase Ventilation) valve is inserted into a rubber grommet in one of the valve covers. An old rubber grommet is a potential leak source, as well as connections to the PCV valve. These components should be inspected and considered for replacement while there is access to the valve cover.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Infiniti mechanics

Real customer reviews from Infiniti owners like you.

Excellent Rating

(32)

Rating Summary
31
1
0
0
0
31
1
0
0
0

Pardeep

22 years of experience
1277 reviews
Pardeep
22 years of experience
Infiniti FX45 V8-4.5L - Valve Cover Gasket - Sunnyvale, California
Very experienced!

Nicholas

22 years of experience
354 reviews
Nicholas
22 years of experience
Infiniti FX45 V8-4.5L - Pre-purchase Car Inspection - Englewood, Colorado
Nick was great. He saved me a major headache because I was able to get a pre sale inspection and it was worth every penny. Nick was detailed and provided a great insight into potential issues and explained everything. I will only use Nick going forward m

Leland

14 years of experience
9 reviews
Leland
14 years of experience
Infiniti FX45 V8-4.5L - Crankshaft Position Sensor - Canton, Georgia
He was exactly what you would hope for. On time. Professional. Thorough. Friendly.

Edgar

26 years of experience
41 reviews
Edgar
26 years of experience
Infiniti FX45 V8-4.5L - 60,000 Miles Maintenance Service - Palo Alto, California
Edgar came to my home to perform a 60k mile service on my Infiniti FX45. He gave me a call to let me know he was on his way and arrived promptly. He was very friendly in his demeanor and professional in communicating what checks he was doing and reporting on the condition of the car. He brought all the equipment he needed in his mobile shop and completed the service in the estimated time. I highly recommend Edgar if you have any mechanic needs!

Excellent Rating

(32)

Rating Summary
31
1
0
0
0
31
1
0
0
0
Number of Infiniti FX45 services completed
352+
services done by our mechanics
TOTAL NUMBER OF EXPERT Infiniti MECHANICS
1000+
experts on our platform

Recent articles & questions

How to Replace Axle Seals
Axle seals fail when there is a visible leak or a major puddle of gear oil underneath the vehicle. In some cases, the axle may pop out entirely.
P0328 OBD-II Trouble Code: Knock Sensor 1 Circuit High Input (Bank 1 or Single Sensor)
P0328 code definition P0328 is a general OBD2 diagnostic trouble code pointing to a fault within the knock sensor 1 circuit. What...
How to Become a Certified Mobile Vehicle Inspector (State Car Inspector Certified) in Idaho
Automotive technician jobs include mobile vehicle inspectors. Repair facilities, dealerships, and garages can become certified to inspect vehicles.

Brake pedal has too much play.

Brake issues are always a big concern for any driver. I am going to assume from the description provided that both the front and rear brakes were replaced on your vehicle. If, despite these new parts, you are still experiencing...

What is the average time for this procedure

Hi there. A professional mechanic that has secured the right tools, supplies and materials to complete these jobs should complete them in less than 10 service hours on a 2000 Chrysler Sebring.

How much to install rods and pistons

Hi Kent. Thanks for contacting us today. Unfortunately, internal engine rebuild service is not one our mobile mechanics offer. Installing new pistons, rings, connecting rods and others requires machining the engine block first, which is something that should be done...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com