Hyundai Genesis Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(186)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(186)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Hyundai Genesis Power Steering Pressure Hose Replacement is $343 with $133 for parts and $210 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2014 Hyundai GenesisV8-5.0LService typePower Steering Pressure Hose ReplacementEstimate$1520.60Shop/Dealer Price$1848.03 - $2818.15
2011 Hyundai GenesisV8-4.6LService typePower Steering Pressure Hose ReplacementEstimate$1507.09Shop/Dealer Price$1831.86 - $2800.00
2010 Hyundai GenesisV6-3.8LService typePower Steering Pressure Hose ReplacementEstimate$1507.09Shop/Dealer Price$1831.90 - $2800.07
2010 Hyundai GenesisV8-4.6LService typePower Steering Pressure Hose ReplacementEstimate$1507.09Shop/Dealer Price$1831.90 - $2800.06
2013 Hyundai GenesisV6-3.8LService typePower Steering Pressure Hose ReplacementEstimate$1507.09Shop/Dealer Price$1834.11 - $2803.93
2012 Hyundai GenesisV6-3.8LService typePower Steering Pressure Hose ReplacementEstimate$1507.09Shop/Dealer Price$1832.11 - $2800.43
2015 Hyundai GenesisV6-3.8LService typePower Steering Pressure Hose ReplacementEstimate$589.85Shop/Dealer Price$685.37 - $965.62
2016 Hyundai GenesisV6-3.8LService typePower Steering Pressure Hose ReplacementEstimate$589.85Shop/Dealer Price$685.35 - $965.58
Show example Hyundai Genesis Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Hyundai mechanics

Real customer reviews from Hyundai owners like you.

Excellent Rating

(186)

Rating Summary
177
6
1
1
1
177
6
1
1
1

Russell

25 years of experience
356 reviews
Russell
25 years of experience
Hyundai Genesis V8-5.0L - Pre-purchase Car Inspection - Portland, Oregon
Russell was great. He was easy to talk to and very knowledgeable about my car. I would feel comfortable with him doing work for me.

Saul

9 years of experience
17 reviews
Saul
9 years of experience
Hyundai Genesis V6-3.8L - Car Battery Replacement - Redondo Beach, California
Saul was a very experienced, highly technical mechanic. Answered all the questions I had for him pertaining to my vehicle. My experience in using yourmechanic was first rate

Jason

24 years of experience
190 reviews
Jason
24 years of experience
Hyundai Genesis V8-4.6L - Oil Change - Nashville, Tennessee
I really appreciated Jason for many reasons. He was down to earth, honest, and knowledgable. Will be using him again!

Brian

23 years of experience
23 reviews
Brian
23 years of experience
Hyundai Genesis V6-3.8L - Brake Pads Replacement (Front) - Morrisville, North Carolina
Excellent service. Very personable and knew his was around a vehicle. Will be using him for more services in the future.

Excellent Rating

(186)

Rating Summary
177
6
1
1
1
177
6
1
1
1
Number of Hyundai Genesis services completed
2046+
services done by our mechanics
TOTAL NUMBER OF EXPERT Hyundai MECHANICS
1300+
experts on our platform

Recent articles & questions

When Is My Child Ready to Use a Seat Belt?
In In all major life events, we often consider age as the prime factor in determining readiness – from when a child is ready to start school to when they can obtain a driver’s license, and everything beyond and between....
How to Prevent Motor Oil Sludge
Regular oil changing in your car helps prevent sludge. Motor oil sludge can cause worse gas mileage, low oil pressure, and damage to engine parts.
A Buyer’s Guide to the 2012 Lexus HS 250h
Hybrids Hybrids have come a long way in the last few years, and the 2012 Lexus HS 250h is a prime example of just how much they’ve evolved. This sedan is quiet, composed and chock-full of high tech equipment. Key...

Car loses power while accelerating

Hi. If your car is suffering in performance and the wrench indicator light has come on, then that means the vehicle needs to be serviced. A professional technician, such as one from YourMechanic, should be able to scan the vehicle...

Isn't the timing belt suppose to be changed at 90,000?

I would definitely recommend changing the timing belt (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-timing-belt) at the 90,000 mile recommended interval. As you may know, the timing belt keeps your engine's critical components in sync. Fortunately, this model does NOT have what is called an "interference"...

My 2014 dodge journey has tried to overheat 2 times in 6 weeks. Both times tge coolant level was low.

Hello there. If the dealership has indicated that you have coolant inside of a cylinder, then it is quite likely that the head gasket failed, causing coolant to seep into the oil galleys and into the combustion chamber. However, a...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com