logo

Hyundai Genesis Coupe Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(88)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

(88)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Hyundai Genesis Coupe Control Arm Assembly Replacement is $266 with $98 for parts and $168 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2012 Hyundai Genesis CoupeV6-3.8LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$1065.94Shop/Dealer Price$1276.19 - $1893.96
2016 Hyundai Genesis CoupeV6-3.8LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$1051.52Shop/Dealer Price$1258.94 - $1874.60
2015 Hyundai Genesis CoupeV6-3.8LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$789.74Shop/Dealer Price$931.76 - $1351.11
2010 Hyundai Genesis CoupeL4-2.0L TurboService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$690.57Shop/Dealer Price$821.64 - $1209.85
2012 Hyundai Genesis CoupeV6-3.8LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$537.54Shop/Dealer Price$618.86 - $850.83
2014 Hyundai Genesis CoupeV6-3.8LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$755.54Shop/Dealer Price$889.23 - $1283.10
2010 Hyundai Genesis CoupeL4-2.0L TurboService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$372.65Shop/Dealer Price$424.26 - $574.04
2012 Hyundai Genesis CoupeL4-2.0L TurboService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$690.57Shop/Dealer Price$821.64 - $1209.85
Show example Hyundai Genesis Coupe Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Number of Hyundai Genesis Coupe services completed
968+
services done by our mechanics
TOTAL NUMBER OF EXPERT Hyundai MECHANICS
1300+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Meet some of our expert Hyundai mechanics

Real customer reviews from Hyundai owners like you.

Excellent Rating

(88)
Rating Summary
76
9
3
0
0
76
9
3
0
0

Mostafa

15 years of experience
47 reviews
Request Mostafa
Mostafa
15 years of experience
Request Mostafa
by Nyenty Ayuk
Genesis Coupe 2011 - Serpentine/Drive Belt - Smyrna, GA
Mostafas was early and immediately got everything set to get the job done. He was knowledgeable about the job and even gave me some great tips for my car highly recommended.

James

25 years of experience
733 reviews
Request James
James
25 years of experience
Request James
by Jacey Garcia
Genesis Coupe 2014 - Differential / Gear Oil - Brea, CA
Very professional and courteous. I will definitely reccomend James to family and friends.

Marco

24 years of experience
157 reviews
Request Marco
Marco
24 years of experience
Request Marco
by Beatriz Martinez
Genesis Coupe 2013 - Brake Pads - Perris, CA
(:

David

5 years of experience
188 reviews
Request David
David
5 years of experience
Request David
by Kirk dillon
Genesis Coupe 2011 - Stabilizer Bar Links - Winter Springs, FL
Very knowledgeable would recommend to anyone.

Excellent Rating

(88)
Rating Summary
76
9
3
0
0
76
9
3
0
0
Number of Hyundai Genesis Coupe services completed
968+
services done by our mechanics
TOTAL NUMBER OF EXPERT Hyundai MECHANICS
1300+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Recent articles & questions

P2729 OBD-II Trouble Code: Pressure Control Solenoid E Control Circuit Low
P2729 means a solenoid has malfunctioned due to a failing transmission, faulty sensors or solenoids, low fluid levels or electrical issues
Read more
B1921 OBD-II Trouble Code: Air Bag Diagnostic Monitor Ground Circuit Open
B1921 means there is an issue with the airbag system diagnostic module, likely because of faulty electrical components.
Read more
How to Renew Your Car Registration in Minnesota
Being Being able to drive on the Minnesota roadways is a privilege that most people neglect. If you are the owner of a vehicle, you will have to make sure that it is registered with the Minnesota Driver and Vehicle...
Read more

Reset after battery replacement

Hi. This is a common problem for the Vues and typically is just a fuse that has gone bad. There is a service bulletin for the 15A Audio fuse in the center console fuse block that other owners have replaced...
Read more

Put key in ignition. Lights and everything come on for a second, then went off as I turned the key. Now no power, key stuck

Hi, thanks for writing in. This sounds like your battery cable connections are corroded or loose at the battery. Try to see if the battery connections are loose by wiggling them and see if power returns. If power returns, then...
Read more

What mean check feud cap on my Honda

The computer has detected the fuel cap is loose or you have a leak in the evaporative gas tank vapor control system. If gas cap is tight and not off or loose then you will need to have the system...
Read more
  1. Home
  2. Estimates
  3. Hyundai
  4. Genesis Coupe
  5. Control Arm Assembly Replacement

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com

Read FAQ
GET A QUOTE