Hyundai Entourage Mass Airflow Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(55)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(55)

Mass Airflow Sensor Replacement Service

How much does a Mass Airflow Sensor Replacement cost?

On average, the cost for a Hyundai Entourage Mass Airflow Sensor Replacement is $231 with $136 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2008 Hyundai EntourageV6-3.8LService typeMass Airflow Sensor ReplacementEstimate$386.59Shop/Dealer Price$464.49 - $675.69
2010 Hyundai EntourageV6-3.8LService typeMass Airflow Sensor ReplacementEstimate$403.17Shop/Dealer Price$490.23 - $728.88
2009 Hyundai EntourageV6-3.8LService typeMass Airflow Sensor ReplacementEstimate$403.17Shop/Dealer Price$490.23 - $728.88
2007 Hyundai EntourageV6-3.8LService typeMass Airflow Sensor ReplacementEstimate$366.59Shop/Dealer Price$444.49 - $655.68
Show example Hyundai Entourage Mass Airflow Sensor Replacement prices

What is the Mass Airflow Sensor all about?

The mass airflow sensor is a round tunnel made of plastic with a sensor attached inside. All cars take air from the outside and pass it into the engine through the air filter. The mass airflow sensor measures the amount of air entering the engine. For an engine to perform properly, it needs a specific amount of air-fuel mixture. The computer in the car reads the amount of air coming into the engine from the mass airflow sensor and then calculates the correct amount of fuel needed for proper engine performance. If the sensor goes bad, the engine will not know the right amount of fuel to add, causing problems including poor gas mileage, lack of power and more.

It is common for the mass airflow sensor to get dirty (if the air filter is dirty) and lose the ability to read the amount of air coming in the engine. If the vacuum hoses are leaking, it will give the same error code as mass airflow sensor failure.

When doing this job, the mechanic may recommend changing the electrical connector that connects the mass airflow sensor to the car's computer system. It is possible for the wires in the connector to break, causing the mass airflow sensor to not work.

Keep in mind:

  • Routinely changing your air filter can improve the lifespan of your mass airflow sensor
  • Often mass airflow sensors stop working because of bad connectors or wiring harnesses.
  • Anytime the mass airflow sensor is replaced, the air duct between the sensor and the intake manifold should be inspected.

How it's done:

  • Scan the computer in the car for codes.
  • Verify the problem.
  • Remove and replace the sensor if found faulty.
  • Check vacuum hoses for leaks and cracks.
  • Test drive the vehicle.

Our recommendation:

  • Changing the air filter on a regular basis will ensure that the car is getting cleaner air and hence performing optimally.
  • If the Check Engine light is on, get the car inspected as soon as you can.
  • If the Check Engine light is flashing, pull over and get the car towed to avoid costly repairs.
  • A mechanic should always inspect the vacuum hoses and snorkel attached to the mass airflow sensor when replacing it. It is possible for these items to have leaks. Replacing the sensor without fixing the leaks will not solve the problem.

What common symptoms indicate you may need to replace the Mass Airflow Sensor?

  • Check Engine light is on.
  • Car does not have power.
  • Excessive fuel consumption.
  • Car may not start.

How important is this service?

In order to run optimally, your vehicle needs to have a perfect fuel-to-air ratio. As the vehicle is moving, an uncontrollable amount of air enters the throttle body and heads into the intake manifold. As such, the fuel has to be adjusted to be optimal for the amount of air. The mass airflow sensor measures the mass of the air that is entering the vehicle, and sends the information to the car’s computer management system. This system then controls the amount of fuel that is injected into the cylinders, so that the ideal fuel-to-air ratio is achieved. When the mass airflow sensor stops working, the computer cannot receive information on the air intake, and the fuel-to-air ratio will be wrong. This will cause your engine to run poorly, and sometimes not at all. It will also impact your gas mileage.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Hyundai mechanics

Real customer reviews from Hyundai owners like you.

Excellent Rating

(55)

Rating Summary
50
2
0
1
2
50
2
0
1
2

David

10 years of experience
193 reviews
David
10 years of experience
Hyundai Entourage V6-3.8L - Control Arm Assembly Replacement (Front Lower Left) - Philadelphia, Pennsylvania
Came on time and was fast, kind, and courteous

Brandon

20 years of experience
773 reviews
Brandon
20 years of experience
Hyundai Entourage V6-3.8L - Valve Cover Gasket - Apopka, Florida
Brandon did excellent work and was extremely professional. I hope to have Brandon do any repairs I may need in the future.

Richard

11 years of experience
265 reviews
Richard
11 years of experience
Hyundai Entourage V6-3.8L - Check Engine Light is on - Goodlettsville, Tennessee
He showed up on time and was very quick diagnosing what the problem was. He gave me options as to the best course of fixing the problem.

Nathan

29 years of experience
260 reviews
Nathan
29 years of experience
Hyundai Entourage V6-3.8L - Starter - Broken Arrow, Oklahoma
Nathan was on time and very nice. He worked on my car , we talked and he got the job done. My car is finally running again. I will be using Nathan again and recommending him to others.

Excellent Rating

(55)

Rating Summary
50
2
0
1
2
50
2
0
1
2
Number of Hyundai Entourage services completed
605+
services done by our mechanics
TOTAL NUMBER OF EXPERT Hyundai MECHANICS
1300+
experts on our platform

Recent articles & questions

How Long Do Wiring Harnesses Last?
Car wiring harnesses connect all the different electrical systems and components in a vehicle. Wiring harnesses can last the lifetime of the vehicle.
Symptoms of a Bad or Failing EGR Temperature Sensor
Common signs include engine ping or knock, the Check Engine Light coming on, and failing an emissions test.
How Long Does a Barometric Sensor Last?
The The barometric sensor (also called the barometric pressure sensor, or BAP) is one of a number of sensors on cars that have computer-controlled engines. All it does is measure atmospheric pressure, essentially the same way that a weather barometer...

Crankshaft position sensor. 2012 Chrysler 200

Hey there. The crank sensor is at the rear of the motor. You have to remove the heat shield to get access to the sensor. If you need assistance with this repair, an expert technician from YourMechanic can come to...

What is P0335 Crankshaft Position Sensor A Circuit and where is it located?

Hello - this message (P0335 (https://www.yourmechanic.com/article/p0335-obd-ii-trouble-code-crankshaft-position-sensor-a-circuit-malfunction-by-spencer-clayton)) indicates that the crankshaft position sensor (https://www.yourmechanic.com/services/crankshaft-position-sensor-replacement) is failing, causing the "cutting off" you have already noticed. It is located on the bottom of the engine/transmission interface (drivers side of the vehicle). To avoid...

Knock sensor honda element

An engine knock sensor will cause timing to be retarded if there is an engine knock but should not cause any no start conditions.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com