Honda Fit Valve Cover Gasket Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(428)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(428)

Valve Cover Gasket Replacement Service

How much does a Valve Cover Gasket Replacement cost?

On average, the cost for a Honda Fit Valve Cover Gasket Replacement is $197 with $57 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2013 Honda FitElectricService typeValve Cover Gasket ReplacementEstimate$559.66Shop/Dealer Price$636.31 - $851.66
2014 Honda FitL4-1.5LService typeValve Cover Gasket ReplacementEstimate$553.08Shop/Dealer Price$628.96 - $849.16
2010 Honda FitL4-1.5LService typeValve Cover Gasket ReplacementEstimate$634.18Shop/Dealer Price$730.38 - $1011.44
2017 Honda FitL4-1.5LService typeValve Cover Gasket ReplacementEstimate$483.94Shop/Dealer Price$542.58 - $710.95
2016 Honda FitL4-1.5LService typeValve Cover Gasket ReplacementEstimate$483.94Shop/Dealer Price$545.23 - $715.60
2007 Honda FitL4-1.5LService typeValve Cover Gasket ReplacementEstimate$259.39Shop/Dealer Price$289.74 - $376.29
2011 Honda FitL4-1.5LService typeValve Cover Gasket ReplacementEstimate$634.18Shop/Dealer Price$730.40 - $1011.48
2014 Honda FitElectricService typeValve Cover Gasket ReplacementEstimate$588.94Shop/Dealer Price$673.83 - $920.95
Show example Honda Fit Valve Cover Gasket Replacement prices

What is a valve cover gasket and how does it work?

Each cylinder head on your car’s engine has an aluminum or plastic valve cover bolted to it. Between this valve cover and the cylinder head, there is a gasket that keeps engine oil from leaking out. The valve cover bolts keep the gasket compressed, thus preventing leaks. Over time the gasket becomes brittle from the engine’s heat or the bolts loosen, creating an engine oil leak.

When to consider replacing a valve cover gasket?

Look for these signs of oil leakage at the valve cover gasket:

  • Oil seepage or dripping. Should the joint between the valve cover and the cylinder head fail, oil often becomes visible on the valve cover or cylinder heads. Usually, the oil will attract and hold dirt.
  • Oil accumulating inside the spark plug well. The spark plug tube seals are part of the valve cover sealing system. If the tube seals are leaking, you will see oil on the spark plugs or wires. The valve cover gasket and tube seals are all replaced at one time if either fails.
  • Oil leakage at the rubber grommets. The bolts holding the valve cover to the cylinder head sometimes have rubber grommet seals under the bolt heads. If these seals are leaking, you will see oil seepage around the bolt heads.

How do mechanics replace a valve cover gasket?

  • Remove engine cover. Some engines have plastic covers over the entire top. The plastic engine cover is removed to access the valve cover(s).
  • Remove components. On 4 cylinder engines, the valve cover is usually readily accessed once any electrical components and emission control tubing are removed, plus any accelerator linkages that might be in the way. On 6 or 8 cylinder engines, depending on which valve cover gasket is leaking, removal of the air intake plenum might be required, as well as additional steps.
  • Remove valve cover. Once the valve cover(s) is accessed, the cover retaining bolts are removed and the cover pulled off. The valve cover sealing surface is checked with a straight edge to be sure the cover is flat and thus reusable.
  • Install new gasket. The new valve cover gasket is applied along with new rubber grommets under the retaining bolt heads. If there are spark plug tube seals, these are replaced as well. In some applications, oil resistant RTV (room temperature vulcanization) sealant must be applied to specific segments of the sealing surface, along with the new gasket, to ensure a complete and effective seal. The cover is bolted back on, using a calibrated inch pound torque wrench, and all other components are restored to their original position.
  • Check for leaks. Finally, the car engine is run and a visual check is made for oil leaks.

Is it safe to drive with a valve cover gasket problem?

Yes, as long as the amount of oil leaking is small, and there is no leak onto hot engine parts such as the exhaust manifold, it is safe to drive your car until you have an opportunity to fix it.

If you notice oil leaking on to the ground beneath your car after it is parked, you do not have a small leak, and it needs to be found and repaired as soon as possible. Any leak, of course, means your oil level is dropping as you drive the car. If you have a leak, be sure to check your oil more frequently than usual so you do not run low on oil and damage the engine.

When replacing a valve cover gasket keep in mind:

  • The mechanical components of a car engine will typically outlive the gaskets used to seal the engine. However, many of these gaskets, including the valve cover gaskets, are relatively easy to replace.
  • Never add stop leak type products to engine oil or other vehicle fluids. Not only are these materials not approved or specified by the original equipment manufacturers, but they also can create additional problems that may be costly to repair.
  • Often, if a car is old enough to have a valve cover oil leak, there will be oil leaks elsewhere on the engine, so you should request a complete leak inspection. It may be more cost effective to repair multiple leaks during one service call.
  • Often, the PCV (Positive Crankcase Ventilation) valve is inserted into a rubber grommet in one of the valve covers. An old rubber grommet is a potential leak source, as well as connections to the PCV valve. These components should be inspected and considered for replacement while there is access to the valve cover.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Honda mechanics

Real customer reviews from Honda owners like you.

Excellent Rating

(428)

Rating Summary
407
8
5
1
7
407
8
5
1
7

Bryan

2 years of experience
6 reviews
Bryan
2 years of experience
Fit 2008 - Brake Light Switch - Fort Lauderdale, FL
Great job Bryan. Prompt, courteous. Thanks.

Francisco

10 years of experience
45 reviews
Francisco
10 years of experience
Fit 2011 - Brake Rotor/Disc - Georgetown, TX
Professional friendly timely

Andre

15 years of experience
31 reviews
Andre
15 years of experience
Fit 2015 - Battery - Arlington, VA
Timely, efficient, and friendly.

Stephen

28 years of experience
132 reviews
Stephen
28 years of experience
Fit 2007 - Oxygen Sensor - Lafayette, CO
On time, quick and professional. I will be calling him again in the future! Thank you for fixing Betsey.

Excellent Rating

(428)

Rating Summary
407
8
5
1
7
407
8
5
1
7
Number of Honda Fit services completed
4708+
services done by our mechanics
TOTAL NUMBER OF EXPERT Honda MECHANICS
1700+
experts on our platform

Recent articles & questions

The Guide to Colored Curb Zone Laws in Virginia
Drivers Drivers in Virginia need to make sure that they are following all of the rules of the road when they are behind the wheel, as well as when they are getting ready to park their vehicle. If you park...
How Can the Light Bulb Wiring Become Damaged?
Your Your car is as much electrical as it is mechanical. Wiring harnesses snake their way around the engine bay, and throughout the cabin of the vehicle. Most of your accessories run on electricity, and even the engine needs a...
How to Deal With Glare While Driving at Night
Driving Driving at night (https://www.yourmechanic.com/article/how-to-drive-your-vehicle-safely-at-night-by-cheryl-knight) is hard enough without having to deal with glare. Glare is usually caused by dirty windows or mirrors, bad vision, and the improper use of lights by other drivers. Luckily, you can take some steps...

Seat adjustment not working

Depending on whether your seat is mechanical or electronic can change the possibilities of this issue. Another possibility is that something could be stuck in the seat track, preventing the seat to move forward. The electronic motor/switch could have failed,...

Catalytic converter rust repair? 2003 Ford Escort

Hello - the short answer is that repairing the case of a catalytic converter (https://www.yourmechanic.com/article/how-long-does-a-catalytic-converter-last) is not a good idea. With your mileage, the catalyst is likely at a very low efficiency point in its life. Also, the evidence of...

clutch not fully engaging on ford ranger

Hi there. From the description you have provided, the clutch not fully engaging, is not likely to be an air bubble in the hydraulic system. Had the clutch not fully disengaged (https://www.yourmechanic.com/services/clutch-is-not-fully-disengaging-inspection), would have led me to believe air in...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com