Honda CR-Z Lubricate Driveshaft at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(25)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(25)

Lubricate Driveshaft Service

How much does a Lubricate Driveshaft cost?

On average, the cost for a Honda CR-Z Lubricate Driveshaft is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2011 Honda CR-ZL4-1.5L HybridService typeLubricate DriveshaftEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2013 Honda CR-ZL4-1.5L HybridService typeLubricate DriveshaftEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2016 Honda CR-ZL4-1.5L HybridService typeLubricate DriveshaftEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2014 Honda CR-ZL4-1.5L HybridService typeLubricate DriveshaftEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2012 Honda CR-ZL4-1.5L HybridService typeLubricate DriveshaftEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2015 Honda CR-ZL4-1.5L HybridService typeLubricate DriveshaftEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example Honda CR-Z Lubricate Driveshaft prices

What is lubricating the driveshaft all about?

Along the drivetrain, whenever torque needs to travel from one place to another, a driveshaft is used. Some cars have two driveshafts under them, usually for four-wheel-drive applications. U-Joints are couplings that hold sections of driveshaft together and can withstand large amounts of torque. The U-joint and the slip both need lubrication to work smoothly. This means lubricant needs to be applied to every point where the driveshaft meets another section of shaft or any other part of the vehicle.

Keep in mind:

  • While lubricating will help with scraping noise and minor vibration, it will not repair actually broken parts.
  • Inspect the parts of the the driveshaft to make sure they do not need full replacement.
  • Even small spots of excess wear are bad on parts that withstand so much torque, no problem is too small to be addressed on the driveshaft.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The slip joints and U-joints on all drive shafts are located
  • The Zerk grease fittings on the slip joint and U-joints are located
  • New grease is pumped into the grease fittings with a grease gun
  • The vehicle is lowered off of the jack stands

Our recommendation:

Check the manual of your vehicle to see if the manufacturer has specific instructions on servicing and lubricating the driveshaft. If the manufacturer suggests it is time for a service or if the vehicle has symptoms of a malfunctioning driveshaft, then it should be done immediately. These parts are under a lot of force and will usually fail when the car is in motion. While under the vehicle, inspect all of the connections along the drivetrain and keep an eye out for any parts that seems excessively worn. Bring a rag and wipe any mud or dust off to check for damage.

What are the common symptoms indicating you need to lubricate the driveshaft?

  • Clicking or grating sounds while the vehicle is in gear
  • Vibration in the vehicle while it is running

How important is this service?

This service is very important. Poor lubrication is one of the top reasons why driveshafts fail. When they do fail, driveshafts will fail while in motion and can take out more expensive parts around them. These preventative maintenance steps are extremely important in order to avoid more costs down the road.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Honda mechanics

Real customer reviews from Honda owners like you.

Excellent Rating

(25)

Rating Summary
23
0
0
1
1
23
0
0
1
1

Michael

16 years of experience
606 reviews
Michael
16 years of experience
Honda CR-Z L4-1.5L Hybrid - Brake Pads Replacement (Front, Rear) - Marietta, Georgia
Super through inspection & straight forward explanation of repair work process!

Luis

9 years of experience
130 reviews
Luis
9 years of experience
Honda CR-Z L4-1.5L Hybrid - Oil Change - Hawthorne, New York
Luis was great! On time, friendly, and clear communication. Will book with him again.

Manuel

32 years of experience
579 reviews
Manuel
32 years of experience
Honda CR-Z L4-1.5L Hybrid - Exterior Door Handle Replacement (Driver Side Front) - Irvine, California
Great easy experience!

Brett

10 years of experience
197 reviews
Brett
10 years of experience
Honda CR-Z L4-1.5L Hybrid - Car Battery Replacement - Austin, Texas
Brett was great! On time, polite and personable and knew what he was doing. Highly recommend!

Excellent Rating

(25)

Rating Summary
23
0
0
1
1
23
0
0
1
1
Number of Honda CR-Z services completed
275+
services done by our mechanics
TOTAL NUMBER OF EXPERT Honda MECHANICS
1700+
experts on our platform

Recent articles & questions

How Does Cold Weather Affect Car Hoses?
Cold winter temperatures can cause damage to car engine hoses. Inspect car hoses during the cold months to make sure they're in good shape.
P2073 OBD-II Trouble Code: Manifold Absolute Pressure/ Mass Air Flow - Throttle Position Correlation at Idle
P2073 P2073 code definition Manifold Absolute Pressure/ Mass Air Flow - Throttle Position Correlation at Idle What the P2073 code means This trouble code indicates that the reference voltages of the manifold absolute pressure, mass air flow, and throttle position...
How to Get Mitsubishi Dealership Certified
Mitsubishi dealerships offer automotive technician jobs to mechanics who are ASE certified or have completed the UTI Automotive Technology program.

Is the problem my fuel pump, relay, or connector.

It could be all three problems. The fuel pump may be drawing too many amps or connection at the pump is not making real good contact and needs pump and connector replaced. The fuel pump relay and contact connector pins...

Turn signals do not work but hazards do

The turn signals use fuse number 6 in interior fuse box and have a seperate flasher from the hazards. If the hazards work then the turn signals should work. You should check fuse for power at fuse box and flasher...

Well it ran cold started making a ticking sound then couldn’t press the gas pedal it stopped working wheel seemed like it locked and when tried to restart makes loud clunking noise

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com