GMC Yukon XL 1500 Clunking or knocking noise from wheels Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(286)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(286)

Clunking or knocking noise from wheels Inspection Service

How much does a Clunking or knocking noise from wheels Inspection cost?

On average, the cost for a GMC Yukon XL 1500 Clunking or knocking noise from wheels Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2012 GMC Yukon XL 1500V8-6.2LService typeClunking or knocking noise from wheels InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2009 GMC Yukon XL 1500V8-5.3LService typeClunking or knocking noise from wheels InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2005 GMC Yukon XL 1500V8-5.3LService typeClunking or knocking noise from wheels InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2007 GMC Yukon XL 1500V8-6.0LService typeClunking or knocking noise from wheels InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2013 GMC Yukon XL 1500V8-5.3LService typeClunking or knocking noise from wheels InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2014 GMC Yukon XL 1500V8-5.3LService typeClunking or knocking noise from wheels InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2010 GMC Yukon XL 1500V8-6.2LService typeClunking or knocking noise from wheels InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2008 GMC Yukon XL 1500V8-5.3LService typeClunking or knocking noise from wheels InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example GMC Yukon XL 1500 Clunking or knocking noise from wheels Inspection prices

Clunking or knocking noises can be very disconcerting for any driver to hear while they are going down the road. While these noises may be a symptom of some different issues, all are usually related to a suspension component that has failed. When a suspension component has failed, the ride or the vehicle may be altered. If the failed component is not dealt with, it can lead to increasingly difficult and dangerous problems.

How this system works:

Your vehicle’s suspension system is designed to minimize friction between the tires and the road, ensuring a comfortable ride for you and your passengers. Many of the components that may cause a clunking or knocking noise are not only a part of the suspension, but help control the steering of the vehicle. Any issues regarding the steering or suspension of the vehicle should be looked at by a mechanic as they will only become worse over time.

Common reasons for this to happen:

  • Bad Ball Joints: Ball joints connect the vehicle’s wheel hubs to the rest of the suspension components. Depending on the vehicle, one or two ball joints per wheel and may or may not be load bearing. If a ball joint is beginning to fail, you may notice a clunking noise coming from the front wheels. This clunking noise will become louder and more frequent over time. You may also notice that your steering has been affected by the bad ball joint, potentially causing vibration in the steering wheel.

  • Bad Sway Bar Link: A vehicle’s sway bar or anti-roll bar, helps reduce body roll while cornering. Sway bars can help keep a vehicle from rolling over when going around a sharp corner. If the sway bar breaks or is damaged it may produce a clunking or knocking sound, especially when going over bumps. Your vehicle may also had more difficulty handling when the sway bar is damaged.

  • Bad Tie Rods: Tie rods connect a vehicle’s steering rack to the steering arm. This helps translate the turning of the steering wheel to the direction of the tires. When a tie rod end is worn or loose, they may produce a clunking noise. Worn tie rod ends may also cause more play in the steering wheel, making turning more vague.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason for the clunking or knocking noise from the wheels. The mechanic will then provide a detailed inspection report outlining the reason for the noise and the cost of any repairs that need to be made.

How it's done:

Telling a mechanic about any unusual sensations, in addition to the clunking or knocking noise, you may have observed, will help him or her understand what went wrong with the vehicle.

The mechanic will begin by lifting the front of the vehicle off the ground and shaking the front tires to check for play. If there is play in the front tires, the mechanic will suspect bad ball joints. The mechanic will then remove the wheel and the control arm(s) in order to access the faulty ball joint. He or she will then remove the old ball joint and replace it with a new one. The mechanic should also ensure that the new ball joint is properly lubricated in order to ensure longer life.

If the mechanic suspects that the sway bar has gone bad, the mechanic will begin by examining the sway bar bushings. If the entire sway bar appears to be in tact the bushing may cause the clunking noise. The mechanic will then replace the bushings and the sway bar if necessary.

If the mechanic suspects the tie rods, he or she will examine the tie rods for damage. If the tie rod end had become worn or loose, the mechanic will remove it and replace it with a new one. The mechanic will also ensure after installation, that the new tie rod end is properly lubricated.

In all repairs, the mechanic will make sure after completing the necessary repairs that the car handles properly. He or she should ask to test drive the vehicle to ensure this.

How important is this service?

Suspension and steering components that have gone bad will only get worse over time. If you notice that your car is not handling well or that it has started producing a clunking or knocking noise, you should have it inspected by a mechanic. Issues with suspension and steering components could also lead to other issues, like prematurely worn tires. Being vigilant about repairs to these components can help ensure long-life for your vehicle.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(286)

Rating Summary
275
10
1
0
0
275
10
1
0
0

Gary

35 years of experience
91 reviews
Gary
35 years of experience
GMC Yukon XL 1500 V8-5.3L - Clunking or knocking noise from wheels - Canton, Georgia
Gary was a God send! He arrived early, which was great!! He was very courteous, friendly and professional. Most of all, he took time to explain and show me the where the repairs would be needed. He performed a thorough inspection and gave me an excellent explanation of the work that needs to be done. I highly recommend Gary and look forward to him making the repairs! Thanks again, Gary!

Tyrone

11 years of experience
423 reviews
Tyrone
11 years of experience
GMC Yukon XL 1500 V8-6.0L - Water Pump - Cheltenham, Maryland
Mr Savoy was phenomenal! His knowledge was top notch. He was detailed & thorough in his workmanship. He did a fantastic job

Eliseo

12 years of experience
239 reviews
Eliseo
12 years of experience
GMC Yukon XL 1500 V8-5.3L - Brake Pads Replacement (Front) - Spring, Texas
On time and very professional. I recommend both Eliseo and Your Mechanic. A job well done at a fair price.

Matthew

11 years of experience
136 reviews
Matthew
11 years of experience
GMC Yukon XL 1500 V8-5.3L - Oil Pressure Sensor - Las Vegas, Nevada
Matthew was GREAT! Came in got the job done asap even while explaining to me what was going on! Will definitely be using Matt again!

Excellent Rating

(286)

Rating Summary
275
10
1
0
0
275
10
1
0
0
Number of GMC Yukon XL 1500 services completed
3146+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Heater
In In the dead of winter, when the cold air is nipping at your heels, nothing is better than climbing into a nice, toasty warm car. However, having a heater problem like a heater that blows cold air or leaks...
How Long Does a Low Water Sensor Last?
The The heat that is produced by your engine can be quite harmful if not cooled down. There are a variety of systems in your car that are designed to make sure that the internal temperature of your engine stays...
How to Get Rid of Windshield Streaking on Your Car
Windshield Windshield streaking is not only annoying, it can actually build up a real visual obstruction when driving. Before throwing in the towel and having the streaks professionally cleaned, there are steps you can take to care for the window...

What does the information display tell you?

The information display on your dash gives you access to critical information. You can cycle through each readout and adjust some of these as well. Here’s what you need to know: Odometer: The odometer tells you how many miles the...

My temperature gauge goes up and down when driving. We just recently changed the thermostat. It even does it when the ac is off. I

Hi there. It is quite possible that the electrical harness to the thermostat is faulty or you have an obstruction of coolant inside the radiator or cooling system that is causing an actual temperature flux as you are describing. It...

P2101 code but i just replaced PCM and throttle body im stumped. What else could i do to fix this dreaded red lightening bolt/ limp mode

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com