GMC V3500 Engine oil is black and gritty Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(2,982)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(2,982)

Engine oil is black and gritty Inspection Service

How much does a Engine oil is black and gritty Inspection cost?

On average, the cost for a GMC V3500 Engine oil is black and gritty Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 GMC V3500V8-5.7LService typeEngine oil is black and gritty InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1989 GMC V3500V8-6.2L DieselService typeEngine oil is black and gritty InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1989 GMC V3500V8-7.4LService typeEngine oil is black and gritty InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1987 GMC V3500V8-5.7LService typeEngine oil is black and gritty InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1988 GMC V3500V8-6.2L DieselService typeEngine oil is black and gritty InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1990 GMC V3500V8-6.2L DieselService typeEngine oil is black and gritty InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1988 GMC V3500V8-7.4LService typeEngine oil is black and gritty InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1991 GMC V3500V8-6.2L DieselService typeEngine oil is black and gritty InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example GMC V3500 Engine oil is black and gritty Inspection prices

Car engines need oil to operate smoothly and efficiently. Engine oil helps lubricate the dozens of moving and interacting parts, helps prevent rust and corrosion as well as aiding in removing the heat that an engine generates. Modern oil also helps keep an engine clean by removing sludge and build-up. An engine without oil simply will not function.

Brand new engine oil is a lovely amber color but over time it will turn black and in some cases will get gritty. Fortunately, this is usually not a problem, it is simply a result of the oil doing the job it was designed to do.

How this system works:

The primary function of engine oil is to lubricate the various moving parts of an engine. The constant contact between these moving parts generates both heat and wear and tear. Engine oil keeps friction to a minimum and dissipates the heat.

Engine oil is stored in the oil pan. The pan holds between 4 and 6 quarts of oil. When an engine is started, an oil pump sucks the oil from the pan through the pickup tube. The oil then travels to the oil filter, which removes any dirt and debris that has accumulated in it and then sends the oil into the engine via spurt holes. The oil moves through the engine and eventually makes it way back to the oil pan where the process starts again.

Common reasons for this to happen:

  • Normal Wear and Tear: Regardless of how often oil is changed, eventually it becomes black and slightly gritty. This simply means it is doing its job. Modern detergent engine oils which have detergent additives are designed to disperse the tiny particles or engine sludge and hold them in suspension in the oil so they do not build up on engine parts.

This will make the oil darker in color, and slightly gritty but it’s better for the build up to be trapped in the oil then building up on the vehicles engine parts. Oil can only hold so much sludge and eventually it will need to be replaced.

  • Dirty Oil Filter: An oil filter’s primary function is to filter out contaminants in the oil that it picks up while cycling through the engine. Over time an oil filter will become full and will need to be replaced. If it is unable to filter the oil the contaminants will remain in the oil and possibly damage the engine.

  • Overdue for an Oil Change: Oil needs to be changed on a regular basis. While oil turning black and getting slightly gritty is normal, extremely black oil that develops globs on the dipstick needs to be changed immediately. The interval between oil changes will vary depending on the type of oil being used but it is a good idea to follow the manufacturers recommendations.

While 3,000 miles used to be the recommendation, most modern oils, especially synthetics can go between 7,000-10,000 before an oil change is needed.

  • Oil Light Comes On: In most vehicles, if the Oil Warning light comes on, it is reason for immediate concern. In most cases this will indicate a low oil pressure situation, which could be the result of a failing oil pump or a leak. This can do severe damage to the engine. The vehicle should be inspected and repaired immediately.

  • Oil Level is Dropping: If the vehicle is consistently low on oil or the level is dropping sharply over a short period of time, there is probably an oil leak somewhere in the system. An oil leak can lead to a dangerously low amount of oil in the car and should be repaired immediately.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the Oil is Black and Gritty issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic look for normal wear and tear of the engine oil, along with the oil filter, oil level and other indications that will help determine if any problem exists or if additional procedures are required in order to provide you with an accurate diagnosis.

How important is this service?

In most cases black and gritty engine oil is normal. Engine oil should be changed on a regular basis according to the manufacturers recommendations. Going too long between oil changes can affect the performance of the engine and lead to expensive repairs.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(2,982)

Rating Summary
2,822
79
21
10
50
2,822
79
21
10
50

Harish

27 years of experience
588 reviews
Harish
27 years of experience
GMC Envoy L6-4.2L - Brake Pads Replacement (Front) - Charlotte, North Carolina
great guy knows his stuff

Jeremy

20 years of experience
630 reviews
Jeremy
20 years of experience
GMC Envoy XL L6-4.2L - AC is not working - West Palm Beach, Florida
Jeremy was very informative as well as knowledgeable about my concerns. Have me great information concerning my options.

Doug

34 years of experience
139 reviews
Doug
34 years of experience
GMC Yukon XL 1500 V8-6.2L - Starter - Corona, California
Doug was excellent

Richard

11 years of experience
265 reviews
Richard
11 years of experience
GMC Yukon XL 1500 V8-5.3L - Serpentine/Drive Belt - Nashville, Tennessee
On time, knowledgeable and dependable. Everything you want on a mechanic!

Excellent Rating

(2,982)

Rating Summary
2,822
79
21
10
50
2,822
79
21
10
50
Number of GMC services completed
32802+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

How to Prepare for the Oklahoma Driver’s Written Test
You You have quite a few things to do before you can take your road test and get your license in Oklahoma. Namely, you need to take and pass the written test so you can get your permit and actually...
P0515 OBD-II Trouble Code: Battery Temperature Sensor Circuit
P0515 trouble code means there is an issue with the battery temperature sensor circuit often caused by battery corrosion or engine overheating.
How to Replace an Anti-Lock Brake System (ABS) Fuse or Relay on Most Cars
Anti-lock brake systems have a fuse that fails if the ABS brake light is on or when the fuse is blown. The wheels may lock up if the ABS fuse is bad.

Key not starting car

Another key could be used to see if the lock cylinder will turn completely. Chances are either the lock cylinder itself or the lock cylinder housing is at fault. The may both need to be replaced (https://www.yourmechanic.com/services/ignition-lock-cylinder-replacement) to restore ignition...

Car will start and run smoothly but will die when you try to accelerate.

Hi there. There may be a misfire on a cylinder that is causing the engine to hesitate on acceleration. Check all of the spark plugs and wires and see if they have burn marks. If there is burn marks on...

I'm losing power steering after replacing rack and pump

First you need to see that the fluid level is correct. (https://www.yourmechanic.com/article/how-to-check-your-power-steering-fluid-level-by-jerel-lawrence) Bring the engine up to operating temperature and check the fluid at the reservoir. Top it up with Pentosin CHF11 hydraulic fluid. The fluid gets foamy when it...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com