GMC V1500 Suburban Clunking or knocking noise from wheels Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(6)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(6)

Clunking or knocking noise from wheels Inspection Service

How much does a Clunking or knocking noise from wheels Inspection cost?

On average, the cost for a GMC V1500 Suburban Clunking or knocking noise from wheels Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1988 GMC V1500 SuburbanV8-5.7LService typeClunking or knocking noise from wheels InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1990 GMC V1500 SuburbanV8-6.2L DieselService typeClunking or knocking noise from wheels InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1991 GMC V1500 SuburbanV8-6.2L DieselService typeClunking or knocking noise from wheels InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1988 GMC V1500 SuburbanV8-6.2L DieselService typeClunking or knocking noise from wheels InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1989 GMC V1500 SuburbanV8-6.2L DieselService typeClunking or knocking noise from wheels InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1989 GMC V1500 SuburbanV8-5.7LService typeClunking or knocking noise from wheels InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1991 GMC V1500 SuburbanV8-5.7LService typeClunking or knocking noise from wheels InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1987 GMC V1500 SuburbanV8-6.2L DieselService typeClunking or knocking noise from wheels InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example GMC V1500 Suburban Clunking or knocking noise from wheels Inspection prices

Clunking or knocking noises can be very disconcerting for any driver to hear while they are going down the road. While these noises may be a symptom of some different issues, all are usually related to a suspension component that has failed. When a suspension component has failed, the ride or the vehicle may be altered. If the failed component is not dealt with, it can lead to increasingly difficult and dangerous problems.

How this system works:

Your vehicle’s suspension system is designed to minimize friction between the tires and the road, ensuring a comfortable ride for you and your passengers. Many of the components that may cause a clunking or knocking noise are not only a part of the suspension, but help control the steering of the vehicle. Any issues regarding the steering or suspension of the vehicle should be looked at by a mechanic as they will only become worse over time.

Common reasons for this to happen:

  • Bad Ball Joints: Ball joints connect the vehicle’s wheel hubs to the rest of the suspension components. Depending on the vehicle, one or two ball joints per wheel and may or may not be load bearing. If a ball joint is beginning to fail, you may notice a clunking noise coming from the front wheels. This clunking noise will become louder and more frequent over time. You may also notice that your steering has been affected by the bad ball joint, potentially causing vibration in the steering wheel.

  • Bad Sway Bar Link: A vehicle’s sway bar or anti-roll bar, helps reduce body roll while cornering. Sway bars can help keep a vehicle from rolling over when going around a sharp corner. If the sway bar breaks or is damaged it may produce a clunking or knocking sound, especially when going over bumps. Your vehicle may also had more difficulty handling when the sway bar is damaged.

  • Bad Tie Rods: Tie rods connect a vehicle’s steering rack to the steering arm. This helps translate the turning of the steering wheel to the direction of the tires. When a tie rod end is worn or loose, they may produce a clunking noise. Worn tie rod ends may also cause more play in the steering wheel, making turning more vague.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason for the clunking or knocking noise from the wheels. The mechanic will then provide a detailed inspection report outlining the reason for the noise and the cost of any repairs that need to be made.

How it's done:

Telling a mechanic about any unusual sensations, in addition to the clunking or knocking noise, you may have observed, will help him or her understand what went wrong with the vehicle.

The mechanic will begin by lifting the front of the vehicle off the ground and shaking the front tires to check for play. If there is play in the front tires, the mechanic will suspect bad ball joints. The mechanic will then remove the wheel and the control arm(s) in order to access the faulty ball joint. He or she will then remove the old ball joint and replace it with a new one. The mechanic should also ensure that the new ball joint is properly lubricated in order to ensure longer life.

If the mechanic suspects that the sway bar has gone bad, the mechanic will begin by examining the sway bar bushings. If the entire sway bar appears to be in tact the bushing may cause the clunking noise. The mechanic will then replace the bushings and the sway bar if necessary.

If the mechanic suspects the tie rods, he or she will examine the tie rods for damage. If the tie rod end had become worn or loose, the mechanic will remove it and replace it with a new one. The mechanic will also ensure after installation, that the new tie rod end is properly lubricated.

In all repairs, the mechanic will make sure after completing the necessary repairs that the car handles properly. He or she should ask to test drive the vehicle to ensure this.

How important is this service?

Suspension and steering components that have gone bad will only get worse over time. If you notice that your car is not handling well or that it has started producing a clunking or knocking noise, you should have it inspected by a mechanic. Issues with suspension and steering components could also lead to other issues, like prematurely worn tires. Being vigilant about repairs to these components can help ensure long-life for your vehicle.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0

Nolan

30 years of experience
209 reviews
Nolan
30 years of experience
GMC V1500 Suburban V8-5.7L - Power Steering Pump - Tucson, Arizona
Did a great clean up job from previous mechanic sent out. Thank you Nolan. Works great

Richard

20 years of experience
126 reviews
Richard
20 years of experience
GMC V1500 Suburban V8-5.7L - Car is shaking or vibrating - Haltom City, Texas
Very professional seem honest.

Benji

22 years of experience
277 reviews
Benji
22 years of experience
GMC Terrain V6-3.0L - Clunking or knocking noise from wheels - Gilbert, Arizona
Extremely professional and knowledgeable. Highly recommend

Taoufik

5 years of experience
36 reviews
Taoufik
5 years of experience
GMC C1500 V6-4.3L - Clunking or knocking noise from wheels - Raleigh, North Carolina
Professional

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0
Number of GMC Clunking or knocking noise from wheels Inspection services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

P2009 OBD-II Trouble Code: Intake Manifold Runner Control Circuit Low Bank 1
P2009 trouble code definition P2009 is a general OBD2 diagnostic trouble code indicating a fault within the intake manifold runner control circuit....
How to Get a Nebraska Driver's Permit
The The state of Nebraska has a detailed graduated driver’s license program that requires all teen drivers to participate, in order to drive legally. To receive any of the different learner’s permits, you must follow certain steps. Here is a...
How to Advertise Your Used Car With a Window Display
To To have more success when trying to sell your vehicle (https://www.yourmechanic.com/article/how-to-be-successful-when-selling-a-car-by-jason-unrau) it is necessary to advertise it even when you are on the go. In addition to cleaning your vehicle and making sure it looks its best, displaying for-sale...

Smoke from the hood - 1996 Ford Mustang

Hello there. You will need to see if the engine valve covers are leaking oil and running back on the exhaust or if the transmission is leaking oil onto the exhaust near the dipstick tube where it goes in the...

Car makes clicking noise frequently.

Check the engine oil level. If low, that will contribute to engine noise such as ticking. The noise may be coming from the valve train and if so could be a consequence of the high miles on the engine. This...

Transmission gears

You may have a broken transfer case and should have the system tested and see if the problem is in transfer case or the transmission.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com