GMC Sierra 3500 Classic Uneven tire wear Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(3,262)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(3,262)

Uneven tire wear Inspection Service

How much does a Uneven tire wear Inspection cost?

On average, the cost for a GMC Sierra 3500 Classic Uneven tire wear Inspection is $105 with $0 for parts and $105 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 GMC Sierra 3500 ClassicV8-6.6L Turbo DieselService typeUneven tire wear InspectionEstimate$124.99Shop/Dealer Price$133.39 - $139.69
2007 GMC Sierra 3500 ClassicV8-6.0LService typeUneven tire wear InspectionEstimate$124.99Shop/Dealer Price$129.77 - $133.36
2007 GMC Sierra 3500 ClassicV8-8.1LService typeUneven tire wear InspectionEstimate$124.99Shop/Dealer Price$129.80 - $133.40
Show example GMC Sierra 3500 Classic Uneven tire wear Inspection prices

Over time all tires will wear down and need to be replaced. But while this is an eventuality for all vehicles, there are things a driver can do to help increase the life of their tires. Wear patterns on tires can reveal a lot about how the vehicle rides and if any adjustments need to be made. Being able to identify wear on the tires can help you and the mechanic make the appropriate changes.

How this system works:

When you purchase a new or certified used vehicle from a dealership, it should come with four matching tires, each inflated to the correct psi (pounds per square inch). Over time the tread on each tire will begin to wear and need to be changed. When a tire needs to be changed, it is possible that all will need to be changed. Replacing a single tire with a different brand or different size tire may throw off the balance of the vehicle. A mechanic can advise you on when to change your tires and how it should be done.

Common reasons for this to happen:

  • Tire Over/under inflation: Every tire has a recommended psi inscribed on the side of tire, indicating how much air should be put in. Over or under inflating the tire will cause the tire to wear unevenly. An over-inflated tire will wear more quickly around the middle of the tire. An under-inflated tire will wear more quickly on the edges. You mechanic will be able to show you where the recommended psi number is located.

  • Car is out of alignment: New cars are aligned by the manufacturer in a certain way to help maintain efficiency, and increase the life of the tires. In a vehicle that has come out of alignment, the tires are not facing perfectly straight and the vehicle must work harder to travel in a straight line. You can notice if you vehicle is out of alignment if it pulls either left or right, the steering wheel is at an angle while driving straight, and the tires are wearing down unevenly.

  • Tires are not rotated: In vehicles where the engine is at the front, the front tires bear more weight than the ones in the rear. In addition to this weight, they are also responsible for braking and turning. It is recommended that you rotate tires from front to back and side to side to ensure even wear. Tires that have not been rotated will show increased signs of wear at the front tires and decreased wear at the back.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason why your vehicle’s tire have worn unevenly. The mechanic will then provide a detailed inspection report outlining the nature of the tire wear and the cost of any repairs that need to be made.

How it's done:

A mechanic will first inspect the tires to determine the wear and get a better idea of what might have been going wrong. If the mechanic suspects that the tire is under or over inflated, he or she will use a tire pressure gauge to determine the exact pressure inside the tire. The mechanic will then compare that reading to the one on the outside of the tire. Depending on the measurement, the mechanic may have to inflate or let some air out of the tires. Wear in the center of the tire will most likely mean the mechanic will be letting out air, while wear on the edges mean the mechanic will most likely be adding air.

If the mechanic suspects that the vehicle is out of alignment, they will have to adjust suspension components that may have been affected by hitting a pothole or curb. Suspension components may also begin to fail over time, causing the vehicle to come out of alignment. While aligning your vehicle, the mechanic will also see if suspension components need to be replaced. The mechanic will adjust each side of the vehicle so that the tires are flat on the road and not at an angle.

If the wear on the tires is more significant at the front, the tires may need to be rotated. The mechanic will remove each tire and rotate it from front to back and side to side.

In all repairs the mechanic will also check the tread on the tires to make sure that they are still good. Tires that have low tread will not be as effective as new tires. When replacing tires, it is important to have tires of the same brand and size to ensure that they all wear evenly.

How important is this service?

As tire wear becomes worse, they will begin to lose gripping ability and need to be replaced. If you notice that your tires are wearing unevenly, especially in the event of a misalignment, you should have a mechanic look at your vehicle. Paying attention to signs like when the vehicle pulls left or right is an indicator that the vehicle needs to be aligned. Having tire wear examined and corrected can help increase the life of the tire, saving you time and money.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(3,262)

Rating Summary
3,088
87
22
11
54
3,088
87
22
11
54

Gabriel

14 years of experience
39 reviews
Gabriel
14 years of experience
GMC Sierra 3500 Classic V8-6.6L Turbo Diesel - Center Support Bearing - Colorado Springs, Colorado
Great service! Made sure the job was done and done right!

Zackery

6 years of experience
52 reviews
Zackery
6 years of experience
GMC Acadia V6-3.6L - Uneven tire wear - Snohomish, Washington
Zackery was very professional. Did a thorough inspection. Took his time. Very satisfied!

Brandon

19 years of experience
275 reviews
Brandon
19 years of experience
GMC Yukon V8-5.3L - Oil Pressure Sensor - Alpharetta, Georgia
A+++. From now on I will try to only book an appointment when Brandon is available. He is the best of the best and I highly recommend him.

Patrick

16 years of experience
406 reviews
Patrick
16 years of experience
GMC Sierra 1500 V8-5.3L - Pre-purchase Car Inspection - Anaheim, California
I really like the way he explains the issues. Will use him again.

Excellent Rating

(3,262)

Rating Summary
3,088
87
22
11
54
3,088
87
22
11
54
Number of GMC services completed
35882+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

What are the Car Pool Rules in Indiana?
Indiana Indiana has some of the prettiest rural (https://www.yourmechanic.com/article/top-10-scenic-drives-in-indiana) roads in the country, but it also has a fair share of large freeways, which help the state’s residents commute to and from work, go to school and run errands, and...
P2127 OBD-II Trouble Code: Throttle/Pedal Position Sensor/Switch 'E' Circuit Low
P2127 code definition The P2127 code is a generic OBD-II diagnostic trouble code indicating a fault with the throttle or pedal position...
P2264 OBD-II Trouble Code: Water in Fuel Sensor Circuit
P2264 P2264 code definition Water in Fuel Sensor Circuit What the P2264 code means P2264 is an OBD-II generic code for the engine control module (ECM) detecting the water in fuel sensor circuit voltage falling below or exceeding the specified...

Carburetor problem

The carburetor needs a good supply of fuel to keep the engine running; if the fuel pump is not suppling the fuel, or the filter is clogged solid, then fuel cannot get to the carburetor. If fuel is getting to...

Washer fluid in coolant

Hello. Just a little washer fluid in your coolant system should not have any harmful effects, but it will be a good idea to flush the coolant system to keep the coolant in optimum condition and it is a great...

Top radiator hose burst now car wont start

For whatever reason, it sounds like the battery is dead. .You will need to have your battery replaced and your charging system checked. I don't know if this has anything to do with the hose breakage, perhaps the technician who...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com