GMC Sierra 3500 Classic Electronic Control Relay Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(3,013)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(3,013)

Electronic Control Relay Replacement Service

How much does a Electronic Control Relay Replacement cost?

On average, the cost for a GMC Sierra 3500 Classic Electronic Control Relay Replacement is $141 with $46 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 GMC Sierra 3500 ClassicV8-6.0LService typeElectronic Control Relay ReplacementEstimate$207.35Shop/Dealer Price$240.44 - $317.21
2007 GMC Sierra 3500 ClassicV8-8.1LService typeElectronic Control Relay ReplacementEstimate$187.35Shop/Dealer Price$220.46 - $297.24
2007 GMC Sierra 3500 ClassicV8-6.6L Turbo DieselService typeElectronic Control Relay ReplacementEstimate$187.35Shop/Dealer Price$220.46 - $297.24
Show example GMC Sierra 3500 Classic Electronic Control Relay Replacement prices

What is the Electronic Control Relay all about?

A wide range of electronic systems must work properly in order for the vehicle to operate. That means there is a need for several different controllers to ensure proper operation. One of the most important is the electronic control relay. You might be more familiar with the term “main relay” because of its role in vehicle performance.

The electronic control relay operates the fuel pump and sends power to the engine’s injectors. Without the main relay, fuel will not flow from the tank to the engine, and your injectors will not atomize gasoline into the combustion chamber. In short, your car wouldn’t run. Electronic control relays are subject to failure from a number of different problems, including outright failure, heat damage, cracked solder and more.

Keep in mind:

  • The electronic control relay may not operate, or may operate intermittently depending on the source of the trouble.
  • A number of other problems can masquerade as a main relay failure, so it’s vital that you have one of our expert mechanics diagnose the issue.

How it's done:

  • The electronic control relay is located and accessed then verified it needs replaced
  • The defective relay is removed from the vehicle
  • The new electronic relay is installed
  • The components that the electronic relay operates are checked for proper operation
  • The vehicle is road tested for proper operation

Our recommendation:

Traditional turnkey ignition the relay will click three times during the starting process. If you listen closely, you should hear a single click when you turn the ignition to “on”. You should hear another when the Check Engine light turns off. Finally, there should be a third click when you turn the key to the “start” position. If you do not hear a click at any of these three points, there may be a problem with the electronic control relay. Have one of our expert mechanics diagnose and replace the relay if required.

What common symptoms indicate you may need to replace the Electronic Control Relay?

  • Engine doesn’t start, especially in cold weather
  • Engine may not start a few minutes after turning it off
  • No sound from the fuel pump when the ignition key is turned to “On”

How important is this service?

Given the fact that the electronic control relay powers the fuel pump and your fuel injectors, it is essential to replace a faulty one. However, many other problems can present similar symptoms, so it’s very important to have the issue diagnosed by one of our expert mechanics.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(3,013)

Rating Summary
2,853
79
21
10
50
2,853
79
21
10
50

Gabriel

13 years of experience
39 reviews
Gabriel
13 years of experience
GMC Sierra 3500 Classic V8-6.6L Turbo Diesel - Center Support Bearing - Colorado Springs, Colorado
Great service! Made sure the job was done and done right!

Matthew

33 years of experience
1279 reviews
Matthew
33 years of experience
GMC Sierra 1500 V8-5.3L - Oil Change - Newport News, Virginia
Great experience as always.

James

8 years of experience
128 reviews
James
8 years of experience
GMC Envoy L6-4.2L - Brake Pads Replacement (Front) - Fayetteville, Georgia
Great Job! Gave a detailed explanation on each part that was to be replaced on my vehicle. I was highly impressed.

Tyler

12 years of experience
22 reviews
Tyler
12 years of experience
GMC Envoy L6-4.2L - Power steering fluid is leaking - Chicago, Illinois
Very good

Excellent Rating

(3,013)

Rating Summary
2,853
79
21
10
50
2,853
79
21
10
50
Number of GMC services completed
33143+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

Disabled Driving Laws and Permits in Iowa
Driver Driver disability laws vary by state. It is important that you know the rules and regulations not only for the state in which you live, but also for states that you might visit or travel through. How do I...
How to Get Subaru Dealership Certified
Subaru car dealerships offer automotive technician jobs to mechanics who are Subaru certified through the ASE program .
How to Become a Certified Mobile Vehicle Inspector (State Car Inspector Certified) in Missouri
Automotive technician jobs include mobile vehicle inspectors. Learn how to do car checks through Missouri State Highway Patrol.

Spongy brakes after replacing rear discs, pads and refurbing rear calipers. Bled so many times to no avail!

All four wheels have to be bled starting with the right rear, then left rear, right front, and left front. Inasmuch as air may be trapped as much as 10 feet from the bleeder screw, you have to have a...

What rear end will direct swap with a C200 rear end?

Hello and thank you for contacting YourMechanic. You can put any Nissan or Toyota axle on the vehicle. If you use a different rear axle, you will need to switch the yoke to match the drive shaft and you may...

I have a 2011 GMC Terrain, it burns oil. Last week it was running rough, idoling rough, and wanting to die when I would let it idol too long without giving it any gas, and after driving it to work the check [engine](/topics-engine-chevy/) light came on. I read a lot of things on the subject online and everyone recommended NO SMOKE STOP LEAK, I went to autozone and got the codes checked, it said it was a random misfire, I added two quarts of oil and a little bit of the no smoke and it ran perfectly, it was like new. That was last Tuesday. Today it was running kind of weird on the way to work, when it was in first gear and I would give it gas, it would bog down and drop RPM and i would release the gas and then it would drive into second gear and work its way up and would run fine after the first gear transfer. I get to work and it dies when I pull into my parking spot before I can put it into park. I turn it back on and the check engine light is flashing and the stabilitrak light is flashing and its shaking violently. I shut it off and check the oil, there is no oil on the dipstick, I add two quarts because thats all I had on me, and i add another thick drop of the no smoke stop leak into the oil, and turn it back on and its still flashing check engine light and service stabilitrak and its very shaky still. I took it to a mechanic down the street from where I work but have not heard anything back from then yet. What are your thoughts?

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com