GMC Sierra 1500 HD Classic Coolant Reservoir Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(2,948)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(2,948)

Coolant Reservoir Replacement Service

How much does a Coolant Reservoir Replacement cost?

On average, the cost for a GMC Sierra 1500 HD Classic Coolant Reservoir Replacement is $230 with $135 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 GMC Sierra 1500 HD ClassicV8-6.0LService typeCoolant Reservoir ReplacementEstimate$385.65Shop/Dealer Price$463.32 - $673.81
Show example GMC Sierra 1500 HD Classic Coolant Reservoir Replacement prices

What is the Coolant Reservoir all about?

Cooling systems on vehicles are meant to remove heat from critical engine components. The fluid or coolant that circulates through the system carries the heat out of the engine to the radiator, where air flow dissipates the heat it contains. A natural reaction to the heat which the fluid experiences is expansion. If the fluid in the cooling system is at the full mark when the engine is cold, the volume will be greater when the fluid is hot due to expansion. Because the cooling system is closed and pressurized when hot, the excess hot coolant needs to go somewhere. It is pushed into a surge tank, or an overflow tank, where it remains until the engine cools down. When the engine cools, the contraction from the fluid still in the system creates a vacuum and the surge tank’s hose draws the coolant back into the system. If the coolant surge tank is cracked or broken, the coolant will leak onto the ground. An airlock will form in the cooling system when the surge tank hose only draws in air instead of coolant.

Keep in mind:

  • Engine coolant is extremely hot when the engine is at operating temperature. Never open the cooling system when the engine is hot.
  • The surge tank should be flushed when the coolant is being changed out.

How it's done:

  • The coolant is drained into a suitable container and the coolant recovery reservoir cap is removed.

  • The old coolant recovery reservoir is disconnected from all of the hoses hoses and pulled free of the vehicle.

  • The new coolant recovery reservoir is installed into the vehicle and secured. The coolant hoses are installed and secured using new clamps.

  • The coolant is refilled and purged of air as per manufacturer recommendation.

  • The vehicle coolant recovery reservoir is checked for leaks and proper operation.

Our recommendation:

The surge tank itself should never need attention unless it is damaged or broken. Excess engine heat may also warp the container, though it is not common. If your coolant surge tank is broken or leaking, have one of our expert mechanics replace it.

What common symptoms indicate you may need to replace the Coolant Reservoir?

  • Coolant leaking onto the ground when engine is hot.
  • Engine overheats due to an airlock.

How important is this service?

The surge tank is part of the cooling system. It may seem to be auxiliary, but it is essential to proper operation. If the surge tank leaks coolant out, an airlock will form in the engine and it could overheat, causing damage. If your surge tank is broken, have it replaced as soon as possible to prevent further issues.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(2,948)

Rating Summary
2,788
79
21
10
50
2,788
79
21
10
50

Khoa

20 years of experience
402 reviews
Khoa
20 years of experience
GMC Yukon V8-6.0L - Coolant Reservoir - Sacramento, California
Great job , thank you again!

Gustavo

17 years of experience
410 reviews
Gustavo
17 years of experience
GMC Yukon V8-5.3L - Car is not shifting into park - Universal City, Texas
Gustavo was great! Told me what was wrong with my vehicle, then quoted me a reasonable price.

Luke

16 years of experience
138 reviews
Luke
16 years of experience
GMC Savana 3500 V8-6.0L - Oxygen Sensor Replacement (Front/Upper/Upstream, Rear/Lower/Downstream) - Eureka, Missouri
Thanks so very much............ you fixed the problem on the van and with the other stuff! Awesome and great service. Will use again!

Kevin

24 years of experience
536 reviews
Kevin
24 years of experience
GMC Sierra 1500 V8-6.2L - Exterior Door Handle Replacement (Passenger Side Front) - Lawrenceville, Georgia
Showed up on time and was very efficient with the repair of an exterior door handle.

Excellent Rating

(2,948)

Rating Summary
2,788
79
21
10
50
2,788
79
21
10
50
Number of GMC services completed
32428+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Front Output Shaft Oil Seal
If your car has all- or four-wheel drive and there is noise or fluid leaking from the transfer case, consider replacing the front output shaft seal.
P0173 OBD-II Trouble Code: Fuel Trim Malfunction (Bank 2)
P0173 P0173 code definition? P0173 Fuel Trim Malfunction (Bank 2) What the P0173 code means Code P0173 is triggered by the engine control module (ECM) when it detects that the air-fuel ratio is too lean or too rich. For most...
How to Replace a Windshield Washer Reservoir
Car windshield washer reservoirs hold washer fluid for cleaning the windshield. If the reservoir is dry it can crack or break and need to be replaced.

How do I adjust the brightness of the instrument panel in a 2012 Ford F-150?

The Instrument Panel is a place for you to monitor and adjust your vehicle’s performance. The brightness of this panel can be dimmed or brightened to meet your needs. To adjust the brightness. Press the Left and Right control buttons...

Sounds and noises issuing from car.

The noise and smoke is most likely coming from the AC compressor and pulley. The compressor assembly, drier filter, and possibly the condenser would need to be replaced. Also the belts should be replaced. I would recommend having a mechanic,...

Low oil pressure light came on car cut off won't start anymore

When the engine is running, oil is pumped throughout to lubricate and cool all of the places where metal slides against metal. If the engine runs low on oil, or if something goes wrong with the pump or oiling system,...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com