GMC Sierra 1500 HD Classic Ambient Temperature Sensor (Switch) Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(3,002)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(3,002)

Ambient Temperature Sensor (Switch) Replacement Service

How much does a Ambient Temperature Sensor (Switch) Replacement cost?

On average, the cost for a GMC Sierra 1500 HD Classic Ambient Temperature Sensor (Switch) Replacement is $105 with $10 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 GMC Sierra 1500 HD ClassicV8-6.0LService typeAmbient Temperature Sensor (Switch) ReplacementEstimate$134.97Shop/Dealer Price$149.97 - $172.45
Show example GMC Sierra 1500 HD Classic Ambient Temperature Sensor (Switch) Replacement prices

What is the Ambient Temperature Sensor (Switch) all about?

Modern automotive HVAC systems have advanced by leaps and bounds over those used just a few years ago. Today, many high and even mid-range cars offer automatic climate control. This function basically allows you to “set it and forget it,” allowing the car’s computer to control the heating and cooling based on your preferred interior temperature. In order to do this, the computer needs information about not only the temperature inside the car, but also the ambient temperature outside the car.

The ambient temperature sensor (switch) is located either behind the front grille or in the front bumper. Its only job is to monitor air temperature (which it does through increasing/decreasing resistance in response to temperature fluctuations). This information is transmitted to the car’s computer, which then adjusts the climate control to meet your specifications.

If the ambient temperature sensor is damaged or fails, the car’s computer will not be able to automatically control the HVAC system, and the heater and air conditioner will only work in manual mode.

Keep in mind:

  • Because of its location, the ambient temperature sensor can be easily damaged in even minor front-end collisions.
  • Sensor failure is common even without an accident.

How it's done:

  • The ambient temperature sensor switch is verified to see if it needs to be replaced
  • The defective ambient temperature sensor switch is removed
  • The new ambient temperature sensor switch is installed
  • The ambient temperature sensor switch is tested for operation
  • The vehicle is tested to ensure proper operation of the ambient temperature sensor switch

Our recommendation:

Without the information provided by the ambient temperature sensor, your car’s computer does not have sufficient data to control the interior temperature, and will revert to manual HVAC control. You’ll still be able to use your air conditioner and heater, but only in manual mode, not in auto. If you suspect a problem with the ambient temperature sensor, have it diagnosed by one of our expert mechanics and replaced if necessary.

What common symptoms indicate you may need to replace the Ambient Temperature Sensor (Switch)?

  • HVAC auto mode will not work
  • HVAC auto mode produces delivers inconsistent/incorrect operation
  • HVAC will only work in manual mode
  • Outside temperatures may display incorrectly

How important is this service?

Having automatic climate control is definitely a convenience, but not critical to the operation of your vehicle. The heater will still operate to clear the windows and provide heating and cooling on manual mode. If the ambient temperature sensor is faulty, have it replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(3,002)

Rating Summary
2,842
79
21
10
50
2,842
79
21
10
50

Dan

39 years of experience
1002 reviews
Dan
39 years of experience
GMC Yukon V8-5.3L - Ambient Temperature Sensor (Switch) - Cumming, Georgia
Dan arrived on time and did an excellent job. I would definitely use him again.

Jerome

24 years of experience
415 reviews
Jerome
24 years of experience
GMC Acadia V6-3.6L - Ambient Temperature Sensor (Switch) Replacement - Dundalk, Maryland
Jerome was pleasant and knowledgeable . I would recommend him to friends.

Juan

29 years of experience
70 reviews
Juan
29 years of experience
GMC Acadia V6-3.6L - Smoke from engine or exhaust - Los Angeles, California
Juan is a great mechanic, and very honest too.

Thomas

12 years of experience
128 reviews
Thomas
12 years of experience
GMC Envoy L6-4.2L - Window Motor / Regulator Assembly Replacement (Driver Side Front) - Midlothian, Texas
Thomas was awesome. Very professional and courteous.

Excellent Rating

(3,002)

Rating Summary
2,842
79
21
10
50
2,842
79
21
10
50
Number of GMC services completed
33022+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

How to Register a Car in Virginia
There There are so many different things that have to be handled when moving to Virginia. Making sure that you take the steps needed to get a car registered in this state should be at the top of your list...
P0206 OBD-II Trouble Code: Injector Circuit Malfunction - Cylinder 6
P0206 code definition Injector Circuit Malfunction - Cylinder 6 What the P0206 code means When a P0206 code is seen, the Engine...
How to Replace Oil Cooler Lines on Most Cars
Oil cooler lines fail if there are bends in the hose, low oil levels, or oil visibly puddling underneath the car.

Problems with gear shifter.

Hi, most vehicles now a days have an electronic lock that releases when you step on the brake pedal. The lock is a safety feature that keeps the transmission from being put into gear accidentally. If the lock gets stuck...

Car failed emissions test

Hi, to fix this problem you will need to replace the intake manifold gaskets. That will take care of the Barometric Pressure Sensor. I would inspect the exhaust gas recirculation (EGR) valve, since it may have been left open causing...

My car makes a clunk noise when turning the wheel while parked

Normally, the noise you are describing is commonly seen with failed outer tie rods (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-tie-rod-end), failed CV axles (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-axle-cv-shaft-assembly), broken sway bar bushings (https://www.yourmechanic.com/services/stabilizer-bar-bushings-replacement) and the steering linkage itself. With the modification of the vehicle, it can change the operation...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com