GMC Sierra 1500 Classic Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(8)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(8)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a GMC Sierra 1500 Classic Power Steering Pump Replacement is $337 with $113 for parts and $224 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 GMC Sierra 1500 ClassicV8-4.8LService typePower Steering Pump ReplacementEstimate$473.74Shop/Dealer Price$535.94 - $709.56
2007 GMC Sierra 1500 ClassicV8-6.0LService typePower Steering Pump ReplacementEstimate$459.32Shop/Dealer Price$518.69 - $690.20
2007 GMC Sierra 1500 ClassicV8-5.3L HybridService typePower Steering Pump ReplacementEstimate$5203.68Shop/Dealer Price$6449.18 - $10178.99
2007 GMC Sierra 1500 ClassicV8-5.3LService typePower Steering Pump ReplacementEstimate$459.32Shop/Dealer Price$518.73 - $690.27
2007 GMC Sierra 1500 ClassicV6-4.3LService typePower Steering Pump ReplacementEstimate$459.32Shop/Dealer Price$521.09 - $694.39
Show example GMC Sierra 1500 Classic Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0

William

27 years of experience
65 reviews
William
27 years of experience
GMC Sierra 1500 Classic V8-4.8L - Oil/Fluid Leak - Pflugerville, Texas
He was very professional also explaining everything were I understood him what needs to be done

Philippe

8 years of experience
4 reviews
Philippe
8 years of experience
GMC Sierra 1500 Classic V8-5.3L - Car is not starting - Cherry Hill, New Jersey
Very helpful and knowledgeable

Peter

29 years of experience
592 reviews
Peter
29 years of experience
GMC Sierra 1500 Classic V6-4.3L - Oil Change - Newhall, California
Awesome job and experience!!! Peter was very professional and knowledgeable.

Chris

21 years of experience
448 reviews
Chris
21 years of experience
GMC Sierra 1500 Classic V8-4.8L - Brake System Flush - Portland, Oregon
Awsome and friendly.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0
Number of GMC Sierra 1500 Classic services completed
88+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

P0351 OBD-II Trouble Code: Ignition Coil "A" Primary/Secondary Circuit Malfunction
P0351 code definition P0351 is a general OBD2 diagnostic trouble code (DTC) that points to a fault with the ignition coil A....
How to Replace Your Car Idle Air Control Valve
The IAC valve, or idle air control valve, dictates your vehicle’s idle. A faulty valve can lead to rough idling and stalling, among other problems.
5 Things to Consider Before Becoming a Rideshare Driver
Becoming a rideshare driver may be an exciting career option. Consider the timing, cost, and benefits to driving for rideshare companies.

Loud bang and engine shuts off

Hello. If the dealership replaced the head, belt, and associated components, the vehicle should be safe to drive. Water pump failures are actually a common occurrence on that vehicle, due to the original water pump pulleys being manufactured out of...

Power steering light goes off randomly but turns of immediately

This is a common symptom of an electronic power steering system. In most cases, the sensors that monitor this system become clogged with dirt and debris and can cause the light to illuminate occasionally as you've described. However, if driving...

Dealership says water pump needs replacing

With regard to the dealership, or any mechanic for that matter, simply ask for the evidence substantiating the diagnosis and proposed repair. In the case of an alternator, once the drive belt is removed from the engine, and the engine...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com