GMC Savana 3500 Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(41)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(41)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a GMC Savana 3500 Power Steering Pressure Hose Replacement is $203 with $63 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2017 GMC Savana 3500V8-6.0LService typePower Steering Pressure Hose ReplacementEstimate$280.78Shop/Dealer Price$315.83 - $412.86
2009 GMC Savana 3500V8-6.6L Turbo DieselService typePower Steering Pressure Hose ReplacementEstimate$645.25Shop/Dealer Price$771.90 - $1147.72
2007 GMC Savana 3500V8-6.6L Turbo DieselService typePower Steering Pressure Hose ReplacementEstimate$645.25Shop/Dealer Price$771.92 - $1147.76
2010 GMC Savana 3500V8-4.8LService typePower Steering Pressure Hose ReplacementEstimate$361.45Shop/Dealer Price$417.17 - $580.16
2016 GMC Savana 3500V8-4.8LService typePower Steering Pressure Hose ReplacementEstimate$271.77Shop/Dealer Price$306.55 - $403.38
2015 GMC Savana 3500V8-6.6L Turbo DieselService typePower Steering Pressure Hose ReplacementEstimate$391.57Shop/Dealer Price$454.96 - $640.65
2013 GMC Savana 3500V8-6.6L Turbo DieselService typePower Steering Pressure Hose ReplacementEstimate$539.69Shop/Dealer Price$639.99 - $936.67
2002 GMC Savana 3500V8-6.5L Turbo DieselService typePower Steering Pressure Hose ReplacementEstimate$277.11Shop/Dealer Price$311.75 - $411.48
Show example GMC Savana 3500 Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(41)

Rating Summary
37
3
0
0
1
37
3
0
0
1

Ramon

8 years of experience
184 reviews
Ramon
8 years of experience
GMC Savana 3500 V8-4.8L - Power Steering Pressure Hose - Santa Monica, California
Ramon is the best

James

27 years of experience
184 reviews
James
27 years of experience
GMC Savana 3500 V8-5.7L - Power Steering Pressure Hose - Antioch, Tennessee
Very nice and profesional person

Nathan

22 years of experience
298 reviews
Nathan
22 years of experience
GMC Savana 3500 V8-6.0L - Electric Problems - Austin, Texas
He was very capable and knowledgeable.

Christopher

9 years of experience
120 reviews
Christopher
9 years of experience
GMC Savana 3500 V8-4.8L - Stabilizer Bar Bushings Replacement (Front) - Marietta, Georgia
great

Excellent Rating

(41)

Rating Summary
37
3
0
0
1
37
3
0
0
1
Number of GMC Savana 3500 services completed
451+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

How to Remove Gas from the Fuel Tank
It It is often necessary to drain the fuel from a car’s gas tank (https://www.yourmechanic.com/article/3-essential-things-to-know-about-your-car-s-gas-tank) in some of the following situations: If you run out of gas while far away from a gas station, you may want to siphon gas...
B1350 OBD-II Trouble Code: Heated Backlight Relay Short to Ground
B1350 means there is an error with the heated backlight relay, likely due it being defective, a faulty switch, or a blown fuse.
How to Get Mercedes-Benz Dealership Certified
Mercedes Benz dealerships offer automotive technician jobs to those certified through Mercedes-Benz's Automotive Systems Technical & ELITE programs.

Act like it runs out of gas but it doesn't

It sounds like you're having a fuel pressure issue. If you have a fuel pressure gauge, connect it to the shrader valve on the fuel line under hood and check the readings. It should be over 10psi if it has...

I have a parasitic drain of 150 milliamps from my alternator, is that normal?

The battery going dead (https://www.yourmechanic.com/services/battery-is-dead-inspection) in a couple of days is not normal and if you did the parasitic drain test correctly, then you are correct to condemn the alternator for the excessive draw. The alternator is most likely shorting...

Car RPM drops on AC, stalling the car.

Hi There, This may be a sign of a faulty MAP sensor as the vehicle responds adversely to a load put on the motor (i.e. putting it in gear, turning on AC or engaging the brakes). The Manifold Absolute Pressure...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com