GMC Safari Excessive wear on outer edges of tire Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(57)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(57)

Excessive wear on outer edges of tire Inspection Service

How much does a Excessive wear on outer edges of tire Inspection cost?

On average, the cost for a GMC Safari Excessive wear on outer edges of tire Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2001 GMC SafariV6-4.3LService typeExcessive wear on outer edges of tire InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2003 GMC SafariV6-4.3LService typeExcessive wear on outer edges of tire InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1986 GMC SafariL4-2.5LService typeExcessive wear on outer edges of tire InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1988 GMC SafariL4-2.5LService typeExcessive wear on outer edges of tire InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2000 GMC SafariV6-4.3LService typeExcessive wear on outer edges of tire InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1999 GMC SafariV6-4.3LService typeExcessive wear on outer edges of tire InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1996 GMC SafariV6-4.3LService typeExcessive wear on outer edges of tire InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1989 GMC SafariL4-2.5LService typeExcessive wear on outer edges of tire InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example GMC Safari Excessive wear on outer edges of tire Inspection prices

Abnormal wearing on the tread of your tires is always cause for concern. Abnormal wear suggests that your wheels are not set right with the road, and therefore your car is not driving correctly. Worn tires are also at a great risk of blowing, making your car less safe to drive. Excessive wear on the outer edge of a tire is no exception.

How this system works:

Your car is designed to have all four wheels contact the road at a specific angle. This is called alignment. Over time, and for various reasons, the angle of your wheels can alter, and they will need to be realigned. Realigning the wheels simply returns them to their optimal angle. This angle allows all four wheels to work in unison with each other and with the suspension system, and makes for better turning. It also helps increase the longevity of your tires.

Common reasons for this to happen:

Excessive wear on the outer edge of a tire is almost always because your wheels are not aligned. But even though misalignment causes abnormal wear, it may not be the root of the problem. Oftentimes the misalignment is caused by a more serious problem.

  • Standard misalignment: Over time, and with generic wear and tear, your wheels will slowly shift, so that they are no longer at an optimal angle with the road. This can also happen when your tires are changed or your wheels are rotated, if a mechanic did not do a perfect job. Altering the angle of your wheels means altering the center of gravity, and altering what part of the tire makes the most contact with the road. If a wheel is misaligned in one direction, it will experience excessive wear on the outer edge, while a misalignment in the other direction will wear out the inner edge.

  • Sagging springs: Springs help support and distribute the weight of the vehicle. By doing so, springs help hold the vehicle up at the right height. As springs wear and tear, they begin to sag, and are no longer able to support the full weight of the car. If you’ve ever noticed a car that appears lower to the ground than it should be, it’s likely that the springs were sagging. This lowered height and lack of weight support puts excess force on the wheels, which will often result in the wheels becoming misaligned.

  • Worn out ball joints or control arms: The ball joints and control arms are vital pieces of your suspension system. The control arms connect the suspension to the frame of the car, while the ball joints (which act very similarly to human joints), connect the control arms to the steering knuckles. Because the ball joints and control arms are so close to the wheels, their function has an impact on the wheels. If the ball joints or control arms fail (the control arm bushings are particularly susceptible), then your wheels will absorb too much force from the road, and may be jarred such that they become misaligned.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the cause of the excessive wear on the outer edges of the tires, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

A mechanic will thoroughly inspect your suspension, and your springs, to make sure that they locate the root of the excessive wear on the outer edge of your tires. If the problem lies with sagging springs, or broken control arms or ball joints, then those parts will need to be replaced before the vehicle is sent into a shop for a wheel alignment.

How important is this service?

Any service involving your tires is extremely important. Tires with excessive wear on the outer edge are more susceptible to blow out, and your car will not drive optimally. Furthermore, excessive outer wear suggests that there may be a larger, more severe problem with your vehicle, so you’ll went to get it inspected as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(57)

Rating Summary
52
1
1
1
2
52
1
1
1
2

Breck

20 years of experience
681 reviews
Breck
20 years of experience
GMC Safari V6-4.3L - Battery will not hold a charge - Houston, Texas
Good mechanic

TJ

26 years of experience
362 reviews
TJ
26 years of experience
GMC Safari V6-4.3L - Fuel Pump - Sarasota, Florida
Quality Service A++++

Peter

43 years of experience
1321 reviews
Peter
43 years of experience
GMC Safari V6-4.3L - Power Steering Pump - El Mirage, Arizona

Stacy

24 years of experience
366 reviews
Stacy
24 years of experience
GMC Safari V6-4.3L - Alternator - Lithonia, Georgia
Very good experience

Excellent Rating

(57)

Rating Summary
52
1
1
1
2
52
1
1
1
2
Number of GMC Safari services completed
627+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Buick LaCrosse eAssist
Buick Buick has entered the hybrid market in a big way with the 2012 Buick LaCrosse eAssist model. It has all of the same great looks and features that you would expect from a luxury sedan from Buick. However, the...
5 Essential Things to Know About Driving in Bad Weather
Knowing how to drive in bad weather will help you stay safe. Drive slowly, brake early, and prepare for black ice to drive safely in bad weather.
How to Put Racing Stripes on a Classic Car
Older Older cars or classic cars (https://www.yourmechanic.com/article/how-to-buy-restore-and-sell-a-vintage-car-by-jason-unrau) have a lot of appeal because they represent bygone eras. Fresh paint (https://www.yourmechanic.com/article/how-to-paint-a-car-yourself) is a great way to keep up the appearance of older vehicles, and a great way to show individual style....

Brake light stays on when car is off

The brake light switch or pedal linkage is likely causing the lights to stay on. I recommend having a mechanic, like one from YourMechanic, come to you to find the cause of the brake light staying on (https://www.yourmechanic.com/services/parking-brake-light-stays-on-inspection) and quote...

dash and parking lights flicker on and off after turning off the car

Hi there: I'ts very common for an ignition cylinder to go bad over time and cause inconsistent operation of multiple electrical components including dash and parking lights. The best way to determine whether it's the ignition cylinder or assembly, or...

When replacing the ecu, do I have to have it programmed upon installation?

The PCM will need to be programmed if you have theft system that is factory installed. The PCM will need to be programmed to communicate with the theft module.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com