GMC Jimmy Intake Manifold Gaskets Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(63)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(63)

Intake Manifold Gaskets Replacement Service

How much does a Intake Manifold Gaskets Replacement cost?

On average, the cost for a GMC Jimmy Intake Manifold Gaskets Replacement is $366 with $86 for parts and $280 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1992 GMC JimmyV6-4.3LService typeIntake Manifold Gaskets ReplacementEstimate$702.34Shop/Dealer Price$765.45 - $928.84
1999 GMC JimmyV6-4.3LService typeIntake Manifold Gaskets ReplacementEstimate$703.29Shop/Dealer Price$775.12 - $978.24
2005 GMC JimmyV6-4.3LService typeIntake Manifold Gaskets ReplacementEstimate$535.40Shop/Dealer Price$599.97 - $785.33
1990 GMC JimmyV8-5.7LService typeIntake Manifold Gaskets ReplacementEstimate$651.03Shop/Dealer Price$713.33 - $888.12
1990 GMC JimmyV8-6.2L DieselService typeIntake Manifold Gaskets ReplacementEstimate$554.14Shop/Dealer Price$613.07 - $771.89
1993 GMC JimmyV6-4.3LService typeIntake Manifold Gaskets ReplacementEstimate$649.95Shop/Dealer Price$708.94 - $872.42
1998 GMC JimmyV6-4.3LService typeIntake Manifold Gaskets ReplacementEstimate$703.29Shop/Dealer Price$775.24 - $978.45
1997 GMC JimmyV6-4.3LService typeIntake Manifold Gaskets ReplacementEstimate$703.29Shop/Dealer Price$775.19 - $978.36
Show example GMC Jimmy Intake Manifold Gaskets Replacement prices

What is an intake manifold gasket and how does it work?

The intake on an engine may be made up of a lower intake manifold and an upper intake manifold or plenum. The lower intake manifold is a cast aluminum or molded plastic chamber bolted to the cylinder head of the engine. The intake manifold must be tightly sealed to the cylinder head(s) using a gasket in order to prevent air, oil, or engine coolant leaks.

When to consider replacing the intake manifold gasket:

Internal or external leaks. Due to constant temperature expansion and contraction of engine parts or overheating, the gasket’s ability to seal properly can be ruined, resulting in problems such as:

  • Internal or external engine coolant leaks. In some applications, the manifold has cooling passages within. If the manifold seal to the engine fails, coolant can leak externally or even into the engine oil crankcase, where coolant can be noticed in the engine oil.
  • Engine overheating. If the leak at the manifold is a leak of engine coolant, it can lead to engine overheating. However, there are other causes of engine overheating, so a mechanic would have to determine the actual cause.
  • External oil leaks. On some 6 and 8 cylinder engines, the intake manifold sits atop an oil-lubricated area of the engine block. If the manifold gasket has failed, oil can leak from the block to the exterior of the engine.
  • Poor engine operation, lean operation, rough idle. Vacuum air leaks into the manifold due to a defective gasket that will upset the air-fuel ratio. The engine may run poorly.
  • Check engine light. Minor leaks at the intake manifold gasket will not usually cause the check engine light to illuminate. However, as a leak persists, it may grow larger and it possible for the leak to degrade engine performance enough that it will cause a trouble code to set, which will cause the check engine light to illuminate.

How do mechanics replace the intake manifold gasket?

  • Working on a cold engine, the engine cover is removed. If the intake manifold has internal cooling system passageways, the engine coolant is drained below the level of those passageways.
  • The accelerator cable assembly and cruise control cable are removed and set aside. All electrical connections and emission and vacuum lines in the way of the intake are removed. Ignition components, such as the coil, are removed as needed. If the car has an upper plenum, that is removed and set aside.
  • If the fuel rail is bolted to the intake manifold, the supply and return connections to the fuel rail are disconnected.
  • Once all connections to the manifold are clear, the manifold is unbolted and removed from the engine.
  • Aluminum and plastic manifolds are checked with a machinist’s straightedge to ensure the surface flatness does not exceed the original equipment manufacturer’s specification. If the surface of a manifold is not flat, the new gasket will not seal properly. Plastic manifolds are checked for cracks, heat damage, and warpage.
  • Once the manifold is deemed re-usable or replaced as needed, the new gasket is applied, the manifold is put in position and the mounting bolts are torqued with a calibrated torque wrench in the OEM specified sequence. In some applications, RTV sealant must be applied in corners of the mounting surface or specified hard-to-seal spots, per the service manual.
  • All removed components are then re-installed in the reverse of the above steps.
  • Finally, the vehicle is run and checked for leaks, and test driven.

Is it safe to drive with an intake manifold gasket problem?

Yes. The principal concern with a leaking intake manifold gasket is potential damage to the engine, depending on where the leak is. Although the vehicle will generally be safe to drive, you should schedule service as soon as possible to minimize the chances of additional costly damage. If the leak involves coolant, it could lead to engine overheating damage or the coolant could contaminate the engine oil, which can damage the engine bearings. If there is an air leak to the cylinders, it can cause lean operation which could overheat the catalytic converter.

When replacing the intake manifold gasket keep in mind:

  • In engines where coolant flows through the intake manifold, a leaking intake manifold gasket can be either the cause of or result of engine overheating. If you have a leaking intake manifold gasket, and the engine has overheated, the entire engine should be inspected for damage, such as a blown head gasket. The engine cooling system thermostat should be replaced because engine overheating can damage the cooling system thermostat.
  • Some car engine designs are more likely than others to experience leaking intake manifold gaskets due to material and design issues. Your mechanic can inform you if your car represents one of these cases. Many times a re-designed gasket, or altered installation technique and torque values, will be relevant to avoid a recurrence of any leaks. Mechanics will consult Technical Service Bulletins to determine if any unique circumstance exists for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(63)

Rating Summary
56
2
1
0
4
56
2
1
0
4

Stephen

33 years of experience
220 reviews
Stephen
33 years of experience
GMC Jimmy V6-4.3L - Intake Manifold Gaskets - Broomfield, Colorado
Stephen is extremely knowledgeable, thorough and very personable. He answered any and all questions I had during his visit. He made sure the work was complete in a very professional manner. I would welcome Stephen for any future repairs.

Matthew

18 years of experience
53 reviews
Matthew
18 years of experience
GMC Jimmy V6-4.3L - Car is not starting - Shawnee Mission, Kansas
Very helpful!! Found the problem is been missing in less the the scheduled time.

Jason

25 years of experience
57 reviews
Jason
25 years of experience
GMC Jimmy V6-4.3L - Oil Change - Edmond, Oklahoma
He was earlier than schedule he also got the job done fast and very friendly he is who i prefer to continue to do my work on my car he didn't tell me extra stuff that didn't need fix veryr honest with me being a female. He did not take advantage of me

Ruben

18 years of experience
169 reviews
Ruben
18 years of experience
GMC Jimmy V6-4.3L - Radiator - West Columbia, South Carolina
Ruben was on time, very professional and helpful with other recommendations. Very positive experience.

Excellent Rating

(63)

Rating Summary
56
2
1
0
4
56
2
1
0
4
Number of GMC Jimmy services completed
693+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

How to Buy a Car With Bad Credit
Obtaining Obtaining a car is rarely a quick and simple process, but for those with a poor credit score, getting behind the wheel can be nearly impossible. Bankruptcy, defaulted loans, unpaid credit cards, and many more details can act to...
Why Brake Caliper Replacements Can Be Tricky
Changing a brake caliper in the front or rear of a car can pose some challenges, as the proper tools and equipment are essential to perform the job.
Windshield Laws in Pennsylvania
Pennsylvania Pennsylvania has a variety of traffic laws that drivers are required to follow on the roadways. However, in addition to the road rules, motorists must also make sure their vehicles are in compliance with the following windshield laws when...

Truck shuddering at 45 to 50 MPH.

A shudder could be a problem with an ignition coil pack. On most cars they start to fail around 150,000 miles. I would have a technician come out and inspect (https://www.yourmechanic.com/services/engine-hesitates-during-acceleration-inspection) the coils and you will probably get a p0300...

Im not getting any preasure from front right cylinder could this be a blown head gasket 1994 gmc Jimmy

Hi there: It's very possible that reduced pressure from a cylinder is an indication of a blown head gasket. In most cases, this problem is caused by damaged piston rings or a hole in the piston, but a blown head...

Car turns on but turns off after foot is taken off the gas pedal. 1987 Honda Civic

Hello - if I follow your symptom descriptions correctly, this timing has still not been checked/adjusted. This would be the first step to take. Also, backfiring (through the intake) (https://www.yourmechanic.com/services/engine-is-backfiring-inspection) is usually a sign of an air leak in the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com