GMC Jimmy Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(63)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(63)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a GMC Jimmy Fuel Injector Replacement is $448 with $308 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 GMC JimmyV8-5.7LService typeFuel Injector ReplacementEstimate$1996.58Shop/Dealer Price$2460.58 - $3844.46
2003 GMC JimmyV6-4.3LService typeFuel Injector ReplacementEstimate$4578.83Shop/Dealer Price$5688.87 - $9014.88
1994 GMC JimmyV6-4.3LService typeFuel Injector ReplacementEstimate$1751.31Shop/Dealer Price$2154.50 - $3359.88
2005 GMC JimmyV6-4.3LService typeFuel Injector ReplacementEstimate$4578.83Shop/Dealer Price$5688.90 - $9014.92
1997 GMC JimmyV6-4.3LService typeFuel Injector ReplacementEstimate$1303.99Shop/Dealer Price$1533.81 - $2201.52
2001 GMC JimmyV6-4.3LService typeFuel Injector ReplacementEstimate$761.29Shop/Dealer Price$917.11 - $1380.09
1992 GMC JimmyV6-4.3LService typeFuel Injector ReplacementEstimate$1751.31Shop/Dealer Price$2154.51 - $3359.91
1998 GMC JimmyV6-4.3LService typeFuel Injector ReplacementEstimate$1303.99Shop/Dealer Price$1529.53 - $2194.04
Show example GMC Jimmy Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(63)

Rating Summary
56
2
1
0
4
56
2
1
0
4

Jeffrey

28 years of experience
870 reviews
Jeffrey
28 years of experience
GMC Jimmy V6-4.3L - Transmission Fluid Service - Fort Mill, South Carolina
Jeff contacted us via text an hour before our appointment time to let us know he was available to do the work on our vehicle earlier then expected, which we accepted. He showed up at our door thirty minutes later. He explained the service we had requested and he asked if we had any other concerns or questions, and we had none. He got right to work and after a little over an hour he had finished. He explained any issues he saw that might come up in the future. Jeff also answered all our questions about other estimates we had, Jeff, was very punctual, professional, and communicated well. I would recommend Jeff and we look forward to using his greatly appreciated services in the future.

Danny

12 years of experience
269 reviews
Danny
12 years of experience
GMC Jimmy V6-4.3L - ABS Light is on - Gloucester City, New Jersey
Thought he was a hard worker and dove right into the problem.Was sociable and friendly.

Stephen

33 years of experience
220 reviews
Stephen
33 years of experience
GMC Jimmy V6-4.3L - Intake Manifold Gaskets - Broomfield, Colorado
Stephen is extremely knowledgeable, thorough and very personable. He answered any and all questions I had during his visit. He made sure the work was complete in a very professional manner. I would welcome Stephen for any future repairs.

Tien

24 years of experience
903 reviews
Tien
24 years of experience
GMC Jimmy V6-4.3L - Car is not starting - Oakland, California
Tien was completely clear with explaining detail to detail of the problems with my vehicle. Also he was on time, made my appointment smooth, and efficient to where he finished early than estimated.

Excellent Rating

(63)

Rating Summary
56
2
1
0
4
56
2
1
0
4
Number of GMC Jimmy services completed
693+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

How to Replace a License Plate Light
When a license plate light bulb goes out, it may be illegal in some states to drive in public. Here's a guide on how to replace it.
How to Replace a Car Kickdown Cable
A car kickdown cable controls what gear the transmission is in. If worn out, it should be replaced to ensure a smooth and efficient drive.
B1909 OBD-II Trouble Code: Air Bag Crash Sensor #2 Ground Circuit Short to Ground
B1909 means there is a malfunction with the #2 airbag crash sensor circuit, most likely because of a bad electrical component or faulty sensor.

How do I set the seat belts in automatic locking mode?

Automatic locking mode is a feature that keeps the seat belts from having any slack. This feature should always be used when attaching a child restraint system. To set the system, follow these steps: 1. Buckle the seat belt. 2....

brake are making a metal loud noise when I brake.

Hello. The price to replace all 4 rotors, calipers, and brake pads is very close to the price quoted when I used the estimating guide that I use for repairs. The calipers are listed at $246 each, rotors are about...

Hello, do you know how much it costs to fixed a damaged axel on a 2005 Hyundai Elantra?

At auto parts stores, the axle costs roughly $70 on up. It takes about 1 to 2 hours to install the axle. The job requires special tools though and to ensure a trouble free result, the axle output seal (https://www.yourmechanic.com/services/axle-shaft-seal-replacement)...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com