GMC G2500 Brake fluid is leaking Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(22)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(22)

Brake fluid is leaking Inspection Service

How much does a Brake fluid is leaking Inspection cost?

On average, the cost for a GMC G2500 Brake fluid is leaking Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 GMC G2500V8-5.0LService typeBrake fluid is leaking InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1988 GMC G2500V6-4.3LService typeBrake fluid is leaking InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1983 GMC G2500V8-5.0LService typeBrake fluid is leaking InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1983 GMC G2500V8-6.2L DieselService typeBrake fluid is leaking InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1989 GMC G2500V6-4.3LService typeBrake fluid is leaking InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1986 GMC G2500V8-5.7LService typeBrake fluid is leaking InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1984 GMC G2500V8-5.0LService typeBrake fluid is leaking InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1981 GMC G2500V8-5.0LService typeBrake fluid is leaking InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example GMC G2500 Brake fluid is leaking Inspection prices

Your brakes are the most important safety system on your vehicle. It’s all too easy to take them for granted, but if they were to fail even once, the results could be catastrophic. Most automotive brake systems are hydraulic, which means that pressurized fluid is sent through the lines from the master cylinder to the calipers and drums in order to activate the pads/shoes and slow down the car. If your brake fluid is leaking, it’s a sign that there’s something seriously wrong.

How this system works:

Your brake system is both simple and complex. There are a number of parts required to make it work properly, but the underlying concept is not that difficult to understand. Your master cylinder is the heart of the system – it is responsible for both boosting brake performance (via the brake booster onto which the master cylinder mounts), and for holding and sending brake fluid through the system.

In a nutshell, your brake system works like this: You press the brake pedal, which activates the master cylinder. It pushes fluid into the lines and down to the calipers. The fluid pressure forces the calipers to close, squeezing the rotor between the brake pads. This creates drag and friction, slowing down the car.

However, if fluid is leaking from somewhere in the system, it could mean that you’ll have insufficient fluid for proper brake operation.

Common reasons for this to happen:

  • Worn Brake Pads: If you suspect fluid is leaking because the level in the reservoir is low, it might be nothing more than worn pads. As the pads wear, more fluid is held in the system (because the caliper piston remains farther out due to the reduced pad material).

  • Damaged Master Cylinder Reservoir: Over time, the plastic reservoir attached to your master cylinder becomes brittle due to heat exposure. It can eventually crack, allowing brake fluid to seep out and down the back of the engine.

  • Damaged Bleeder Valve: Each caliper has a bleeder. These valves allow mechanics to bleed air out of the lines, but they can become damaged (or can be knocked loose or even left loose after inexpert service).

  • Damaged Brake Line: Your car has both rubber and steel brake lines that carry fluid to and from the master cylinder. Both types are prone to wear and can be punctured. If this occurs, fluid will steadily leak out of the line.

  • Failed Wheel Cylinder: On drum brakes, one of the most likely culprits is the wheel seal. These will fail over time and through normal wear and tear, eventually weeping brake fluid.

  • Failed Piston Seal: The piston in your caliper is activated by fluid, and it’s a moving part, which means a seal is necessary to keep the fluid inside while allowing the piston to move. If the seal is damaged (cracked or punctured), it will leak brake fluid.

What to expect:

A professional mobile mechanic will come to your home or office to inspect your brake system, including the master cylinder, brake lines, drums, calipers and other components. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will inspect all aspects of your vehicle’s brake system, including possibly checking trouble codes in the computer if the ABS light is on (set off by the brake fluid level sensor). The mechanic will trace the leak to its origin, and then advise you on the next step required to repair the problem.

How important is this service?

Without an operational brake system, your car cannot be legally or safely driven. Leaking fluid is cause for concern – if the fluid level drops below a certain level, the brakes will not work. It’s essential to have your brake system inspected during normal maintenance, and to pay close attention to the fluid level in the reservoir. Any leaks should be immediately inspected and repaired. One of our professional mechanics can inspect, diagnose and repair your brake fluid leak.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(22)

Rating Summary
22
0
0
0
0
22
0
0
0
0

John

19 years of experience
86 reviews
John
19 years of experience
GMC G2500 V8-5.7L - Coolant is leaking - Memphis, Tennessee
Very knowledgeable, excellent work ethic, on time, and pleasant.

Joseph

27 years of experience
578 reviews
Joseph
27 years of experience
GMC G2500 V8-5.7L - Car is not starting - Houston, Texas
.

Keith

36 years of experience
13 reviews
Keith
36 years of experience
GMC G2500 V8-5.7L - Car is not starting - Washington, District of Columbia
Knowledgeable

Chris

16 years of experience
419 reviews
Chris
16 years of experience
GMC G2500 V8-5.7L - Power Steering Fluid Service - San Francisco, California
Good stuff

Excellent Rating

(22)

Rating Summary
22
0
0
0
0
22
0
0
0
0
Number of GMC G2500 services completed
242+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2011 Volvo S40
When When you think of Volvo, safety undoubtedly comes to mind first, and that’s exactly what the 2011 Volvo S40 is all about. Of course, it’s also comfortable, refined and features a pretty high-performing engine, to boot. You might actually...
Symptoms of a Bad or Failing Cruise Control Switch
If you use cruise control and the light doesn't illuminate or the car cannot maintain a set speed, you may have to replace the cruise control switch.
How Long Does an EGR Pressure Feedback Sensor Last?
In In today's world people are more aware of exhaust gases than ever before. With that said measures have been built into modern vehicles that are meant to cut down on the emissions released into the air. Built into your...

How are MP3 tracks and folders organized in the audio system?

Your car’s audio system is capable of recognizing MP3 files and folder when loaded on a CD-R or CD-RW. It offers two different ways to play those files: Track Mode: This is the default method. The system will automatically scan,...

Shifter loose transmission stuck 1992 Ford F150

Hi there - unhook the shifter from the transmission lever, and try to move the transmission lever to the Park position. If this is successful, start working your way back towards the shift lever on the column. Re-connect the cable...

What does it mean that my rotors are glazed? Is there anything I should do?

Usually when someone says the rotors are glazed, they mean that the surface has acquired a high polish form long term use. Sometimes this might lead to brakes that screech when you are coming to a stop. If that is...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com