GMC Envoy XUV Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(27)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(27)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a GMC Envoy XUV Fuel Injector Replacement is $1166 with $1026 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 GMC Envoy XUVL6-4.2LService typeFuel Injector ReplacementEstimate$2207.96Shop/Dealer Price$2724.80 - $4267.22
2005 GMC Envoy XUVV8-5.3LService typeFuel Injector ReplacementEstimate$2790.35Shop/Dealer Price$3453.27 - $5437.92
2005 GMC Envoy XUVL6-4.2LService typeFuel Injector ReplacementEstimate$2198.95Shop/Dealer Price$2714.05 - $4255.16
2004 GMC Envoy XUVV8-5.3LService typeFuel Injector ReplacementEstimate$2266.67Shop/Dealer Price$2798.70 - $4390.60
Show example GMC Envoy XUV Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(27)

Rating Summary
27
0
0
0
0
27
0
0
0
0

Enrique

22 years of experience
244 reviews
Enrique
22 years of experience
GMC Envoy XUV L6-4.2L - AC Compressor - Orlando, Florida
We had a perfect experience with your mechanic.

Attila

20 years of experience
1104 reviews
Attila
20 years of experience
GMC Envoy XUV V8-5.3L - Thermostat - Plainfield, New Jersey
Great guy and gave great service definitely refer him to anyone who uses your mechanic. Thank you

Jeffrey

28 years of experience
870 reviews
Jeffrey
28 years of experience
GMC Envoy XUV L6-4.2L - Brake Pads Replacement (Rear) - York, South Carolina
job well done

Rodric

15 years of experience
418 reviews
Rodric
15 years of experience
GMC Envoy XUV L6-4.2L - Car will not turn over - Atlanta, Georgia
Mechanic showed up a few minutes early and was very pleseant and extremely knowledgeable. Problem solved in record time. Customer service and ability to diagnose issues to be aware of were discussed . I am so glad I found this service ! Ive probably found a great mechanic here in Atlanta.

Excellent Rating

(27)

Rating Summary
27
0
0
0
0
27
0
0
0
0
Number of GMC Envoy XUV services completed
297+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

P0835 OBD-II Trouble Code: Clutch Pedal Switch B Circuit High
P0835 means there is an issue with the clutch position sensor circuit, possibly due to a defective or misadjusted sensor, or faulty wiring.
How to Put on Snow Chains
Putting snow chains on your car tires makes winter driving safe and easy. It's smart to practice installing snow chains before snow starts to fall.
How Long Does Transmission Fluid Last?
Transmission Transmission fluid lubricates all the moving parts of your car transmission, and in an automatic transmission, it also acts as a coolant and viscous fluid that delivers engine power to the transmission. What kind of transmission fluid to use...

AC blows warm while idling, cools during driving

Hello. There are a couple of things that could be causing your problem. The purpose of the high pressure hose is to increase and decrease AC pressure during different driving conditions. If the a/c isn’t blowing cold air when the...

Hi There, Generally, the check engine light (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) comes on when something fairly serious is going on with the vehicle. This can happen for many different reasons such as a faulty mass air flow sensor, a faulty O2 sensor (as...

04 cvpi started running lean after changing spark plugs

Check to make sure the plugs are tight but do NOT overtighten them. Use a calibrated inch pound torque wrench only; if oil is on the spark plug threads, request assistance from a mechanic in tightening the plugs because the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com