GMC Envoy XL Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(70)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(70)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a GMC Envoy XL Car Thermostat Replacement is $248 with $108 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 GMC Envoy XLL6-4.2LService typeCar Thermostat ReplacementEstimate$403.30Shop/Dealer Price$468.98 - $657.90
2003 GMC Envoy XLL6-4.2LService typeCar Thermostat ReplacementEstimate$408.89Shop/Dealer Price$472.98 - $660.72
2006 GMC Envoy XLL6-4.2LService typeCar Thermostat ReplacementEstimate$394.29Shop/Dealer Price$458.22 - $645.84
2003 GMC Envoy XLV8-5.3LService typeCar Thermostat ReplacementEstimate$435.93Shop/Dealer Price$492.95 - $657.74
2002 GMC Envoy XLL6-4.2LService typeCar Thermostat ReplacementEstimate$408.89Shop/Dealer Price$474.63 - $663.60
2006 GMC Envoy XLV8-5.3LService typeCar Thermostat ReplacementEstimate$448.81Shop/Dealer Price$526.51 - $755.13
2005 GMC Envoy XLL6-4.2LService typeCar Thermostat ReplacementEstimate$394.29Shop/Dealer Price$458.24 - $645.87
2004 GMC Envoy XLV8-5.3LService typeCar Thermostat ReplacementEstimate$448.81Shop/Dealer Price$526.37 - $754.88
Show example GMC Envoy XL Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(70)

Rating Summary
70
0
0
0
0
70
0
0
0
0

Theodore

10 years of experience
1656 reviews
Theodore
10 years of experience
Envoy XL 2002 - Car idle is rough - Bellevue, WA
Very informative and honest.

Ruben

9 years of experience
55 reviews
Ruben
9 years of experience
Envoy XL 2006 - Alternator - Columbia, SC
Prompt. Professional. Used professional new oem alternator. Works flawlessly. If I need future service, PLEASE set it up so that Ruben will be my mechanic!

Arturo

25 years of experience
253 reviews
Arturo
25 years of experience
Envoy XL 2004 - Brakes, Steering and Suspension Inspection - Chula Vista, CA
Very happy with the service to my vehicle.

Jay

30 years of experience
1009 reviews
Jay
30 years of experience
Envoy XL 2005 - Tune-up - Colton, CA
Friendly

Excellent Rating

(70)

Rating Summary
70
0
0
0
0
70
0
0
0
0
Number of GMC Envoy XL services completed
770+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Ignition Coil
Ignition Ignition coils operate in a very similar fashion to a transformer; with a 12-volt power source that produces output current simultaneously to an input current that’s being applied. By creating an efficient magnetic field, the force of the electricity...
How to Improve Your Gas Mileage
Every driver wants a fuel efficient car. Check your tire pressure, replace old spark plugs, and change your engine air filter to improve your MPG.
How to Increase the Resale Value of Your Vehicle
When you sell your car you want to make extra money on the sale. Keep your car's resale value high by keeping your car clean and well maintained.

Car won't start after gas is filled up

Fuel pressure needs to be checked on your 1996 Lexus SC300. The fuel pump is cooled by the fuel, so running out of fuel can cause the fuel pump (https://www.yourmechanic.com/services/fuel-pump-replacement) to heat up and can become less effective or non-operational....

Pinpointing an oil leak - part coming off of the engine toward the back on the passenger side

Hello. From your description, it sounds like you are referring to the turbo intercooler. It is common over time for oil to build up in here due to wear in the turbo charger. I usually check the oil in the...

What else can cause an over heating engine. .

Overheating in stop and go traffic can be due to non functioning electric radiator cooling fans. A poorly functioning water pump can be a cause, too, for example if the drive belt is not tight enough. If the car is...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com