GMC Canyon Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(59)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(59)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a GMC Canyon Front Crankshaft Seal Replacement is $363 with $41 for parts and $322 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2012 GMC CanyonV8-5.3LService typeFront Crankshaft Seal ReplacementEstimate$1183.62Shop/Dealer Price$1233.48 - $1326.34
2010 GMC CanyonL5-3.7LService typeFront Crankshaft Seal ReplacementEstimate$695.60Shop/Dealer Price$723.91 - $791.51
2005 GMC CanyonL5-3.5LService typeFront Crankshaft Seal ReplacementEstimate$695.60Shop/Dealer Price$724.02 - $791.70
2010 GMC CanyonV8-5.3LService typeFront Crankshaft Seal ReplacementEstimate$1120.55Shop/Dealer Price$1158.21 - $1241.93
2011 GMC CanyonL4-2.9LService typeFront Crankshaft Seal ReplacementEstimate$418.22Shop/Dealer Price$446.49 - $514.07
2011 GMC CanyonL5-3.7LService typeFront Crankshaft Seal ReplacementEstimate$695.60Shop/Dealer Price$724.60 - $792.73
2010 GMC CanyonL4-2.9LService typeFront Crankshaft Seal ReplacementEstimate$418.22Shop/Dealer Price$443.14 - $508.20
2008 GMC CanyonL4-2.9LService typeFront Crankshaft Seal ReplacementEstimate$418.22Shop/Dealer Price$443.10 - $508.13
Show example GMC Canyon Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(59)

Rating Summary
55
1
1
0
2
55
1
1
0
2

Ben

42 years of experience
1589 reviews
Ben
42 years of experience
GMC Canyon L5-3.5L - Check Engine Light is on - Cypress, Texas
Best auto repair experience ever, and I never had to leave my driveway. Ben arrived on time and knew exactly what to do.

Kenneth

21 years of experience
870 reviews
Kenneth
21 years of experience
GMC Canyon L4-2.9L - Car is stalling - Los Angeles, California
Punctual, friendly and answered all of our questions. Thank you!

Pardeep

22 years of experience
1277 reviews
Pardeep
22 years of experience
GMC Canyon L5-3.7L - Oil Change - Fremont, California
Well done, I will ask for Pardeep each time I need to have the truck serviced...

Choeun

16 years of experience
181 reviews
Choeun
16 years of experience
GMC Canyon L4-2.9L - Car is not starting - Elk Grove, California
Very professional.

Excellent Rating

(59)

Rating Summary
55
1
1
0
2
55
1
1
0
2
Number of GMC Canyon services completed
649+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

How Long Does a Windshield Washer Reservoir Last?
Most Most people take a clean windshield for granted and neglect to realize just how many parts have to work together to clean a dirty front glass. Making sure that each of the parts that helps to keep the windshield...
How to Replace a Broken Exhaust Support
Exhaust supports keep your car's exhaust system safe and secure. Signs of failure include rattling, banging, and knocking coming from under the car.
How Long Does a Courtesy Light Bulb Last?
The The courtesy light bulb is also called a dome light and is located on the ceiling in your vehicle. It is normally towards the front of the car and provides light when you open the car door. This light...

locks up at high rpm then able to free up and run again

The problem may be the transmission pilot bearing for the transmission input shaft on the back of the crankshaft seizing up or the input shaft on the transmission seizing. If it is not the transmission, then it is the internal...

cannot figure out how to use the tensioner pulley for serpentine belt removal

Hello, and thank you for writing in. We currently do not have videos available to share with you, however we can do our best to walk you through the process and how the pulley works. What you see when you...

Why Doesn't My Brake lights Work And I Changed The Brake light Switch

Hi there. It sounds like you may have either a blown fuse or a broken wire. Check and replace the fuses/relays as necessary. It may be necessary to check for battery voltage with a digital volt/ohm meter at the brake...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com