GMC C2500 Throttle Body Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(23)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(23)

Throttle Body Replacement Service

How much does a Throttle Body Replacement cost?

On average, the cost for a GMC C2500 Throttle Body Replacement is $440 with $300 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 GMC C2500V8-6.2L DieselService typeThrottle Body ReplacementEstimate$973.78Shop/Dealer Price$1182.08 - $1798.86
1995 GMC C2500V8-5.7LService typeThrottle Body ReplacementEstimate$842.45Shop/Dealer Price$1018.40 - $1542.12
1992 GMC C2500V8-7.4LService typeThrottle Body ReplacementEstimate$970.89Shop/Dealer Price$1178.97 - $1799.04
1998 GMC C2500V8-5.7LService typeThrottle Body ReplacementEstimate$747.39Shop/Dealer Price$899.60 - $1352.04
1993 GMC C2500V8-6.5L Turbo DieselService typeThrottle Body ReplacementEstimate$1093.77Shop/Dealer Price$1334.05 - $2047.38
1991 GMC C2500V8-5.0LService typeThrottle Body ReplacementEstimate$2376.97Shop/Dealer Price$2936.71 - $4611.45
1995 GMC C2500V8-6.5L DieselService typeThrottle Body ReplacementEstimate$1093.77Shop/Dealer Price$1332.59 - $2044.83
1994 GMC C2500V8-5.0LService typeThrottle Body ReplacementEstimate$2376.97Shop/Dealer Price$2936.57 - $4611.20
Show example GMC C2500 Throttle Body Replacement prices

What is the throttle body and how does it work?

The throttle body is an air metering device mounted between the air filter and snorkel, and the intake plenum. Within the throttle body is a movable throttle plate whose position controls the amount of air that enters the engine to determine engine speed. Throttle body designs vary. Some incorporate an idle air control valve, throttle position sensor, and other electronic throttle controls. The throttle plate in the throttle body can be controlled directly by an accelerator pedal cable or fully electronically in the newest drive-by-wire systems.

When to consider replacing the throttle body:

  • Check engine light and/or reduced power warning light is on. Most modern throttle bodies have electrical components, such as a throttle position sensor. These components are monitored by the powertrain control module (PCM). If the check engine light or reduced power warning light comes on, a mechanic will determine if any of the stored trouble codes implicate a throttle body malfunction.
  • Wrong idle speed. Carbon deposits in the throttle body, particularly around the movable throttle plate or in the idle air control valve, can cause the engine idle speed to be too low or too high.
  • Poor transmission shifting. In some applications, transmission shift timing relies on signal outputs from the throttle body. If the throttle position sensor is defective, that might adversely affect shift timing and feel.

How do mechanics replace the throttle body?

  • The engine cover is removed, if necessary.
  • The flexible rubber snorkel from the air filter housing to the throttle body is disconnected. Typically, the connection is made with a large stainless steel hose clamp.
  • The electrical connections to the throttle body are removed.
  • If the throttle body is not a drive-by-wire system, the accelerator cable and cruise control cable are disconnected and set aside.
  • The bolts retaining the throttle body to the plenum, the gasket, and the throttle body are removed. If the throttle body is being cleaned and tested for re-use, approved chemicals are used in the cleaning process.
  • The new or serviced throttle body is re-attached to the plenum and the bolts torqued to factory specifications.
  • All cables and electrical connections are restored. The intake air snorkel is reconnected.
  • If applicable, the electronic throttle installation and idle re-learn procedures are performed using an appropriate scan tool.
  • Finally, the engine is started, brought to normal operating temperature, and idle speed is checked. The car is road tested to ensure normal operation and no illumination of warning or service lights.

Is it safe to drive with a throttle body problem?

Yes. But, the vehicle may be limited in power or put into what is referred to as limp mode, in order to get the vehicle to a repair facility. If the check engine light is on, or the electronic throttle control warning light is on, but there is no noticeable difference in engine performance, the car can be safely driven. However, it is best to have it diagnosed and repaired at your earliest convenience to avoid unexpected breakdown or possible damage to the catalytic converter.

When replacing the throttle body keep in mind:

  • Many modern throttle bodies have spring loaded sensors and plastic gears that are not intended to be manipulated directly during any diagnostics or inspections. These components are controlled electronically or generate signals. It is best to let a mechanic use approved tests to diagnose the problem.
  • Wiring faults, bad grounds, or bad terminal connections can make it appear as though an electronically controlled throttle has failed. A mechanic will always rule out all other causes before replacing the throttle body.
  • When cleaning the throttle body, special care should be taken to use only special spray cleaners designed to not damage electrical components or sensors.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(23)

Rating Summary
22
1
0
0
0
22
1
0
0
0

Paul

34 years of experience
134 reviews
Paul
34 years of experience
GMC C2500 V8-5.7L - Check Engine Light is on - Middlesex, North Carolina
Well knowledgeable and professional

Chris

21 years of experience
448 reviews
Chris
21 years of experience
GMC C2500 V8-7.4L - Windshield Wiper/Washer System Inspection - Portland, Oregon
Helped me save some money by figuring out it was something else wrong with my truck. Good guy

H

27 years of experience
828 reviews
H
27 years of experience
GMC C2500 V8-5.7L - Exhaust Manifold - Atherton, California
This guy is great. Even swapped a part in the rain! When I need more work done, I'm calling De Jesus! For sure

Paul

34 years of experience
134 reviews
Paul
34 years of experience
GMC C2500 V8-5.7L - Fuel Injector - Middlesex, North Carolina
Once again professional service

Excellent Rating

(23)

Rating Summary
22
1
0
0
0
22
1
0
0
0
Number of GMC C2500 services completed
253+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

What to Do if Your Car is Recalled
If If you’ve received mail from your vehicle’s manufacturer, you probably wondered why at first. After opening it, it’s incredibly likely that it was a recall notice because there’s very little they would need to contact you for. And then...
Symptoms of a Bad or Failing Ignition Lock Cylinder
Common signs include the car not starting, the key getting stuck in the ignition or not going in, and issues power on the vehicle.
How to Use a Ball Joint Press
Ball joints support a hub that connects car tires with the wheel assembly. A ball joint press installs and removes ball joints from the socket.

How do I use the tow feature?

The tow feature is turned on by pressing the Tow switch on the instrument panel, at which point the Tow/Haul light will illuminate. Press the Tow switch a second time to turn the feature off. Tip Never use the tow...

Car has a coolant leak

If you did not bleed the cooling system after performing the repair, there is probably air in the system. Air can be bled by running the engine with radiator cap removed and a special funnel installed, or by using a...

How long does it take to replace the hinges?

The door hinge replacement takes about 2 to 3 hours to replace depending on who is performing the job and is they have a helper to hold the door up in place or not. If you need further assistance with...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com