GMC C2500 Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(22)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(22)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a GMC C2500 Fuel Injector Replacement is $487 with $347 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1999 GMC C2500V8-7.4LService typeFuel Injector ReplacementEstimate$3175.24Shop/Dealer Price$3867.12 - $5919.25
2000 GMC C2500V8-6.5L Turbo DieselService typeFuel Injector ReplacementEstimate$1732.95Shop/Dealer Price$2006.74 - $2809.11
1996 GMC C2500V8-6.5L Turbo DieselService typeFuel Injector ReplacementEstimate$1655.11Shop/Dealer Price$1909.56 - $2653.64
1990 GMC C2500V8-5.7LService typeFuel Injector ReplacementEstimate$1988.21Shop/Dealer Price$2450.62 - $3833.68
1995 GMC C2500V8-6.5L Turbo DieselService typeFuel Injector ReplacementEstimate$1732.95Shop/Dealer Price$2013.63 - $2821.17
1999 GMC C2500V8-5.7LService typeFuel Injector ReplacementEstimate$1116.69Shop/Dealer Price$1295.82 - $1820.15
1992 GMC C2500V8-6.2L DieselService typeFuel Injector ReplacementEstimate$1718.37Shop/Dealer Price$2054.48 - $3051.43
1995 GMC C2500V6-4.3LService typeFuel Injector ReplacementEstimate$1752.29Shop/Dealer Price$2155.72 - $3361.84
Show example GMC C2500 Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(22)

Rating Summary
21
1
0
0
0
21
1
0
0
0

Marco

24 years of experience
157 reviews
Marco
24 years of experience
C2500 1991 - Alternator - Corona, CA
Great guy, with a great attitude. He was very knowledgeable about the type of truck I have and most definitely I’ll be using him again no doubt about that.

Chris

15 years of experience
546 reviews
Chris
15 years of experience
C2500 1993 - Windshield Wiper/Washer System Inspection - Portland, OR
Helped me save some money by figuring out it was something else wrong with my truck. Good guy

Excellent Rating

(22)

Rating Summary
21
1
0
0
0
21
1
0
0
0
Number of GMC C2500 services completed
242+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

How to Become a Certified Mobile Vehicle Inspector (State Car Inspector Certified) in Oregon
Automotive technician jobs can include mobile vehicle inspector. Apply to become an employee of the DEQ in order to perform emissions tests.
P2438 OBD-II Trouble Code: Secondary Air Injection System Air Flow/Press Sensor Circuit High Bank 2
P2438 P2438 code definition A P2438 trouble code means that the PCM has detected a problem within the secondary air injection system. Another component that can cause a P2438 code to be stored is a problem with the pressure sensor...
How To Use Hazard Lights
Your Your car is equipped with a number of different lights. Depending on the light in question, they serve purposes ranging from visibility to directionality to safety to convenience. Where do your hazard lights fit into that? Actually, it’s a...

I replace my crank shaft sensor, but it still not working and I've checked the connector. I think it has no power or ground. How do I fix it?

Hello. It sounds like you are saying that the car is starting but dying when you try to pull away. If the car is starting and idling, then the crank position sensor (https://www.yourmechanic.com/services/crankshaft-position-sensor-replacement) is probably alright. Usually a malfunctioning sensor...

uncomfortable driver's seat

Hello, thank you for writing in. Even with the adjustments you can make, seats are designed to be one size fits most. With that being said, before you invest too much money into a seat cover, or new seat, you...

2004 jag xj8 4.2 v8 auto trans 5spd had trans fluid leak. lost approx 6qts. repaired leak and filled per instructions on alldata w

The two codes, P0736 (https://www.yourmechanic.com/article/p0736-obd-ii-trouble-code-reverse-incorrect-gear-ratio-by-valerie-johnston) and P0730 (https://www.yourmechanic.com/article/p0730-obd-ii-trouble-code-incorrect-gear-ratio-by-ian-swan) overlap to some extent insofar as possible faults. If the transmission fluid got really low, the transmission might have overheated with several consequences: burnt fluid; mechanical damage, case/part distortion, damage to hydraulic...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com