GMC C2500 Brake rotors are turning blue Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(23)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(23)

Brake rotors are turning blue Inspection Service

How much does a Brake rotors are turning blue Inspection cost?

On average, the cost for a GMC C2500 Brake rotors are turning blue Inspection is $105 with $0 for parts and $105 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1986 GMC C2500V8-5.7LService typeBrake rotors are turning blue InspectionEstimate$124.99Shop/Dealer Price$133.39 - $139.69
1998 GMC C2500V8-7.4LService typeBrake rotors are turning blue InspectionEstimate$104.99Shop/Dealer Price$113.41 - $119.72
1979 GMC C2500V8-5.7LService typeBrake rotors are turning blue InspectionEstimate$104.99Shop/Dealer Price$113.41 - $119.72
1981 GMC C2500L6-4.8LService typeBrake rotors are turning blue InspectionEstimate$104.99Shop/Dealer Price$113.39 - $119.68
1993 GMC C2500V8-7.4LService typeBrake rotors are turning blue InspectionEstimate$104.99Shop/Dealer Price$113.42 - $119.75
1992 GMC C2500V8-5.0LService typeBrake rotors are turning blue InspectionEstimate$104.99Shop/Dealer Price$113.41 - $119.72
1998 GMC C2500V8-5.0LService typeBrake rotors are turning blue InspectionEstimate$124.99Shop/Dealer Price$130.87 - $135.28
1992 GMC C2500V8-6.2L DieselService typeBrake rotors are turning blue InspectionEstimate$124.99Shop/Dealer Price$131.24 - $135.94
Show example GMC C2500 Brake rotors are turning blue Inspection prices

In a disc brake system, your calipers, pads and rotors are vital components for operation and safe slowing and stopping. In normal circumstances, your rotors should be silvery or gray. However, under some conditions, they can turn blue. This is a sign that there’s something wrong with your brakes, and it’s highly advised that you take action as soon as possible.

How this system works:

Disc brakes are actually pretty easy to understand. Pressurized brake fluid is sent through the lines from the master cylinder. In the caliper, the fluid actuates a piston, which effectively closes the caliper. This pinches the brake rotor between the inner and outer brake pads.

The harder you press the brake pedal, the harder the caliper pinches/squeezes the rotor. In a car equipped with antilock brakes, the ABS system keeps them from locking up by pulsating the brakes dozens of time per second.

The squeezing action of the caliper and pads against the rotor creates friction and heat. Friction is a necessary component here–it’s what slows and stops your car. Heat is unavoidable, but excessive temperatures can actually cause damage. This is where bluing can occur. If one of your rotors has turned blue, it’s important to have the problem diagnosed, as it’s an indication that something’s wrong. Over time, it could even lead to cracking of the rotor and damage to the pads, as well as compromising your safety on the road.

Common reasons for this to happen:

  • Locked Caliper: One very common reason for rotors to turn blue is that the caliper is locked and the brake pads remain in almost constant contact with the metal. This might be slight enough that you don’t notice any drag during normal operation, but it will be enough to generate significant heat and wear.

  • Corroded Slide Pins: Your car’s calipers slide back and forth on metal pins. These pins need to be well lubricated, clean and free of debris. If they become corroded, the caliper will not slide in and out properly and can remain too close to the rotor rather than moving back to the start position.

  • Pinched/Deteriorating Brake Line: Your brakes work on hydraulic pressure. If there’s damage to one of the brake lines (a kink, or internal damage to the liner that limits the amount of fluid flowing in and out), it can cause your caliper to stay at least slightly engaged at all times. This generates heat and blues your rotor.

  • Driver Error: If you’re a “two-footed” driver or regularly ride your brakes because you do a lot of stop and go driving or live in an area with lots of hills, you could be the inadvertent cause of the problem. Constantly engaging your brakes causes the same buildup of heat as having a locked caliper, but you’ll notice bluing on two or four rotors, rather than just one.

What to expect:

A top-rated mobile mechanic will come to your home or office to inspect your brake system, including the caliper, rotor, lines, pads and more. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will need to inspect the entire system visually. A test drive may be necessary, as well as other diagnostic steps. The mechanic will determine if there is drag on the affected wheel/wheels from a locked caliper and then advise you on the next step in the repair process.

How important is this service?

Having brake rotors that turn blue is more than just an anomaly. It can become an expensive problem, and it can also reduce your safety on the road. Extreme heat can cause your rotors to warp and even crack, and your brake pads will deteriorate rapidly, leaving you with less stopping power. If the problem affects both front brakes, you may also notice brake fade. One of our professional mechanics can diagnose and repair the problem for you.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(23)

Rating Summary
22
1
0
0
0
22
1
0
0
0

Michael

12 years of experience
17 reviews
Michael
12 years of experience
GMC C2500 V8-5.7L - Car is not starting - Rialto, California
Good

Jose

18 years of experience
433 reviews
Jose
18 years of experience
GMC C2500 V8-5.7L - Oil Change - Portland, Oregon

H

27 years of experience
828 reviews
H
27 years of experience
GMC C2500 V8-5.7L - Engine is running louder than normal Inspection - Atherton, California
Through inspection. Found the issue quickly. Recommended I swap for a new part. I will be looking to have this guy work on my truck!

Jason

10 years of experience
175 reviews
Jason
10 years of experience
GMC C2500 V8-5.7L - Coolant is leaking - Atherton, California
Jason was very thorough in his inspection of my truck. He also was quite patient and listened to all my concerns. Quality recommendations and a great personality.

Excellent Rating

(23)

Rating Summary
22
1
0
0
0
22
1
0
0
0
Number of GMC C2500 services completed
253+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

Which Type (Octane) of Gas Is Recommended for My Car?
When When someone pulls up to a gas station, the first thing they’ll see is the big sign lit up with the prices for the different grades of gasoline. There’s regular, premium, super, and a number of other variations of...
How to Replace an AC Clutch Cycling Switch
An AC clutch cycling switch meters low side AC pressure. This switch helps the AC system maintain proper cabin and evaporator temperatures.
5 Best Mileage-Tracking Apps
Taxes for those who drive for a living might include significant deductibles with accurately-tracked mileage.

How do I customize the Remote Start Auto Heat Seat settings?

The Remote Start Auto Heat Seats setting allows you to choose whether or not the heated seats turn on when using the remote start feature on cold days. Adjusting the settings takes only a few steps: 1. Turn on the...

No acceleration or RPM increase while pressing gas pedal

It sounds like you may have an issue with your throttle position sensor (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-throttle-position-sensor). This sensor sends a reference voltage to your power-train control module, which uses that to determine ignition timing and fuel trims. If the power-train control module...

cylinder 4 misfire code reading?

It is helpful to state what kind of Dodge it is as some motors have pattern failures that other do not. Either way, there are a few simple tests that can be performed on any fuel injected motor to figure...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com