GMC Acadia Limited Engine oil is black and gritty Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(2,994)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(2,994)

Engine oil is black and gritty Inspection Service

How much does a Engine oil is black and gritty Inspection cost?

On average, the cost for a GMC Acadia Limited Engine oil is black and gritty Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2017 GMC Acadia LimitedV6-3.6LService typeEngine oil is black and gritty InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
Show example GMC Acadia Limited Engine oil is black and gritty Inspection prices

Car engines need oil to operate smoothly and efficiently. Engine oil helps lubricate the dozens of moving and interacting parts, helps prevent rust and corrosion as well as aiding in removing the heat that an engine generates. Modern oil also helps keep an engine clean by removing sludge and build-up. An engine without oil simply will not function.

Brand new engine oil is a lovely amber color but over time it will turn black and in some cases will get gritty. Fortunately, this is usually not a problem, it is simply a result of the oil doing the job it was designed to do.

How this system works:

The primary function of engine oil is to lubricate the various moving parts of an engine. The constant contact between these moving parts generates both heat and wear and tear. Engine oil keeps friction to a minimum and dissipates the heat.

Engine oil is stored in the oil pan. The pan holds between 4 and 6 quarts of oil. When an engine is started, an oil pump sucks the oil from the pan through the pickup tube. The oil then travels to the oil filter, which removes any dirt and debris that has accumulated in it and then sends the oil into the engine via spurt holes. The oil moves through the engine and eventually makes it way back to the oil pan where the process starts again.

Common reasons for this to happen:

  • Normal Wear and Tear: Regardless of how often oil is changed, eventually it becomes black and slightly gritty. This simply means it is doing its job. Modern detergent engine oils which have detergent additives are designed to disperse the tiny particles or engine sludge and hold them in suspension in the oil so they do not build up on engine parts.

This will make the oil darker in color, and slightly gritty but it’s better for the build up to be trapped in the oil then building up on the vehicles engine parts. Oil can only hold so much sludge and eventually it will need to be replaced.

  • Dirty Oil Filter: An oil filter’s primary function is to filter out contaminants in the oil that it picks up while cycling through the engine. Over time an oil filter will become full and will need to be replaced. If it is unable to filter the oil the contaminants will remain in the oil and possibly damage the engine.

  • Overdue for an Oil Change: Oil needs to be changed on a regular basis. While oil turning black and getting slightly gritty is normal, extremely black oil that develops globs on the dipstick needs to be changed immediately. The interval between oil changes will vary depending on the type of oil being used but it is a good idea to follow the manufacturers recommendations.

While 3,000 miles used to be the recommendation, most modern oils, especially synthetics can go between 7,000-10,000 before an oil change is needed.

  • Oil Light Comes On: In most vehicles, if the Oil Warning light comes on, it is reason for immediate concern. In most cases this will indicate a low oil pressure situation, which could be the result of a failing oil pump or a leak. This can do severe damage to the engine. The vehicle should be inspected and repaired immediately.

  • Oil Level is Dropping: If the vehicle is consistently low on oil or the level is dropping sharply over a short period of time, there is probably an oil leak somewhere in the system. An oil leak can lead to a dangerously low amount of oil in the car and should be repaired immediately.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the Oil is Black and Gritty issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic look for normal wear and tear of the engine oil, along with the oil filter, oil level and other indications that will help determine if any problem exists or if additional procedures are required in order to provide you with an accurate diagnosis.

How important is this service?

In most cases black and gritty engine oil is normal. Engine oil should be changed on a regular basis according to the manufacturers recommendations. Going too long between oil changes can affect the performance of the engine and lead to expensive repairs.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(2,994)

Rating Summary
2,834
79
21
10
50
2,834
79
21
10
50

Robert

16 years of experience
81 reviews
Robert
16 years of experience
GMC Acadia Limited V6-3.6L - Check Engine Light is on - Maricopa, Arizona
I scheduled Robert last minute for a same day check on our engine light. He made out to my home and proceeded to finish his diagnostic on our suv. He went over and beyond working late into the night to get us answers. We will definitely be using him in the future !

Joseph

20 years of experience
652 reviews
Joseph
20 years of experience
GMC Acadia V6-3.6L - Turn Signal Bulb Replacement (Front) - Salt Lake City, Utah
Joseph was awesome. Was a little early to the appt. Explained exactly what he needed to do to get the job done. Very precise and knowledgeable. Will definitely use again.

Dan

39 years of experience
998 reviews
Dan
39 years of experience
GMC Yukon V8-5.3L - Front suspension bump stop - Alpharetta, Georgia
Dan is great! He does a great job, is friendly and explains the work performed. I would highly recommend him to anyone needing automotive repair. He is A+.

Lavell

28 years of experience
272 reviews
Lavell
28 years of experience
GMC Sierra 1500 HD V8-6.0L - Check Engine Light is on Inspection - Orinda, California
Lavell was great, very knowledgeable and contextualized his findings so I could understand not just what he found, but also the corresponding implications.

Excellent Rating

(2,994)

Rating Summary
2,834
79
21
10
50
2,834
79
21
10
50
Number of GMC services completed
32934+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Valve Cover Gasket
Common signs of a faulty gasket include a burning oil smell, dirty valve cover, oil leaks, low engine oil, and a rough-running engine that misfires.
P0963 OBD-II Trouble Code: Pressure Control Solenoid A Control Circuit High
P9063 means there is an issue with the pressure control solenoid A control circuit due to low or dirty transmission fluid, faulty wiring or solenoid.
P0873 OBD-II Trouble Code: Transmission Fluid Pressure Sensor/Switch C Circuit High
P0873 means the transmission fluid pressure level is abnormal due to Dirty, contaminated or burnt transmission fluid, or a faulty transmission system.

The car won't start after the gas that was a few days in the sun, is put in

Hello. The gas that you used should not have any problems after only a few days. If the fuel was that low, the issue may be a failed fuel pump (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-fuel-pump). When the fuel gets this low, the pump overheats...

Car issues. I need help to determine what's wrong with it.

First you will need to test compression on all 4 cylinders with all of the spark plugs out and the ignition system disabled. If the compression is good on all of the cylinders, then the valves in cylinder 2 are...

97 [camry](/topics-camry/) fwd 2.2 liter starts but does not drive or reverse

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com