GMC Acadia Limited Car Starter Repair at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(110)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(110)

Car Starter Repair Service

How much does a Car Starter Repair cost?

On average, the cost for a GMC Acadia Limited Car Starter Repair is $469 with $287 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2017 GMC Acadia LimitedV6-3.6LService typeCar Starter RepairEstimate$776.46Shop/Dealer Price$924.88 - $1359.61
Show example GMC Acadia Limited Car Starter Repair prices

What's a car starter motor and how does it work?

The starter motor is a powerful, compact electric motor that will turn a car’s engine over at about 200 RPM in order to start the engine. The starter is at the terminus of a circuit that includes the battery, the ignition switch, a neutral safety switch, relays and fuses.

When you turn the ignition key to start, or press the start button in some vehicles, the starter circuit is completed and the starter will run. Most starters have a small pinion gear that engages a larger ring gear on the flywheel when the starter is powered on. The pinion gear turns the engine flywheel at about 200 RPM. Since the flywheel is directly connected to the crankshaft, all engine components will then turn in sync and the engine starts.

Starter

When to replace the starter?

Starters are relatively durable but most will eventually fail in one or more of the following ways:

  • Intermittent operation of the starter. Starters can develop bad spots on the armature which will cause intermittent operation. This causes the starter to work sometimes and other times when you turn the key nothing happens.
  • Starter turns too slowly. Internal electrical and mechanical faults can cause the starter to draw too much current and in some cases the current drawn will exceed what the battery can supply. A consequence is the engine may not start as rapidly.
  • Unusual noises on starting. If you hear any type of grinding or other unusual noise while starting the engine, that should be investigated as the noise could reflect an internal starter failure or the noise could be due to pinion gear failure or flywheel ring gear damage.
  • Starter doesn’t function when turning the key. In some cases, the first symptom of a starter malfunction is a complete failure of the starter motor. This happens when you turn the ignition key to start the car, the starter motor does not function at all.

How do mechanics repair the starter?

  • If the starter is determined to be faulty, the battery must be disconnected prior to commencing any work. Once the battery is disconnected, the wiring to the starter is disconnected.
  • Starters are bolted to the engine block or the transmission case. Generally, there are two bolts. The procedure to access the starter varies across car models and can require removal, or lowering, of other vehicle components.
  • Once the starter is removed and a new starter is installed, the mounting bolts are tightened to the OEM factory torque specifications, the electrical connections are cleaned and re-attached to the starter and the starter is tested to confirm normal operation.

Is it safe to drive with a starter problem?

Once a vehicle engine is running, the starter is not in use. However, if you know that the starter is malfunctioning or working intermittently, you may be left stranded if you turn the engine off and the starter doesn’t function when restarting the engine. Should you know or suspect a problem with the starter, it is best to have the problem repaired to avoid being left stranded.

When replacing a faulty starter keep in mind:

  • Prior to replacing the starter, simple diagnostic tests should be performed to ensure that the problem is a faulty starter versus a weak battery, faulty neutral start switch, or other faulty electrical component in the starter motor circuit.
  • Starters draw large amounts of current from the battery, much more than any other electrically powered device in your car. This makes it important that the electrical connections to the battery are inspected, cleaned, and tightened as necessary. Cables to the starter should also be inspected for corrosion and replaced as needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(110)

Rating Summary
107
1
0
0
2
107
1
0
0
2

Robert

17 years of experience
81 reviews
Robert
17 years of experience
GMC Acadia Limited V6-3.6L - Check Engine Light is on - Maricopa, Arizona
I scheduled Robert last minute for a same day check on our engine light. He made out to my home and proceeded to finish his diagnostic on our suv. He went over and beyond working late into the night to get us answers. We will definitely be using him in the future !

Wayne

21 years of experience
17 reviews
Wayne
21 years of experience
GMC Sonoma V6-4.3L - Starter - Port Richey, Florida
Great fast friendly. Did the jod quickly but throughly and pointed everything out to watch for in the future. Not selling but informative.

Christopher

22 years of experience
79 reviews
Christopher
22 years of experience
GMC Yukon V8-6.2L - Starter - Suwanee, Georgia
Christopher is the BEST!!!!

Graham

22 years of experience
142 reviews
Graham
22 years of experience
GMC Yukon V8-6.2L - Starter - Elgin, Illinois
Will be requesting Graham for any future services!

Excellent Rating

(110)

Rating Summary
107
1
0
0
2
107
1
0
0
2
Number of GMC Car Starter Repair services completed
1210+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

P0375 OBD-II Trouble Code: Timing Reference High Resolution Signal B Malfunction
P0375 means the high resolution timing reference signals to the PCM have a problem, often due to a faulty camshaft or crankshaft.
How to Get Smog Technician Certified in Maryland
Automotive technician jobs include smog certified emissions inspectors. In Maryland, you must be hired by Envirotest to become an emissions inspector.
Bent Valves and Other Common Issues After a Timing Belt Snaps
Ignoring your timing belt can come with a high cost. Timing belts don’t often snap, but when they do, it can cause...

Alarm went off in Panic mode

This sounds like a good time to check the owner's manual to see if it mentions this at all. If it's an aftermarket alarm system, it may need to be manually reset through a certain procedure that is model specific....

Glow plug doesnt appear on dashboard 2000 VW Golf Diesel

Hello - the failure to get a "glow plug light" upon startup is most likely a fuse or switch issue, failing from repetitive use over time. Check these first. Also possible that one or more of the glow plugs (https://www.yourmechanic.com/question/changing-the-glow-plugs-by-steven-d)...

I have smoke coming from the inside of my car. Nothing was I dictating anything was wrong and it was on the driver side.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com