Geo Metro Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(18)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(18)

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Geo Metro Car Battery Replacement is $287 with $147 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1997 Geo MetroL4-1.3LService typeCar Battery ReplacementEstimate$456.16Shop/Dealer Price$535.05 - $763.62
1990 Geo MetroL3-1.0LService typeCar Battery ReplacementEstimate$440.29Shop/Dealer Price$515.70 - $737.80
1993 Geo MetroL3-1.0LService typeCar Battery ReplacementEstimate$440.29Shop/Dealer Price$515.72 - $737.84
1996 Geo MetroL3-1.0LService typeCar Battery ReplacementEstimate$447.15Shop/Dealer Price$524.30 - $751.56
1996 Geo MetroL4-1.3LService typeCar Battery ReplacementEstimate$447.15Shop/Dealer Price$525.77 - $754.14
1993 Geo MetroL4-1.3LService typeCar Battery ReplacementEstimate$465.99Shop/Dealer Price$547.99 - $789.49
1992 Geo MetroL3-1.0LService typeCar Battery ReplacementEstimate$440.29Shop/Dealer Price$515.74 - $737.87
1995 Geo MetroL3-1.0LService typeCar Battery ReplacementEstimate$447.15Shop/Dealer Price$524.30 - $751.56
Show example Geo Metro Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Geo mechanics

Real customer reviews from Geo owners like you.

Excellent Rating

(18)

Rating Summary
18
0
0
0
0
18
0
0
0
0

Neil

32 years of experience
6 reviews
Neil
32 years of experience
Geo Metro L3-1.0L - oil in the radiator and overflow,oil in carb need a diagnostic - Concord, California
He was patient with my questions and very informative regarding what I should do as it is a in shop engine problem . I look forward to using your service again Thanks sincerely Joy

Tinashe

14 years of experience
781 reviews
Tinashe
14 years of experience
Geo Metro L3-1.0L - Pre-purchase Car Inspection - Acworth, Georgia
Tinashe let me know when he was on his way to the inspection and called me once it was complete. He went over everything he found with me on the phone and also sent a complete and detailed report. Very thorough and I'm having him do another inspection for me this week. Definitely recommend his services if you are considering purchasing a vehicle on craigslist (or anywhere) and need a professional opinion.

Vladimir

11 years of experience
214 reviews
Vladimir
11 years of experience
Geo Metro L3-1.0L - Fuel Injector - Roseville, California
Very knowledgeable and punctual. A professional.

Theodore

17 years of experience
1794 reviews
Theodore
17 years of experience
Geo Metro L4-1.3L - Axle / CV Shaft Assembly Replacement (Driver Side Front) - Everett, Washington
Theodore is patient and a fast, hard worker!

Excellent Rating

(18)

Rating Summary
18
0
0
0
0
18
0
0
0
0
Number of Geo Metro services completed
198+
services done by our mechanics
TOTAL NUMBER OF EXPERT Geo MECHANICS
70+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Coolant Reservoir
Common signs include needing to constantly add coolant, finding coolant leaks, and the engine overheating.
P2202 OBD-II Trouble Code: Nitrogen Oxide Sensor (NOx) Sensor Circuit Low Input Bank 1
P2202 P2202 code definition Nitrogen Oxide Sensor (NOx) Sensor Circuit Low Input Bank 1 What the P2202 code means P2202 is an OBD-II generic code for the engine control module (ECM) on a diesel engine vehicle with a NOx sensor...
How to Report a Bad Driver
Bad drivers cause car accidents by driving too fast, tailgating, or ignoring road rules. Report reckless drivers to the authorities when you see them.

My car's fuel efficiency is poor and it starts rough

There is a valve that is by the fuel neck next to the fuel filler inlet that measures the fumes from the gas cap and related areas. This valve is known as the EVAP purge solenoid valve (https://www.yourmechanic.com/services/evaporation-vent-solenoid-replacement). This valve...

Radiator hose exploded.

Hi there. It sounds like there may be compression leaking past the cylinder head gasket into the cooling system. Does the vehicle overheat? Has it ever overheated? How does the engine run on a cold start? A good inspection by...

Code c0040 ABS

Hi there. Typically the Chevrolet unique code of C0040 is an indicator of an ABS sensor or module problem. You might want to review this video (https://www.youtube.com/watch?v=nachBPzhbvY) on how many mechanics diagnose the source of this issue and resolve it...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com