Ford Transit-350 Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(15)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(15)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Ford Transit-350 Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 Ford Transit-350V6-3.5L TurboService typeWindows InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2022 Ford Transit-350V6-3.5LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2018 Ford Transit-350V6-3.7LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2022 Ford Transit-350V6-3.5L TurboService typeWindows InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2020 Ford Transit-350V6-3.5L TurboService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2021 Ford Transit-350V6-3.5LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2017 Ford Transit-350V6-3.7LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2021 Ford Transit-350V6-3.5L TurboService typeWindows InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Ford Transit-350 Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(15)

Rating Summary
13
2
0
0
0
13
2
0
0
0

Angel

17 years of experience
106 reviews
Angel
17 years of experience
Ford Transit-350 V6-3.7L - Brake Pads Replacement (Rear) - Hollywood, Florida
Great Job. Will use again!!!

Jeshua

7 years of experience
131 reviews
Jeshua
7 years of experience
Ford Transit-350 V6-3.7L - Oil Change - Palmetto, Florida
This was my second time having Jeshua do my oil change. He was on time and finished quickly. He did a great job both times

Joel

30 years of experience
76 reviews
Joel
30 years of experience
Ford Transit-350 V6-3.5L Turbo - Brake Rotor/Disc Replacement (Rear) - Phoenix, Arizona
On time, efficient, and friendly!

Eliud

23 years of experience
202 reviews
Eliud
23 years of experience
Ford Transit-350 V6-3.7L - Brake Rotor/Disc Replacement (Rear) - Winder, Georgia
He came 30 min early to appointment. He fixed the van properly. Your mechanic kept to their price quote even though the mechanic took 1-2 hours longer then expected to complete the job!

Excellent Rating

(15)

Rating Summary
13
2
0
0
0
13
2
0
0
0
Number of Ford Transit-350 services completed
165+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

What Causes a Suspension to Collapse?
Every Every car, truck and SUV features a suspension, the system of parts that holds the vehicle up, absorbs bumps, and allows it to steer. For the most part these systems wear out slowly, and with proper maintenance and periodic...
A Buyer’s Guide to the 2012 Dodge Ram
While While Chrysler has decided to give Ram its very own division, it seems impossible not to think of the Ram 1500 as a Dodge. After all, you’ll still buy your 2012 Ram at a Dodge dealer, and it remains...
P2420 OBD-II Trouble Code: Evaporative Emission (EVAP) Switching Valve Control Circuit High
P2420 P2420 code definition Evaporative Emission (EVAP) Switching Valve Control Circuit High What the P2420 code means The P2420 trouble code indicates that the Engine Control Module (ECM) has detected a malfunction within the switching control circuit of the EVAP...

How do you remove the crossbars from the roof rack?

The crossbars on your SUV’s roof rack are what make it capable of carrying loads, but you might find that you need to remove them from time to time. Here’s how to do that: Loosen both thumbwheels. Slide the crossbar...

"No bus" code

When the No Bus message appears in your instrument cluster, its usually an indication that there is a problem with the powertrain control module or the wiring to it. This is also very likely the cause of your no start...

The vehicle is experiencing a lack off power.

Your throttle position sensor is a possibility if there is a spot along the sensor that is damaged. The vehicle data can be watched with a professional scan tool. As you sweep the throttle, you should see the voltage change...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com