Ford Transit-350 Cooling System Flush at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(15)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(15)

Cooling System Flush Service

How much does a Cooling System Flush cost?

On average, the cost for a Ford Transit-350 Cooling System Flush is $201 with $59 for parts and $142 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2019 Ford Transit-350V6-3.5L TurboService typeCooling System FlushEstimate$298.87Shop/Dealer Price$345.46 - $451.50
2018 Ford Transit-350V6-3.5L TurboService typeCooling System FlushEstimate$268.87Shop/Dealer Price$315.49 - $421.55
2018 Ford Transit-350L5-3.2L Turbo DieselService typeCooling System FlushEstimate$268.87Shop/Dealer Price$315.49 - $421.54
2017 Ford Transit-350V6-3.5L TurboService typeCooling System FlushEstimate$268.87Shop/Dealer Price$315.45 - $421.48
2017 Ford Transit-350L5-3.2L Turbo DieselService typeCooling System FlushEstimate$268.87Shop/Dealer Price$315.51 - $421.58
2015 Ford Transit-350L5-3.2L Turbo DieselService typeCooling System FlushEstimate$260.15Shop/Dealer Price$304.59 - $404.10
2018 Ford Transit-350V6-3.7LService typeCooling System FlushEstimate$276.37Shop/Dealer Price$322.78 - $428.68
2019 Ford Transit-350L5-3.2L Turbo DieselService typeCooling System FlushEstimate$276.37Shop/Dealer Price$323.34 - $429.66
Show example Ford Transit-350 Cooling System Flush prices

What is the cooling system flush all about?

Your cooling system is what keeps your car from overheating. It works by circulating a mixture of water and coolant through the engine. Over time the coolant mixture becomes contaminated with scale and rust, which can clog and damage the cooling system components. A cooling system flush essentially flushes out the entire system of contaminants and replaces the coolant mixture with fresh coolant and water.

Keep in mind:

Your mechanic will drain the fluid, clean the system with coolant cleaner, and use water to remove the remaining coolant. After cleaning the system, the mechanic will fill it up with new coolant. This process is effective and an approved industry method of flushing your vehicle’s cooling system.

How it's done:

  • Install flush chemical to radiator
  • Bring the car to operating temperature
  • Drain the old coolant
  • Close valve and refill with water
  • Repeat the process
  • Fill radiator with a 50/50 mixture of coolant and water
  • Check for leaks and fan operation

Our recommendation:

  • Some vehicles are equipped with a low coolant sensing system. Should this light come on, have your vehicle inspected for leaks or other possible causes for the low coolant level.

  • Follow the service maintenance schedule provided by the manufacturer to get the coolant replaced at regular intervals. In general, it is a good practice to change the coolant every 40,000-50,000 miles.

What are the common symptoms indicating you need to flush the cooling system?

  • Check Engine warning light is on
  • Low Coolant warning light is on
  • Engine is overheating

How important is this service?

A cooling system flush is an important part of preventative maintenance and helps to keep your car healthy and on the road.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(15)

Rating Summary
13
2
0
0
0
13
2
0
0
0

Jonathan

22 years of experience
23 reviews
Jonathan
22 years of experience
Ford Transit-350 V6-3.7L - Car is overheating - Fayetteville, North Carolina
Honest, much appreciated:)

John

27 years of experience
1019 reviews
John
27 years of experience
Ford Transit-350 V6-3.7L - Oil Change - Friendswood, Texas
After moving to Texas 6 years ago, John is the first mechanic I trusted and look forward to using again. He was right on time, did a great job, was very friendly and knowledgeable, and didn't try and sell me any extra Services except for what I had paid for. Highly recommend!

Jacob

12 years of experience
329 reviews
Jacob
12 years of experience
Ford Transit-350 V6-3.7L - Car is not starting - Dallas, Texas
Jacob was great. He arrived on time, explained everything he was doing, and double checked all his findings before making the diagnosis. He was very personable, knowledgable, and thorough. When he finished, he listed the options for repair and was honest about the best product and the most cost effective plan. It highly recommend Jacob.

Angel

17 years of experience
106 reviews
Angel
17 years of experience
Ford Transit-350 V6-3.7L - Brake Pads Replacement (Rear) - Hollywood, Florida
Great Job. Will use again!!!

Excellent Rating

(15)

Rating Summary
13
2
0
0
0
13
2
0
0
0
Number of Ford Transit-350 services completed
165+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

Are Wider Tires Better?
The The size and width of the tires on your vehicle determines how your vehicle will handle in different conditions. There are several factors that go into the decision of which tires to equip your vehicle with (https://www.goodyear.com/en-US/company/partner/yourmechanic?promoCode=YOURMECHANIC&utm_source=null&utm_medium=referral&partnerId=yourmechanic&partnerName=yourmechanic&retaggingLaunchUrl=%2F%2Fassets.adobedtm.com%2Flaunch-EN786b79de5697438cb1f8839bcd30487c.min.js&floodlightEnabled=true&liveChatEnabled=true&siteName=Goodyear+Tires), including: The...
P0012 OBD-II Trouble Code: Camshaft Position A - Timing Over-Retarded (Bank 1)
P0012 code definition Camshaft Position “A” - Timing Over-Retarded (Bank 1) What the P0012 code means P0012 is the OBD-II generic code...
P3473 OBD-II Trouble Code: Cylinder 10 Deactivation/Intake Valve Control Circuit/Open
P3473 means a cylinder was deactivated during certain driving conditions due to low oil pressure, faulty cylinder, or restricted oil passage.

We changed the alternator and battery and it ran for 24 hours and now it's doing the same thing and will run for 2 mins and die

Hello, and thank you for writing in. The vehicle may be having issues with the wiring, or it may be an issue with the replacement starter. Start by checking the condition of the starter cables, the battery's ground connection, and...

My check engine light came on and it had code p1151. What could cause that code?

Trouble code P1151 sets if the air/fuel ratio is out of range lean. Vacuum leaks in the intake are a typical cause but if the fault is not found there, there are actually quite a few potential trouble spots including:...

I just replaced the rear [struts](/topics-strut/) on my 98 [camry](/topics-camry/), they were monroe quick struts and I replaced them with the same, the old ones were around 8 years old and the suspension needed replacing, i just finished installing everything, i torqued everything to proper spec except the upper mount inside the car, can't get a torque wrench in there because its so tight and can't use a socket to tighten, had to use a combination wrench but I did get them tight, originally after installing before driving I heard squeaks when depressing the suspension but I wasn't so worried about that because they're brand new and haven't been depressed before, now after driving around the neighborhood with windows open listening for sounds I strained to hear anything but there wasn't anything over the sound of the car. After parking I hear a clunking sound after depressing one side of the car. I also replaced the stabilizer end links and the stabilizer bushings, the end links were really difficult to tighten, especially with a torque wrench but theyre at least at 25 ft/lbs which is the spec I found online, kind of concerned about that as well because I found a one off quote for the spec at 60 ft/lbs which I don't think is likely to be correct because in order to tighten you've got to grab this tiny round bolt housing on the ball joint in order to tighten and the tighter you want to get the tighter you need to squeeze on the round housing. Finally I'm a little concerned the stabilizer bar isn't centered, i mean it seems that way and it was difficult to get the clips around the new bushing back on, as in they really only fit one way and it was tough getting them threaded in the first place without a bunch of adjustment. I'm wondering what that clunking sound is, how to diagnose it, how to fix it, and anything else that could be an issue after the replacement.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com