Ford Freestar Oxygen Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(84)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(84)

Oxygen Sensor Replacement Service

How much does a Oxygen Sensor Replacement cost?

On average, the cost for a Ford Freestar Oxygen Sensor Replacement is $191 with $96 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Ford FreestarV6-3.9LService typeOxygen Sensor - Rear/Lower/Downstream ReplacementEstimate$306.11Shop/Dealer Price$363.89 - $514.73
2007 Ford FreestarV6-4.2LService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$366.41Shop/Dealer Price$440.16 - $632.12
2004 Ford FreestarV6-3.9LService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$366.41Shop/Dealer Price$440.16 - $632.12
2006 Ford FreestarV6-3.9LService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$366.41Shop/Dealer Price$440.13 - $632.07
2004 Ford FreestarV6-4.2LService typeOxygen Sensor - Rear/Lower/Downstream ReplacementEstimate$286.11Shop/Dealer Price$343.92 - $494.79
2007 Ford FreestarV6-3.9LService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$366.41Shop/Dealer Price$440.16 - $632.12
2005 Ford FreestarV6-3.9LService typeOxygen Sensor - Rear/Lower/Downstream ReplacementEstimate$291.11Shop/Dealer Price$348.77 - $499.52
2005 Ford FreestarV6-3.9LService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$372.91Shop/Dealer Price$446.97 - $639.16
Show example Ford Freestar Oxygen Sensor Replacement prices

What is the Oxygen Sensor all about?

With each new model year, manufacturers are adding more oxygen sensors to better manage engine operation. Some high performance engines have an oxygen sensor for each cylinder as well as one for the rear of each catalytic convertor. The sensors are located either underneath the hood or underneath the car. The oxygen sensors are connected (screwed) to the exhaust pipe, either in front or back of the catalytic converter. The front (upstream) sensors measure the amount of oxygen in the exhaust system. The purpose of the front oxygen sensor(s) is to measure how rich or lean the gases are as the gases exit the combustion chamber. Depending upon whether the exhaust gas is lean (high in oxygen content) or rich (low in oxygen content), the amount of fuel entering the engine is adjusted by the engine management computer to try and maintain an ideal mixture that produces the lowest emissions output from the catalytic convertor.

Rear (downstream) sensors are located behind the catalytic converter. The purpose of the rear oxygen sensor(s) is to monitor the oxygen content of the exhaust gases leaving the catalytic convertor.

If one or more of the oxygen sensors are faulty, your car may not pass the emissions test. If you drive your car with a faulty oxygen sensor, you may get poor gas mileage and it can damage the catalytic converter.

Oxygen Sensor-MATROX-1

When replacing the oxygen sensor remember:

  • Many oxygen sensors are damaged by leaking oil or coolant. If that is the case, the cause of that leak needs to be identified and repaired, or else the replacement oxygen sensor will be damaged as well.
  • New vehicles require specific oxygen sensors, and not the universal sensors that were common prior to 1996.

How it's done:

  • Scan the computer in the car for codes.
  • Inspect for vacuum leaks and holes in the exhaust system.
  • Remove and replace the oxygen sensor if it is bad.
  • Check electrical connections.
  • Check for proper operation of oxygen sensors.
  • Clear diagnostic codes.
  • Test drive car.

Our recommendation:

Keep up with the tune-ups. If check engine light is on, don't drive the car too long without getting it inspected. If check engine light is flashing, pull over and get the car towed to avoid costly repairs. Ask the mechanic to inspect the vacuum hoses and leaks in the exhaust system. If the vacuum hose or exhaust system is leaking, it will display an oxygen sensor fault code. Replacing an oxygen sensor may not fix the problem.

What common symptoms indicate you may need to replace the Oxygen Sensor?

  • Check Engine light is on.
  • Car is getting poor gas mileage.
  • Emission test fails.

How important is replacing the oxygen sensor?

Your vehicle has multiple oxygen sensors, and they all help the car run optimally. The front sensors measure how much oxygen is in the exhaust stream to measure how rich or lean the gases leaving the gas chamber are. The rear sensors measure the oxygen content of the gases as they leave the catalytic converter. The oxygen sensors then relay this information to your vehicle’s electronic control unit, so that it can adjust as necessary. Because cars depend on an ideal fuel-to-air ratio to function optimally, the oxygen sensors are leaned on for engine performance. When your oxygen sensors fail your car will run less smoothly, get worse mileage, and have worse emissions.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(84)

Rating Summary
76
3
1
2
2
76
3
1
2
2

Kevin

7 years of experience
27 reviews
Kevin
7 years of experience
Freestar 2006 - Check Engine Light is on - Orlando, FL
very prompt did his job and made sure to not leave any kind of mess

Richard

17 years of experience
34 reviews
Richard
17 years of experience
Freestar 2004 - Vehicle Diagnostic - Raeford, NC
Very professional he explained everything he was doing to my van great work and honest.

John

30 years of experience
444 reviews
John
30 years of experience
Freestar 2006 - Valve Cover Gasket - North Highlands, CA
John is awesome he went above and beyond what he was supposed to do even more so when he knows he had pulled the wrong Parts on my vehicle he had got that corrected

Phillip

16 years of experience
307 reviews
Phillip
16 years of experience
Freestar 2006 - Spark Plugs - North Highlands, CA
was on time professional got it done in a timely manner

Excellent Rating

(84)

Rating Summary
76
3
1
2
2
76
3
1
2
2
Number of Ford Freestar services completed
924+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Low Water Sensor
If your car has low coolant without a warning, the Coolant Light comes on for no reason, or the car is overheating, replace the low water sensor.
How Long Does a Low Oil Level Sensor Last?
Having Having the right amount of oil in an engine is important to the smooth running of your engine. In order for the engine on a car to run as intended, it will have to have the right amount of...
How to Replace a Coolant Level Sensor
Coolant level sensors are faulty if the coolant level sensor light stays on extensively or the engine overheats without the light coming on.

P0116 Code. Engine Temperature is high. Do I have air in my system? Water Pump issues?

Hi there. Check the thermostat by watching the coolant temperature gauge. When the engine gets hot and the thermostat opens up, then needle moves down a little bit. If the needle does not move and the system seems to be...

Where is the camshaft position sensor be located on a 2011 Kia Optima EX GDI?

Hello - the camshaft position sensor (https://www.yourmechanic.com/article/how-to-replace-a-camshaft-position-sensor-by-mia-bevacqua) is located on the drive-side end of the top of the engine on your vehicle. It is a round black plastic housing - golf-ball size - attached to the engine with one bolt,...

Where are the cam sensors located on 2009 Nissan Maxima vq35de engine? 2009 Nissan Maxima

Hello - the cam position sensors for this engine (2) are each located near the passenger side end of the cylinder head for each cylinder bank. The engine cover must be removed to access them, and the factory sensors have...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com