Ford Focus Timing Belt Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(10)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(10)

Timing Belt Replacement Service

How much does a Timing Belt Replacement cost?

On average, the cost for a Ford Focus Timing Belt Replacement is $661 with $227 for parts and $434 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Ford FocusL4-2.0LService typeTiming Belt ReplacementEstimate$981.82Shop/Dealer Price$1107.77 - $1458.06
2000 Ford FocusL4-2.0LService typeTiming Belt ReplacementEstimate$907.39Shop/Dealer Price$1026.78 - $1372.16
2003 Ford FocusL4-2.0LService typeTiming Belt ReplacementEstimate$951.19Shop/Dealer Price$1071.21 - $1417.07
2002 Ford FocusL4-2.0LService typeTiming Belt ReplacementEstimate$951.19Shop/Dealer Price$1071.21 - $1417.06
2001 Ford FocusL4-2.0LService typeTiming Belt ReplacementEstimate$1111.78Shop/Dealer Price$1240.47 - $1592.83
2016 Ford FocusL3-1.0L TurboService typeTiming Belt ReplacementEstimate$3112.26Shop/Dealer Price$3548.79 - $4813.84
Show example Ford Focus Timing Belt Replacement prices

What is a timing belt and how does it work?

An engine timing belt is a fiber reinforced, toothed drive belt manufactured using durable compounds such as highly saturated nitrile. The timing belt allows the crankshaft to drive the camshafts in the cylinder head at half the RPMs of the crankshaft. The camshafts then open and close the engine’s intake and exhaust valves in time with the movement and position of the pistons in the engine.

Timing Belt

When to replace the timing belt?

  • Every 60k-90k miles. If an engine is equipped with a timing belt, the timing belt must be replaced at the service interval specified by the vehicle manufacturer regardless of whether or not any problem is visible, typically in the range of 60,000 to 90,000 miles. Your vehicle owner’s manual should state the specific service interval.
  • Engine stops abruptly or will not start. Occasionally, timing belts can break, or skip, while the engine is running.
  • Rough engine operation. The molded, reinforced teeth on the timing belt engage gears on the crankshaft and camshafts. After many tens of thousands of miles, the teeth can wear or break, or the belt can stretch, thus causing the belt to jump position on the crankshaft or camshaft gears. Should the belt jump, the engine will run poorly and perhaps not at all.
  • Banging or clanking engine noise. On some engines, if the timing belt has jumped, the pistons and valves can collide and there will be noise and damage. These engine designs are referred to as interference engines. If your car has an interference engine, replacing the timing belt according to the maintenance schedule will minimize the chance that a belt failure will cause engine damage.

How do mechanics replace the timing belt?

Engine designs vary, and thus the replacement procedure will vary, but broadly, the procedure is as follows:

  • Disconnect the battery ground cable.
  • Once the engine is cold, set the crankshaft to top dead center with the number one piston on the compression stroke. Remove crankshaft pulley.
  • Remove all accessories interfering with the removal of the timing belt covers.
  • Remove timing belt covers. Lock camshafts, as required, and note position of camshaft timing marks. Remove timing belt tensioner and idler pulleys. Remove timing belt.
  • If replacing the water pump, do so at this time, and of course drain the cooling system first. If the engine cooling system thermostat is only accessible with water pump replacement, the thermostat should be replaced as well.
  • Installation of the new timing belt includes all of the above steps, performed in reverse, following strict guidelines to assure camshaft and crankshaft (and balancing shaft, if equipped) are in perfect alignment after tensioner has been set.
  • Upon completion of the installation, the engine crankshaft is turned by hand 720 degrees and the correct position of the timing marks on the crankshaft and the camshafts is confirmed.
  • The vehicle is road tested to confirm normal operation and a service sticker is affixed to the engine noting the date of belt replacement and the vehicle mileage.

Is it safe to drive with a timing belt problem?

No, were a worn out timing belt to snap while underway, perhaps on a highway, it creates a risk of complete loss of engine power while surrounded by fast moving vehicles. Once your vehicle has reached the recommended replacement mileage for the belt, you can eliminate the risk of sudden and unexpected timing belt breakage by having it replaced. If your engine is of the interference type, it is especially important to replace the belt according to the maintenance schedule because sudden breakage of the timing belt, while the engine is running, will likely cause significant damage to internal engine components such as the valves and pistons.

When replacing the timing belt keep in mind:

  • An interference engine should be carefully inspected before a broken timing belt is replaced because it may have sustained damage that will have to be repaired prior to installing a new belt.
  • The timing belt system includes idler pulleys and a belt tensioner. These components should be replaced along with the belt.
  • On some cars, the timing belt drives the engine’s water pump. Mechanics will usually recommend replacing the water pump at the same time that the timing belt is replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(10)

Rating Summary
10
0
0
0
0
10
0
0
0
0

Clifton

25 years of experience
335 reviews
Clifton
25 years of experience
Focus 2001 - Timing Belt - West Palm Beach, FL
Honest and quick work. My new go to guy for sure.

Jermaine

10 years of experience
9 reviews
Jermaine
10 years of experience
Focus 2010 - Brake System Flush - Stockbridge, GA
Great and professional ..

Jermaine

10 years of experience
9 reviews
Jermaine
10 years of experience
Focus 2010 - Valve Cover Gasket - Stockbridge, GA
Great and professional ..

Jermaine

10 years of experience
9 reviews
Jermaine
10 years of experience
Focus 2010 - Windshield Wiper Blade - Stockbridge, GA
Great and professional ..

Excellent Rating

(10)

Rating Summary
10
0
0
0
0
10
0
0
0
0
Number of Ford Focus Timing Belt Replacement services completed
110+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1800+
experts on our platform

Recent articles & questions

P2287 OBD-II Trouble Code: Injector Control Press Sensor Circuit Intermittent
P2287 P2287 code definition Injector Control Press Sensor Circuit Intermittent What the P2287 code means P2287 is an OBD-II generic code for the engine control module (ECM) detecting that the injector control pressure (ICP) sensor is intermittently not registering a...
How Long Does a Parking Brake Release Cable Last?
Your Your car’s parking brake is engaged and disengaged separately from your primary braking system. A steel cable runs from the lever or parking brake cable to the back to activate the brake, and a release cable triggers the mechanism...
How to Renew Your Car Registration in New Mexico
Making Making sure that your vehicle is legal to drive in your home state of New Mexico should be a priority. There are a number of fines that you will have to face if you do not have the car...

After smoking, car will not hold coolant.

You may have a leak in your radiator. If you poured more coolant into it and it came right back out a leak exists somewhere. If the leak is that fast, it should be obvious to the eye without having...

Engine races or revs while driving.

Hi There, This may be a sign of low transmission fluid (https://www.yourmechanic.com/services/transmission-fluid-service) or a faulty transmission control solenoid. As you’re going down the road, the car’s computer analyzes data being sent by vehicle speed sensors and engine speed sensors. Based...

I drove through a large puddle and water went over the roof,now my car shakes tremendously,can i still save her?

It sounds like you may have potentially got some of the critical sensors wet, which can cause them to send erratic signals to the vehicle's computer system. For example, if a crankshaft position sensor gets wet or is otherwise unable...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com