Ford Fairlane Serpentine/Drive Belt Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(649)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(649)

Serpentine/Drive Belt Replacement Service

How much does a Serpentine/Drive Belt Replacement cost?

On average, the cost for a Ford Fairlane Serpentine/Drive Belt Replacement is $144 with $49 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1960 Ford FairlaneL6-3.6LService typeSerpentine/Drive Belt ReplacementEstimate$241.63Shop/Dealer Price$283.29 - $385.77
1964 Ford FairlaneL6-2.8LService typeSerpentine/Drive Belt ReplacementEstimate$193.91Shop/Dealer Price$228.66 - $310.36
1966 Ford FairlaneL6-2.8LService typeSerpentine/Drive Belt ReplacementEstimate$193.91Shop/Dealer Price$228.66 - $310.36
1962 Ford FairlaneL6-3.6LService typeSerpentine/Drive Belt ReplacementEstimate$221.63Shop/Dealer Price$263.29 - $365.76
1966 Ford FairlaneL6-3.3LService typeSerpentine/Drive Belt ReplacementEstimate$221.63Shop/Dealer Price$263.32 - $365.83
1961 Ford FairlaneV8-5.8LService typeSerpentine/Drive Belt ReplacementEstimate$242.13Shop/Dealer Price$288.93 - $406.80
1970 Ford FairlaneV8-7.0LService typeSerpentine/Drive Belt ReplacementEstimate$226.63Shop/Dealer Price$268.17 - $370.56
1970 Ford FairlaneL6-4.1LService typeSerpentine/Drive Belt ReplacementEstimate$226.63Shop/Dealer Price$268.54 - $371.22
Show example Ford Fairlane Serpentine/Drive Belt Replacement prices

What is a serpentine belt and how does it work?

A serpentine belt is a relatively long, flat, multi-ribbed belt that is driven by the engine’s crankshaft pulley. The belt drives many, and often all, of the engine accessories such as the alternator, air conditioning compressor, power steering pump, water pump, and air pump. The serpentine belt is tensioned by a hydraulic or spring-loaded automatic tensioner. Some older cars use a serpentine belt to drive most accessories but will also have a shorter v-style belt to drive, for example, the power steering pump.

Belts

When to consider replacing the serpentine belt:

  • Regularly scheduled maintenance. Typically, belt manufacturers recommend belt replacement at 90,000 miles. However, the belt must be inspected for wear or damage at regular intervals prior to this high mileage.
  • Squealing noise, belt slippage, visible belt damage. Should the belt fail or wear out prematurely, you may hear noise or you may see visible signs of deterioration such as missing chunks of rubber, excessive cracking, or a shredded appearance on the edge of the belt.
  • Battery Light. A loose belt, perhaps caused by a defective tensioner, may not drive the alternator at adequate speed and thus the battery may discharge, causing the warning light to illuminate.
  • Engine overheating. Often, the serpentine belt drives the water pump. In those applications, if the belt breaks the engine will overheat in seconds to minutes. If the belt is inadequately tensioned, you may notice higher-than-normal engine operating temperature.

How do mechanics replace the serpentine belt?

  • Prior to removing the belt, the mechanic must run the engine to determine if the idler pulley and the belt tensioner are noise-free. Those rotating components have grease filled bearings and are subject to wear. In addition, the mechanic will ensure that all pulleys and accessories are turning in the same plane. These steps help make sure your new belt will operate trouble-free for its full-service life.
  • The belt’s routing path through the various components is noted. The belt tensioner is released, usually with a wrench or lever, to release the tension from the belt. With the tension off, the belt slides off the pulleys.
  • All rotating components — that is the alternator, air conditioner compressor, etc. — are checked for smooth operation and no noise.
  • If everything checks out, the new belt is slipped over all of the pulleys while holding the tensioner away from the belt. Once the belt is centered on all pulleys, the tensioner is released and the installation is complete. The engine is run to ensure normal operation.

Is it safe to drive with a serpentine belt problem?

No. Should the belt have visible damage, you risk unexpected and sudden breakage that could potentially leave you stranded. Serpentine belt problems that result in the alternator not charging may cause the battery to discharge, which will result in loss of electrical power to the vehicle. Additionally, if a deteriorated belt breaks and that belt drives the water pump, the engine will overheat in a matter of seconds.

When replacing the serpentine belt keep in mind:

  • On many cars, the expected service life of a serpentine belt is around 90,000 miles. Should the belt fail well prior to that, a very careful inspection should be performed to check for out-of-alignment pulleys, a possibly out-of-position crankshaft harmonic balancer on which the drive pulley is mounted, binding pulleys, or a defective belt tensioner.
  • Attention should always be given to serpentine belt routing, since proper routing is critical to proper belt tension, and function of the driven components.
  • Sometimes it is difficult to distinguish serpentine belt related noise from other engine noises. In these cases, a mechanic will determine the origin of the noise by momentarily running the engine without the serpentine belt attached.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(649)

Rating Summary
616
20
3
2
8
616
20
3
2
8

Miguel

10 years of experience
20 reviews
Miguel
10 years of experience
Ford Fairlane V8-4.7L - Brake System Flush - Chino Hills, California
Miguel showed up right on time, had ALL necessary parts and equipment, finished in a timely manner, and was very polite and respectful.

Sergey

9 years of experience
28 reviews
Sergey
9 years of experience
Ford Fairlane V8-4.7L - Car is not starting - Roseville, California
great job.

Attila

19 years of experience
906 reviews
Attila
19 years of experience
Ford F-150 V8-5.4L - Serpentine/Drive Belt - Newark, New Jersey
Very professional and knowledgeable. Would use again.

Joseph

20 years of experience
640 reviews
Joseph
20 years of experience
Ford F-150 V8-5.4L - Serpentine/Drive Belt - West Jordan, Utah
Joseph was on time, efficient, friendly, fast and explained everything he did. Excellent service . Thank you Joseph!

Excellent Rating

(649)

Rating Summary
616
20
3
2
8
616
20
3
2
8
Number of Ford Serpentine/Drive Belt Replacement services completed
7139+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

Understanding Electric Vehicles
For For people who grew up in a world where electric vehicles (EVs) existed only in cartoons and science fiction movies, seeing one pull up alongside you at a red light is still an unusual sight. Still, every day there...
P0059 OBD-II Trouble Code: Heater Circuit Resistance (Bank 2 Sensor 1)
P0059 P0059 trouble code definition The definition of diagnostic trouble code p0059 is that the resistance for the heater circuit of bank 2 sensor 1 oxygen sensor is not correct. What the P0059 code means When this trouble code sets...
How to Buy a Personalized License Plate in All States
Buying a personalized license plate gives your car an extra special touch. Check out how to obtain one depending on which state you live in.

Car starts, but won't go forward

The fluid would not be an issue unless the fluid has leaked out. The transmission fluid shouldn't need to be changed or flushed out in this case. The transmission front pump may have failed due to leaking internal seals. The...

What is the specific torque for the rod bearing of a 2001 Acura 3.2 TL?

Hello, thanks for writing in about your 2001 Acura TL.According to AllData, the specifications are: Connecting Rod Bolt Torque 20 N-m (2.0 kgf-cm, 14 lbf-ft) If you end up needing any help with your vehicle, consider YourMechanic, as one of...

What holds the slave e cylinder rod in place

Hi there. The rod should be held in place by the slave cylinder; the rod has a notch on one end where the small opening of the boot holds and a smaller diameter portion at the other for insertion into...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com