Ford F-250 HD Car is slow to accelerate Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(12)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(12)

Car is slow to accelerate Inspection Service

How much does a Car is slow to accelerate Inspection cost?

On average, the cost for a Ford F-250 HD Car is slow to accelerate Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1997 Ford F-250 HDV8-5.8LService typeCar is slow to accelerate InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1997 Ford F-250 HDV8-7.5LService typeCar is slow to accelerate InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1997 Ford F-250 HDV8-7.3L Turbo DieselService typeCar is slow to accelerate InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example Ford F-250 HD Car is slow to accelerate Inspection prices

A car that is getting fuel and is properly tuned should take off quickly when the accelerator is pressed. A vehicle that is sluggish or slow to accelerate can be dangerous, especially at intersections and on-ramps.

Modern cars have a very complex system that delivers fuel to the engine and rids of the vehicle of exhaust gases. A failure in any part of this system can lead to a car that is slow to accelerate. In the majority of cases, the problem can be traced back to the fuel system.

A vehicle that is slow to accelerate should be repaired immediately as it can be dangerous to drive.

How this system works:

The fuel system is responsible for supplying fuel to the engine. Fuel is mixed with air, atomized and vaporized in the intake system, which provides power to drive the pistons of the engine. There are a variety of different fuel system types but most of them have the same basic parts.

The fuel tank stores the gasoline. Fuel is pulled through the fuel lines by the fuel pump and is fed into the fuel injectors. Older cars have a carburetor and throttle body injectors instead of fuel injectors. The fuel injectors spray gasoline into the cylinders where it is mixed with air and then ignites during the compression stage. The result is an explosion that moves the pistons.

Common reasons for this to happen:

  • Bad or Clogged Fuel Injector: Fuel injectors can become clogged due to contaminates in the fuel. Fuel injectors, by their very nature, must be very precise in controlling the amount of fuel that goes into the combustion chamber so they have very small passages that deliver the fuel. Over time these tiny passages will become clogged which impedes the delivery of fuel.

When an injector is clogged it can degrade the performance of the vehicle and the car may accelerate slowly or feel that it does not have enough power. Other symptoms include a rough idle, a vehicle that is hard to start and a decrease in fuel efficiency.

  • Defective Fuel Pump: The fuel pump pulls the fuel from the gas tank to the engine via the fuel lines. If the pump stops working, malfunctions, or becomes clogged, it will not supply enough fuel to the injectors. This can cause the vehicle to accelerate slowly, or even sputter and stall, especially at high speeds.

  • Clogged Fuel Filter: The job of the fuel filter is to filter out containments in the fuel and if it becomes clogged it can restrict the amount of fuel that reaches the injectors. This can cause a vehicle to accelerate slowly. Fuel filters are designed to be replaced on a regular basis.

  • Dirty Airflow Sensor: This part detects the mass of air that enters the fuel injection system and hands that information off to the engines’ computer which allows the computer to deliver the proper amount of fuel to the air. These sensors can become dirty or malfunction over time, which results in the wrong data being sent to the computer. A slow accelerating car is the result of this incorrect data. It may also trigger the Check Engine light.

  • Leaking Fuel Line: A leak in the fuel line will drain off enough fuel that it leaves a shortage for the injectors. This not only affects the performance of the car but will also create a dangerous situation. If you smell gasoline in the vicinity of the car or see a puddle of fuel underneath the vehicle, the car should be inspected and repaired immediately.

  • Vacuum Leak: A leak in the vacuum system can affect the ability of the car’s computer system to properly regulate the fuel to air ratio. One of the major symptoms of a vacuum leak is a car that is slow to accelerate or feels like it has a lack of power. In addition the check engine light will probably illuminate.

  • Failing Catalytic Converter: A failing or clogged catalytic converter will prevent the proper amount of air from going into the engine. In most cases the vehicle will run hotter than normal, will accelerate slowly and feel like there is a loss of power. Issues with the catalytic converter tend to be fairly expensive repairs.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the car is slow to accelerate issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will check your car's fuel system for leaks and any defective parts. This includes fuel injectors, fuel pump, fuel filter, airflow sensors and other important components related to the vehicle's slow acceleration. It may be necessary to test drive the car in order to verify the acceleration issue and provide an accurate diagnosis.

How important is this service?

A car that accelerates slowly is a dangerous vehicle to drive, especially at intersections and on ramps. Failing to fix simple fuel system problems will often lead to a more expensive repair down the road and eventually a car that may not run at all. A slow accelerating car should be inspected and repaired as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(12)

Rating Summary
10
1
0
0
1
10
1
0
0
1

Edgar

14 years of experience
38 reviews
Edgar
14 years of experience
Ford F-250 HD V8-5.8L - Distributor - New Milford, New Jersey
He did a great job. On time and got my truck fixed in no time. Highly recommend Edgar .

Chris

22 years of experience
2266 reviews
Chris
22 years of experience
Ford F-250 HD V8-7.3L Turbo Diesel - Car is making a noise - Costa Mesa, California
Super knowledgeable, quick, fixed my problem right on the spot!

Patrick

11 years of experience
159 reviews
Patrick
11 years of experience
Ford F-250 HD V8-7.3L Turbo Diesel - Starter - Mesa, Arizona
Patrick seemed very knowledgeable, and was very friendly.

Anderson

27 years of experience
91 reviews
Anderson
27 years of experience
Ford F-250 HD V8-7.5L - Spark Plugs - Brooklyn, New York
Anderson was kind, knowledgeable, professional, and thorough, and was prepared for tasks and repairs unrelated to my reason for hiring him. During the job he discovered a rotted break line and fixed it right away.

Excellent Rating

(12)

Rating Summary
10
1
0
0
1
10
1
0
0
1
Number of Ford F-250 HD services completed
132+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Chrysler 200
In In 2011, Chrysler completely overhauled, updated, and remodeled their entire line, including the introduction of the new Chrysler 200. This reimagining of the old, boring Dodge Sebring sedan was already an exciting move for Chrysler, and the 2012 Chrysler...
P0818 OBD-II Trouble Code: Driveline Disconnect Switch Input Circuit
P0818 means there is an issue with the transfer case neutral position switch, likely due to a faulty connector or wire.
B1905 OBD-II Trouble Code: Air Bag Crash Sensor #2 Feed/Return Circuit Short to Battery
B1905 means there is a circuit error with the airbag crash sensor #2, likely due to a bad sensor or defective electrical components.

Code P0303 cylinder 3 misfire

The symptoms you describe along with the blinking Check Engine Light and P0303 trouble code definitely tell us that you have a misfire in cylinder number 3 (https://www.yourmechanic.com/article/p0303-obd-ii-trouble-code-cylinder-3-misfire-detected-by-spencer-clayton_2). Your engine uses a coil on plug system. This means each individual...

Crankshaft sensor removal

Hello, thank you for writing in. The crankshaft position sensor is located on the front of the engine. The hardest part is locating the sensor and removing in within tight quarters. You will find the sensor next to the drive...

How much does this cost

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com